Locking Glass Shelf Support with 5mm Peg, Chrome

Locking Glass Shelf Support With 5mm Peg For Glass

Locking Glass Shelf Support with 5mm Peg is a metal support that locks glass firmly into place via a rubber tipped nylon screw, so the shelf stays seated during normal use and light adjustment. The support accommodates glass shelf thickness of 3/16 to 1/4 inch, giving cabinetmakers and closet installers a defined range that simplifies drilling layouts and glass ordering. The support holding shelf area is 3/4 inch square, so the glass sits on a stable metal platform rather than a point contact. The product is described as a glass shelf rest in chrome, so it ties in visually where chrome hardware is already specified on the job. The metal construction provides a rigid base for the glass while the nylon screw handles the contact surface, which helps manage clamping pressure against the glass edge.

Key Shelf Support Details For Glass Projects

• The support uses a 5mm peg, so it fits standard 5mm shelf pin holes commonly drilled in cabinetry, which streamlines hole boring and simplifies planning across multiple shelf locations.
• The metal support holds the shelf while the rubber tipped nylon screw locks the glass, so the glass is both supported from below and clamped from the side, which helps reduce shelf shift in everyday use.
• The support accommodates 3/16 to 1/4 inch thick glass, giving a defined working range that helps align glass specification with the hardware, avoiding trial-and-error with different thicknesses.
• The support holding shelf area is 3/4 inch square, providing a broader bearing surface than a small pin, which spreads the load where the glass meets the hardware.
• The same part can also be used as a pivot hinge with a 3/8 inch diameter plastic bushing, so the hardware can play a second role in light pivot applications that follow the stated interface.

Chrome Glass Shelf Rest Mounting And Fit Details

This glass shelf rest uses a 5mm peg with a 3/16 inch bore, so it is intended for holes matched to that 5mm pin size in cabinet sides or gables. The pin is 5/16 inch long, which defines how deeply it seats in the drilled hole and helps installers judge engagement in typical shelf pin drilling patterns. The metal support area that holds the shelf is 3/4 inch square, so the installer has a clear visual reference for positioning the glass edge over the support. The locking action comes from the rubber tipped nylon screw, so once the glass thickness is within the 3/16 to 1/4 inch range, the screw can be tightened against the glass edge to secure it.

Using This Glass Shelf Support In Real Projects

Where This Locking Glass Shelf Support Works

This metal glass shelf support fits projects that use 3/16 to 1/4 inch thick glass shelving, because the support is specified to accommodate that thickness range. The 5mm peg design fits systems that rely on 5mm shelf pin holes, which are common in adjustable cabinetry and closets, so the same drilling pattern can carry both wood and glass shelves when desired. The chrome finish aligns with designs that already use chrome-toned hardware, tying shelf supports into the rest of the hardware set. The 3/4 inch square support surface gives the glass a clear landing area at each corner or support point, which is useful when setting out multiple supports under a longer glass shelf.

Details That Support Secure Locking And Pivot Use

The rubber tipped nylon screw that locks the glass firmly into place gives the installer a controlled way to clamp the glass against the metal body, which matters when working at the 3/16 to 1/4 inch thickness range where over-tightening can mark the edge. Combining a rigid metal body with a nylon screw tip means the structure carries the load while the screw manages contact with the glass. The ability to use the part as a pivot hinge with a 3/8 inch diameter plastic bushing adds a defined alternate use, so the same X301521K element can serve where a small pivot is required on a compatible bushing. The 3/16 inch bore of the pin and its 5/16 inch length define how the peg locates in the panel, which helps with consistent alignment across multiple supports in a cabinet run.

Common Questions About X301521K Glass Shelf Rest

Selecting This Chrome Support For Glass Shelves

The Locking Glass Shelf Support with 5mm Peg offers a defined fit for 3/16 to 1/4 inch glass, a 5mm peg suited to common cabinet drilling, and a 3/4 inch square metal bearing surface. The rubber tipped nylon screw locks the glass firmly into place, and the option to use the part as a pivot hinge with a 3/8 inch diameter plastic bushing adds flexibility. For projects calling for a chrome glass shelf rest that matches these dimensions and functions, this X301521K support aligns the hardware detail with the glass and drilling layout.