Lavi Bright Brass Elbow Fitting 1-1/2" D 90 Degree, 00-732/1H
Description
Lavi Bright Brass Elbow Fitting For Rails
Lavi bright brass elbow fitting connects 1-1/2 inch bar or foot rails at a 90 degree angle, which creates a clean corner transition that keeps the rail layout consistent. This elbow is part of the Lavi Industries bar and foot railing and accessories line, so it matches other coordinated components from the same system. The fitting has a bright brass finish made of solid brass, giving the rail corner a uniform brass look that ties in with other bright brass rail parts. As a builders hardware component within bar and foot railing and accessories, this elbow fitting supports rail layouts in bar fronts, counters, or similar runs where a right-angle turn is required.
Key Rail Fitting Details For Job Planning
- The 1-1/2 inch diameter design matches 1-1/2 inch rail, so the elbow maintains the same visual profile at the corner, which helps the rail look continuous around 90 degree turns.
- The 90 degree configuration sets a right-angle change of direction, which simplifies layout when planning bar or foot rail runs that follow outside or inside corners.
- The bright brass finish made of solid brass presents a consistent brass appearance at the joint, which supports a unified look across visible rail sections.
- The elbow fitting sits within the bar and foot railing and accessories category, so it serves as a dedicated corner component in a coordinated railing setup.
- The product is from Lavi Industries, which keeps the finish and styling aligned with other Lavi bright brass rail and fitting pieces on the same installation.
Rail Corner Layout And Installation Fit
The 1-1/2 inch Lavi bright brass elbow fitting sets the corner geometry for 90 degree rail turns, so installers can align straight rail sections to this fitting for consistent direction changes. The 90 degree layout also helps when transferring measurements from plans to site, because each corner uses the same right-angle fitting. With a bright brass finish made of solid brass, the elbow presents a finished corner appearance that visually matches adjoining bright brass rail pieces. As part of the bar and foot railing and accessories family, this elbow fitting plays a defined role in shaping bar front or counter rail runs that need clean, right-angle transitions.
Using This Brass Elbow In Bar Rail Runs
Where This Lavi Elbow Fitting Is Used
This Lavi bright brass elbow fitting is used at 90 degree corners in 1-1/2 inch bar or foot railing layouts, so it creates direction changes without breaking the visual line of the rail. In bar and foot railing and accessories applications, the elbow sits at outside or inside corners along bars, counters, or foot rests where a right-angle turn is required. Because the elbow fitting shares the same 1-1/2 inch diameter as the rail, the transition through the corner maintains the same cross-section, which supports a consistent appearance along the run. The bright brass finish made of solid brass lets the corner match bright brass rail segments, which keeps the overall bar front presentation uniform.
Why These Rail Fitting Details Matter
The 1-1/2 inch diameter on this elbow fitting matters because it allows installers to pair it with 1-1/2 inch rail, helping the joint align smoothly and maintain a straight visual line through the 90 degree turn. The defined 90 degree angle makes layout more predictable, since each corner shift is set by the elbow rather than by field-formed bends, which supports repeatable results on multi-corner rail runs. Having a bright brass finish made of solid brass at the corner means the joint reads as part of the same bright brass system as straight sections, so the finished bar or foot rail does not visually step down at the turn. As a Lavi Industries bar and foot railing and accessories component, this elbow fitting fits into a coordinated family of parts, which supports straightforward planning of matching corners, straights, and other railing pieces on the same installation.
Questions About This Brass Rail Elbow
What rail size does this elbow fitting connect?
The Lavi bright brass elbow fitting connects 1-1/2 inch rail, so it aligns with 1-1/2 inch bar or foot railing runs that need a consistent diameter through 90 degree corners.
What angle change does the Lavi elbow provide?
The elbow fitting provides a 90 degree turn, so it sets a right-angle change of direction for bar or foot rail layouts at corners.
What is the finish and material of this elbow fitting?
The elbow has a bright brass finish made of solid brass, so the corner presents a uniform brass look that matches bright brass rail components.
Where is this elbow used within a railing run?
The elbow fitting is used at 90 degree corners in bar and foot railing and accessories layouts, so it transitions straight runs around right-angle turns.
Who manufactures this bright brass elbow fitting?
The elbow fitting is manufactured by Lavi Industries, so it aligns with other Lavi bar and foot railing and accessories components.
What is the manufacturer part number for this elbow?
The elbow uses manufacturer part number 00-732/1H, which identifies this specific 1-1/2 inch, 90 degree bright brass fitting in the Lavi line.
Select This Elbow For Bright Brass Rails
The Lavi bright brass elbow fitting 1-1/2 inch D 90 degree, 00-732/1H, gives bar and foot rail projects a defined right-angle corner that matches bright brass rail sections in size and appearance. Adding this fitting into the layout links 1-1/2 inch straight runs through 90 degree turns while maintaining a consistent bright brass finish made of solid brass at each corner. For bar fronts, counters, or foot rail runs built around right-angle geometry, this Lavi Industries elbow fitting provides a coordinated corner component within the broader bar and foot railing and accessories family.
