Hickory Hardware Eclipse Lancaster Brass 1-1/4" (32 mm) Diameter Knob, P413-LP

Hickory Hardware Eclipse Knob For Cabinets

Hickory Hardware Eclipse knob from Belwith Keeler is a 1-1/4 inch diameter cabinet knob in the Eclipse collection, so it gives doors and drawers a consistent, defined look across a run of cabinetry where a matching style matters. The knob is made from zinc die cast, which provides a solid, uniform body that handles frequent daily use in kitchens, baths, and shop-built furniture. Its Lancaster brass finish delivers a warm metal tone that works well where a traditional brass color is specified for a coordinated hardware schedule. The 1-1/4 inch diameter face offers enough surface area for a comfortable grip, which makes opening heavier cabinet doors feel controlled. A projection of 7/8 inch sets the hand away from the door or drawer front, helping reduce knuckle contact with the surface. The 3/8 inch base diameter keeps the footprint tight, which is useful when working on narrow rails or existing bore locations.

Key Lancaster Brass Knob Details That Matter

• The knob diameter of 1-1/4 inch and matching 1-1/4 inch width create a balanced round profile, which helps layouts stay even when aligned across multiple doors or drawers on a cabinet wall.
• The 7/8 inch projection establishes a consistent stand-off from the cabinet face, providing predictable finger clearance that simplifies setting reveals and checking clearances around adjacent components.
• The 3/8 inch base diameter keeps the contact point compact, allowing installers to position the knob on narrow stiles or slim drawer fronts without crowding edge profiles or decorative routs.
• The zinc die cast material gives the knob a single-piece metal construction that feels solid in hand, supporting repeat pulls in busy areas like kitchen cooking zones and frequently used storage cabinets.
• The Lancaster brass finish offers a defined brass tone that ties in with matching hinges or decorative hardware, helping maintain a unified appearance across an entire job.
• The specified screw size of 8-32 x 1 inch matches common cabinet drilling practices, which streamlines installation on standard door and drawer thicknesses in shop-built and manufactured cabinets.

Cabinet Knob Sizing And Mounting Details

This Belwith Keeler Eclipse cabinet knob uses a 1-1/4 inch diameter head and 1-1/4 inch overall width, so it aligns well with typical residential cabinet door and drawer proportions. The 7/8 inch projection places the gripping point at a practical distance from the face frame or panel, which helps when hands are wet or gloved. With a 3/8 inch base diameter, the mounting footprint stays focused around the fastener location, which is helpful when fitting onto narrow rails or working near panel profiles. The knob is designed to fasten using an 8-32 x 1 inch screw size, giving installers a familiar thread and length for through-bored cabinet fronts on many standard box constructions.

Using This Eclipse Knob In Real Projects

Where This Lancaster Brass Knob Fits Best

This Hickory Hardware Eclipse knob in Lancaster brass works well on cabinet doors and drawers where a round 1-1/4 inch pull is appropriate to the scale of the fronts. The 1-1/4 inch diameter and matching width give it enough presence for full-height doors while still looking proportional on smaller drawer faces. Its zinc die cast construction supports use in high-touch areas such as kitchen base cabinets, wall cabinets, and vanity units that see repeated daily operation. The Lancaster brass finish suits projects calling for a brass tone across decorative hardware, so it coordinates with other brass-colored components in the same space. Because the base diameter is only 3/8 inch, it fits visually on narrow stiles and slim rails, which is useful when working with detailed profiles or inset fronts.

Details That Support Repeatable Cabinet Results

The consistent 7/8 inch projection on this P413-LP cabinet knob helps installers deliver uniform hand clearance from door and drawer faces across an entire run, which contributes to a tidy finished line when viewed from the side. Using a standard 8-32 x 1 inch screw size means hole preparation aligns with common cabinet shop practices, supporting predictable fit through typical front thicknesses. The round zinc die cast body gives a stable feel when tightened against the surface, which helps the knob stay square to the face, maintaining alignment with neighboring hardware. The 1-1/4 inch diameter face provides a clear reference point for layout jigs and story sticks, so spacing from door edges and rails stays consistent from cabinet to cabinet. Combined with the defined Lancaster brass finish, these details let installers repeat the same look across multiple rooms or units on a project.

Common Questions About The P413-LP Knob

Selecting This Knob For Your Next Cabinet Run

The Hickory Hardware Eclipse knob P413-LP brings a 1-1/4 inch zinc die cast body, Lancaster brass finish, and 7/8 inch projection together in a practical round pull that suits many cabinet layouts. The 3/8 inch base diameter and 8-32 x 1 inch screw size support straightforward mounting on standard fronts. For projects calling for a consistent brass-tone knob across doors and drawers, this Belwith Keeler Eclipse option provides defined dimensions and finish details that help keep your hardware plan aligned from cabinet to cabinet.