Bosch rounding over router bit 1/4 shank is a 2-1/4 inch x 1/2 inch radius corner roundover bit built for profiling wood edges with a consistent shape, so installers and shop users can produce repeatable decorative corners. This router bit is part of the Bosch profiling router bits class, so it is designed for edging and contour work on woodworking projects that call for a controlled profile. The 2-flute design supports a smooth cut path, which helps deliver clean, uniform edges along cabinet parts, trim, or other routed pieces. A lower depth setting produces a rounded corner with a decorative bead, allowing the same bit to create a soft edge and visual detail in one pass when set correctly. The bit produces smooth, uniformly rounded edges, which helps reduce sanding time and keeps finished parts looking consistent across multiple workpieces.
This Bosch router bit uses a 1/4 inch shank, so it mounts into router collets sized for 1/4 inch shank tooling, supporting use in small or mid-size routers typically used for edge detail. The lower depth setting produces a rounded corner with a decorative bead, so depth adjustment on the router directly controls how much of the bead and radius engage the workpiece, giving users a straightforward way to fine-tune the profile. As a rounding over bit designed for profiling, it focuses the cut along the edge rather than deep material removal, which helps maintain control when following cabinet door frames, shelving edges, or trim blanks. The 2-flute layout further supports controlled passes by balancing cutting forces, which is useful when running along long edges where tracking and surface finish matter.
This 2-1/4 inch x 1/2 inch radius corner roundover bit from Bosch fits edge profiling tasks where a consistent curved corner is required along exposed parts. In cabinet shops or millwork operations, the rounding over geometry helps turn square stock into finished edges on doors, face frames, shelves, and trim, giving a uniform look from piece to piece. The lower depth setting function that produces a rounded corner with a decorative bead allows the same bit to add both a softened touch point and a visual accent line, which is helpful when a project calls for a modest, repeatable detail rather than multiple complex profiles. Because it is a router bit in the profiling category, it supports operations focused on edge shaping rather than bulk stock removal, aligning well with final-pass work after panels and parts are brought to size.
The Bosch 85297M router bit is specified as a 2-flute design, so each revolution uses two cutting edges to engage the material, which promotes a smoother finish that reduces cleanup time between routing and finishing. The bit produces smooth, uniformly rounded edges, which helps keep profiles looking alike across long runs of parts, such as multiple cabinet doors or shelving components. With depth of cut controlling how the rounded corner and decorative bead appear, installers and woodworkers can rely on the lower depth setting to expose just the intended portion of the profile, making it easier to match an existing edge detail on replacement work or add the same look throughout a new installation. The 1/4 inch shank configuration allows this profiling bit to work in routers sized for 1/4 inch shank tooling, which supports use in lighter, more maneuverable routers often preferred for edge work and onsite adjustments.
The Bosch 85297M router bit creates a rounded corner, and at a lower depth setting it produces a rounded corner with a decorative bead, giving both a softened edge and a defined visual line.
The 1/4 inch shank fits routers with a 1/4 inch collet, which aligns with many compact and mid-size routers commonly used for edge profiling and detail work on cabinets and trim.
The 2-flute design provides two cutting edges, helping the Bosch rounding over router bit cut more smoothly and leave a more uniform surface along routed edges.
The 1/2 inch radius defines how much the corner is rounded, so it sets the size of the curve on doors, shelves, or trim where a substantial, consistent edge profile is desired.
On this bit, a lower depth setting exposes the bead portion of the profile, so changing depth lets the user choose between a plain roundover and a roundover with a decorative bead.
This Bosch profiling router bit is specified for rounding over edges, so it suits general edge work where smooth, uniformly rounded corners and a consistent profile are required.
The Bosch rounding over router bit 1/4 shank combines a 2-1/4 inch x 1/2 inch radius corner profile, 2-flute construction, and a depth-adjustable decorative bead, giving installers and woodworkers a controlled way to produce smooth, uniformly rounded edges. Selecting this Bosch 85297M router bit from Wurth Baer Supply aligns the bit dimensions and profile style with edge work that calls for consistent rounding and a clean, repeatable decorative detail across multiple parts.
Sold In: 1 Each
