Wire Shelf Supports 1/8" Bore - Selby Furniture Hardware CNX520-6-1/4, 50/Pack

Wire Shelf Supports 1/8 Bore For Adjustable Shelves

Wire Shelf Supports 1/8 Bore are Selby Furniture Hardware CNX520-6-1/4 MAGIC wire shelf supports designed to hold wire shelves while keeping them adjustable and removable. These supports make shelves adjustable and removable, yet strong and firm, so a cabinet or closet layout can be reconfigured without changing the basic casework. Each support fits into 1/8 inch diameter holes drilled 1/2 inch deep in the side wall, creating a repeatable system that aligns with typical shop drilling operations. By drilling a series of these 1/8 inch diameter holes, you build a clean row of positions that define exact shelf heights. The combination of the MAGIC wire shelf support design and the 1/8 inch bore interface gives a compact, concealed support point that does the holding work while leaving the wire shelf open and accessible.

Key Details That Shape Shelf Performance

• The MAGIC wire shelf support design makes shelves adjustable and removable, yet strong and firm, so installers can relocate shelves without rebuilding or weakening the cabinet sides.
• The requirement to drill 1/8 inch diameter holes creates a precise locating system that controls shelf height and keeps each support centered and consistent along the run.
• A 1/2 inch deep bore in the side wall gives the support enough embedment to resist everyday loading while keeping drilling depth simple for standard shop equipment.
• Horizontally separated holes according to the wire selected and the shelf depth allow the same system to match different wire shelf formats while maintaining alignment.
• The Selby Furniture Hardware CNX520-6-1/4 designation ties this support to a specific, repeatable part number, simplifying reorders and matching across multiple projects.

Drilled Hole Layout And Support Installation

These Selby Furniture Hardware CNX520-6-1/4 MAGIC wire shelf supports rely on a straight series of drilled 1/8 inch diameter holes 1/2 inch deep in the side wall, so installation becomes a drilling and insert operation rather than a custom layout project. Because the supports sit in a drilled bore, the cabinet side wall carries the load, which helps maintain shelf strength while keeping the wire shelf itself clear. Horizontally separating the holes according to the wire selected and the shelf depth means the installer matches the bore pattern to the actual shelf geometry, preserving a snug fit along the wire runs. Once the bore pattern is established, the same drilling setup can be repeated from cabinet to cabinet, giving consistent shelf positions and reducing layout time.

Using MAGIC Wire Shelf Supports In Real Projects

Where These CNX520-6-1/4 Supports Are Applied

The MAGIC wire shelf support design targets projects that need shelves adjustable and removable, yet strong and firm, such as closets, storage cabinets, or other shelving that may be reconfigured. Because the system is based on 1/8 inch diameter holes 1/2 inch deep drilled into the side wall, it suits casework built from common panel materials where clean, small-diameter bores are practical. Horizontally separated holes matched to the wire selected and the shelf depth let the same cabinet carcass accept different wire shelf formats, so one case design can serve multiple storage layouts by changing the wire shelf pattern. The Selby Furniture Hardware CNX520-6-1/4 part identification gives fabricators a consistent reference when specifying or documenting these supports on project drawings and cut lists.

Why The Drilled Hole System Supports Repeatable Results

Requiring 1/8 inch diameter holes drilled 1/2 inch deep in the side wall turns the MAGIC wire shelf support into a predictable interface, where a drill setup or boring pattern defines every shelf position before hardware is installed. This approach reduces on-site judgment calls, because the horizontal separation of the holes is dictated by the wire selected and the shelf depth, linking the geometry of the shelf directly to the bore layout. When those holes are drilled in a consistent series, each support locates at the same elevation and setback, helping the wire shelf sit level and firm across the span. The ability to keep shelves adjustable and removable, yet strong and firm, means the same installed pattern can serve initial use and later reconfiguration without further machining to the cabinet. Over multiple jobs, the CNX520-6-1/4 specification allows a shop to standardize jigs and drilling programs around this 1/8 inch bore MAGIC system.

Common Questions About CNX520-6-1/4 Shelf Supports

Choose CNX520-6-1/4 Supports For Adjustable Wire Shelves

The Selby Furniture Hardware CNX520-6-1/4 MAGIC wire shelf support system uses a straightforward pattern of 1/8 inch diameter holes drilled 1/2 inch deep in the side wall to hold shelves adjustable and removable, yet strong and firm. By tying shelf positions to a drilled series of bores horizontally separated according to the wire selected and the shelf depth, these supports align the shelf with the cabinet geometry instead of relying on improvised layouts. For projects needing repeatable wire shelving positions under changing storage demands, this Wire Shelf Supports 1/8 Bore design offers a defined, part-numbered solution that fits cleanly into shop drilling workflows.