Urethane Foam Bumpers Hex Shaped 3/8" Diameter, 1/8" Thickness, White - 1000 Box Qty

Urethane Foam Bumpers For Doors And Drawers

Urethane foam bumpers from Atlantic Gasket provide soft contact points on cabinet doors and drawers, so door edges land on a cushioned pad instead of hard surfaces, which helps control impact on work surfaces and cabinet frames. The hex-shaped soft urethane sponge pads create multiple small contact edges, which help these bumpers sit securely on flat door corners and frames where installers regularly place stops. The 3/8 inch width gives each bumper enough face area to catch door and drawer fronts, so contact stays consistent across typical cabinet overlays in shops and onsite work. The 1/8 inch thickness sets a modest stand-off, so doors rest slightly off the case, which helps reduce direct surface-to-surface contact on finished cabinet components. The white color option supports use on light-colored cabinets and interiors, which helps these bumpers blend into common residential and commercial casework.

Key Urethane Bumper Details That Help On Site

• Designed for cabinet doors and drawers, these bumpers serve as contact points at closing, so installers can control how doors and drawers land against the case and protect finished work surfaces in daily use.
• Hex-shaped soft urethane sponge pads distribute compression across their shape, so the bumper deforms gently when a door closes and helps soften impact on hinges, slides, and cabinet fronts.
• The self adhesive backs allow direct application to clean cabinet surfaces, so installers can position bumpers exactly where they want closing contact without separate mechanical mounts.
• A 3/8 inch wide face gives a larger contact spot than small dots, so misaligned or slightly warped doors still strike the bumper pad instead of cabinet frames or adjacent fronts.
• The 1/8 inch thick profile creates a controlled gap between moving fronts and the cabinet body, so painted or laminated surfaces avoid direct rubbing at every open and close cycle.
• Availability in brown or white allows selection to match light or dark cabinet schemes, so bumpers are less visually prominent in finished kitchens, baths, and casework installations.

Adhesive Bumper Fit, Size, And Placement Uses

These door and drawer bumpers are 3/8 inch wide and 1/8 inch thick, so installers can plan clearances knowing exactly how far the bumper will project from the mounting surface, which supports predictable overlay and reveal lines. The self adhesive backs let each pad bond directly to door corners, drawer fronts, or cabinet frames, so installers can fine-tune closure points without additional hardware steps. Because the bumpers are designed for cabinet doors and drawers, they align well with common face frame and frameless layouts, which helps maintain consistent contact positions from cabinet to cabinet along a run. The hex-shaped urethane sponge construction gives a soft feel at closing, so pressure spreads through the pad rather than a sharp point, which supports smoother day-to-day operation on installed casework.

How These Atlantic Gasket Bumpers Work In Practice

Using Hex-Shaped Urethane Bumpers On Cabinets

These Atlantic Gasket urethane foam bumpers are hex-shaped soft urethane sponge pads, so their multi-sided profile offers several flat facets for contact on doors and drawers as they close. Designed for application on cabinet doors and drawers, they support use at upper and lower corners of door rails, drawer fronts, and case edges where a defined stop point is needed. The 3/8 inch width lets each pad cover a reasonable portion of the door edge, so the closing force does not concentrate on a tiny point, which helps reduce localized marking on finished substrates. With a 1/8 inch thickness, these pads provide a controlled offset between the closing surface and the cabinet body, which creates a small, repeatable gap that helps reduce squeaks and direct finish contact on painted, stained, or laminated work surfaces in shops and field projects.

Why Thickness, Shape, And Color Help Workflow

The 1/8 inch thick design means installers know the stand-off they are adding when placing these bumpers, which simplifies planning for hinge adjustment and drawer front alignment during cabinet installation. The hex-shaped profile combined with urethane sponge construction lets the pads compress predictably at contact, which helps maintain a soft stop while still supporting the door or drawer in its closed position across repeated use. Availability in brown or white allows selection that works with light or dark cabinet finishes, which helps keep the visual focus on the cabinet design rather than the bumper pads when doors are open. Because these bumpers are part of Atlantic Gasket door and drawer bumper solutions, they integrate naturally into shops that standardize on similar components, which supports consistent fit and appearance from job to job.

Common Questions About 3818WH-1000 Cabinet Bumpers

Selecting These Bumpers For Cabinet Projects

The Atlantic Gasket urethane foam bumpers with 3/8 inch width, 1/8 inch thickness, and self adhesive backs give cabinet installers a defined, cushioned stop for doors and drawers. Their hex-shaped soft urethane sponge pads and brown or white finish options support both function and appearance on a range of casework. For projects that call for consistent contact points on cabinet doors and drawers, use the 3818WH-1000 bumpers to establish predictable closing behavior across your runs.