Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Bosch roundover router bit 5/16 radius creates smooth, uniformly rounded edges, so you can produce consistent profiles on multiple workpieces without constant rework. The bit forms a 5/16 inch radius, giving a defined yet comfortable corner that suits many cabinet, furniture, and trim details. With a 1-1/8 inch diameter, it has enough cutting width to form the full profile in one controlled pass on typical stock. The 1/4 inch shank diameter matches routers set up for quarter-inch bits, which helps keep tool setups straightforward in smaller routers or laminate trimmers. Bosch identifies this router bit as model 85295M, so the part number ties directly to the 5/16 inch radius roundover profile specified for this tool.
This Bosch router bit uses a 1/4 inch shank, so it is intended for routers or trimmers that clamp quarter-inch shank tooling during profiling work. The bit diameter of 1-1/8 inches means the cutting edges sweep a relatively wide path, which helps the 5/16 inch radius form cleanly along the edge. Bosch specifies that a lower depth setting produces a rounded corner with a decorative bead, so adjusting the height shallower lets the bearing reference the edge while leaving a small bead detail. When the depth is set to expose more of the cutter, the bit forms a smooth, uniformly rounded edge that simplifies sanding and finishing.
This Bosch roundover router bit with 5/16 inch radius is suited to creating smooth, uniformly rounded edges on workpieces where a softer corner is preferred. The profile can support cabinet components, shelving, trim, or furniture parts that need a consistent edge detail along the grain or across end grain. Because the bit measures 1-1/8 inches in diameter, it can handle typical edge passes while maintaining control over the cut. The 2-1/16 inch overall length gives enough reach for edge profiling setups while keeping the cutting geometry compact for stable handling during routing operations on standard jigs or fences.
Bosch notes that a lower depth setting on this 85295M bit produces a rounded corner with a decorative bead, so depth adjustment directly controls how much bead appears alongside the main roundover. This allows the same 5/16 inch radius tool to serve both as a simple roundover and as a decorative profiling bit, depending on how high or low it is set relative to the workpiece edge. When the cutter depth is raised to expose more of the radius, it produces a smooth, uniformly rounded edge that simplifies follow-up finishing on running parts. When the depth is reduced, the resulting bead can visually separate an edge, adding a subtle profiling line that can be repeated across matching components with the same router setting.
The Bosch 85295M roundover router bit cuts a 5/16 inch radius profile, so it forms a smooth, uniformly rounded edge suitable for softening sharp corners on cabinet, trim, or furniture parts.
The Bosch 85295M roundover bit at a lower depth setting produces a rounded corner with a decorative bead, allowing one bit to handle both simple rounding and more decorative profiling.
The Bosch roundover router bit 5/16 radius has a 1/4 inch shank diameter, so it is suited to routers or trimmers equipped to hold quarter-inch shank bits for profiling work.
The Bosch 85295M roundover router bit has a 1-1/8 inch diameter, giving a wide enough cutting path to form the full 5/16 inch radius edge in a controlled pass.
The Bosch roundover bit measures 2-1/16 inches in overall length, providing sufficient reach for edge profiling while keeping the tool compact for stable routing.
The Bosch 5/16 inch radius roundover bit is suited to smooth, uniformly rounded edges on cabinet parts, shelving, trim, and similar woodworking pieces needing consistent profiling.
The Bosch roundover router bit 5/16 radius combines a defined 5/16 inch profile, 1/4 inch shank, and 1-1/8 inch diameter to support consistent edge work on many woodworking projects. The 85295M design allows both smooth, uniformly rounded edges and a rounded corner with decorative bead by changing depth settings. That flexibility lets one Bosch router bit handle everyday edge softening and more detailed profiling on matching workpieces. Selecting this Bosch router bit gives a clear, repeatable geometry tied directly to the 85295M part number for ongoing cabinet and trim runs.
Sold In: 1 Each
