KHFB Flush-Mount Hanging File Bracket For Drawers

KHFB Flush-Mount Hanging File Bracket from Kinetron Corporation is a file drawer component designed to support Pendeflex-style hanging file rails in custom or production drawer boxes. The bracket is constructed of 16 gauge steel, which provides a solid, rigid support point for the aluminum file rail so the hanging files track consistently along the drawer side. This bracket is intended for drawer construction systems where a dedicated file drawer layout is needed in cabinets or casework. As a drawer box accessory, it ties directly into the side, front, or back material, giving the installer a defined, repeatable mounting interface for organizing file rails across multiple projects.

Key Drawer File Bracket Details For Pros

• The bracket is constructed of 16 gauge steel, which creates a sturdy mounting base for the 1/8 inch thick file rail and supports smooth file movement under normal drawer use.
• The bracket is designed to affix 1/8 inch thick file rail, so it matches the specified Pendeflex hanger rail and helps avoid mismatch between support hardware and rail thickness.
• The bracket is designed to be flush or surface mounted to interior drawer box side, front, or back material, allowing installers to position hanging file rails exactly where the cabinet layout requires.
• The Pendeflex hanger rail is constructed of 1/8 inch thick aluminum flat stock, giving a rigid but lightweight track for hanging files that works in combination with the steel bracket.
• The rail is available in Plain Aluminum or Black finishes and in 1/2 inch and 3/4 inch heights, which gives flexibility to match visual preference and vertical file spacing when planning drawer internals.
• #6 screws are required with this bracket, so the installer can plan fastening points and select appropriate screw length to suit the specific drawer box material.

Flush-Mount File Bracket Installation Use

This flush-mount hanging file bracket is designed to fasten directly to the interior of the drawer box side, front, or back, which lets the installer align file rails to the desired front-to-back or side-to-side orientation. Because the bracket works with 1/8 inch thick Pendeflex hanger rail, the rail sits positively in the bracket and creates a defined reference line for hanging folders. The requirement for #6 screws gives a clear fastener standard when laying out pilot holes in typical drawer box materials. Together, the steel bracket and aluminum rail function as a dedicated file drawer solution within broader drawer construction systems and drawer box accessories.

Using This File Drawer Component In Projects

Where This Hanging File Bracket Is Applied

This Kinetron Corporation hanging file bracket is intended for use in file drawer components within drawer construction systems, especially where Pendeflex-style hanging file storage is required in office, residential, or commercial cabinetry. By mounting to the interior side, front, or back of the drawer box, the bracket defines the position of the 1/8 inch thick aluminum Pendeflex hanger rail along the drawer interior. The 72 inch long rail can be cut and used with brackets at the ends or intermediate points so the file support runs the length needed for the drawer design. Because the rail is available in Plain Aluminum or Black and in 1/2 inch and 3/4 inch heights, the cabinetmaker can coordinate visual appearance and vertical clearance for files while keeping the bracket as the structural anchor. In practice, this allows a consistent file layout across multiple drawer boxes while relying on the same bracket geometry.

Why The Verified Bracket Details Matter

The 16 gauge steel construction of the KHFB flush-mount bracket provides a rigid anchor for the 1/8 inch thick aluminum flat stock rail, which helps maintain alignment of hanging files over time as drawers open and close. The flush or surface-mount design to drawer box side, front, or back material simplifies layout because the installer works off the interior drawer faces instead of secondary framing. Using a matching 1/8 inch thick Pendeflex hanger rail means the rail nests correctly in the bracket and reduces play that could affect file tracking. The 72 inch rail length allows longer runs to be cut from a single piece to suit various drawer widths, aiding efficient shop workflow. Specifying #6 screws to fasten the bracket standardizes the pilot and driver setup in the shop, supporting repeatable installation across full box quantities used in larger projects.

Common Questions About This Hanging File Bracket

Selecting This Bracket For File Drawer Builds

The KHFB Flush-Mount Hanging File Bracket, Zinc, from Kinetron Corporation is specified as a file drawer component within drawer box accessories, built from 16 gauge steel to support 1/8 inch thick Pendeflex hanger rails. With its flush or surface-mount design to interior drawer box side, front, or back material and its #6 screw requirement, it offers a defined method for adding hanging file storage to drawer construction systems. For projects that use 1/8 inch thick aluminum Pendeflex hanger rail in Plain Aluminum or Black and in 1/2 inch or 3/4 inch heights, this bracket provides the structural support needed to implement a consistent file drawer layout across multiple cabinets.