
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
EPCO GP Series glass door pull gives a straightforward way to add a grasp point on glass or sliding doors using a clip-on, stick-on design, so you gain controlled door movement without drilling through the glass panel. The pull is described as a GLASS DOOR PULL, CLIP-ON and as a Sliding Door Pull, which defines it as a fit for glass and sliding door applications where a low-profile grip is needed. Its 2-3/4 inch (70 mm) length concentrates the hand contact area, which helps users reliably open and close doors in tight cabinetry or display layouts. A 1 inch projection sets the grip away from the door face just enough for fingers to wrap around, supporting comfortable operation while keeping the pull close to the door plane in narrow clearances. The satin brass anodized finish presents a consistent brass tone, which helps the pull visually match satin brass programs across decorative hardware installations.
The GLASS DOOR PULL, CLIP-ON designation identifies this pull as a clip-on style for glass, which matters when selecting hardware for doors that do not have through-holes. Being defined as a Sliding Door Pull in the web description ties it directly to sliding door installations, guiding its use to track-driven or bypass door systems where a low-profile grip is preferred. The 2-3/4 inch length gives installers a known footprint along the door edge, helping with layout when multiple pulls are used on aligned glass or sliding panels. A 1 inch projection provides a predictable stand-off from the door surface, which helps plan clearances to adjacent doors, frames, or casework. The satin brass anodized finish on aluminum allows this pull to sit alongside other satin brass hardware in the same run, supporting a uniform look across doors and surrounding decorative components.
This EPCO GP Series 2-3/4 inch length pull is specified as a GLASS DOOR PULL, CLIP-ON, positioning it for applications where the door material is glass and traditional through-bolt mounting is not applied. The web description also defines it as a Sliding Door Pull, which aligns it with track or bypass doors in cabinetry, displays, or room dividers that rely on a surface grip to move the panel. Its compact 2-3/4 inch size suits narrower stiles or slim glass doors often found in upper cabinets or showcase fronts, so the pull does its job without crowding the panel. A 1 inch projection offers finger access on a moving panel while helping the door stay close to adjoining components in multi-door installations. The satin brass anodized finish on aluminum supports use wherever a satin brass visual is part of the design scheme, such as coordinated handles and pulls in the same project.
The GP15-B manufacturer part number ties directly to this specific EPCO GP Series satin brass stick-on pull, helping installers call out the exact pull when matching existing hardware or planning repeat work. Its 2-3/4 inch (70 mm) length creates a defined gripping area, which is practical when users need a positive handhold on light sliding or glass doors without overloading the panel with a long handle. The 1 inch projection sets a consistent distance from the door face, which helps maintain even spacing when several pulls are aligned across a bank of doors. The aluminum construction keeps overall mass low on sliding or glass panels, which supports smooth door travel where added weight could affect movement. A satin brass anodized finish gives the pull a controlled brass appearance that coordinates with satin brass decorative hardware, so designers and installers can maintain a continuous finish story across handles, pulls, and related trim.
The GP15-B is described as a GLASS DOOR PULL, CLIP-ON and as a Sliding Door Pull, so it is designated for glass and sliding door applications that use a surface-mounted grip.
The EPCO GP Series GP15-B pull has a length of 2-3/4 inches (70 mm), giving a compact gripping section well-suited to smaller glass or sliding door panels.
This satin brass stick-on pull has a 1 inch projection, setting the grip slightly off the door surface for finger clearance while keeping the pull low-profile.
The GP15-B pull is made from aluminum with a satin brass anodized finish, combining a lightweight body with a satin brass visual appearance for coordinated decorative hardware.
The pull uses manufacturer part number GP15-B and is part of the EPCO GP Series, which helps clearly specify this exact satin brass clip-on glass door pull.
The 2-3/4 inch length keeps the pull compact on sliding doors, providing enough grip for moving the panel while leaving space on narrow stiles or slim glass.
The EPCO GP Series 2-3/4 inch length satin brass stick-on pull GP15-B offers a defined solution for glass and sliding doors that call for a clip-on style grip. Its GLASS DOOR PULL, CLIP-ON designation and Sliding Door Pull description outline its intended role in jobs where a compact handle is needed without through-boring the panel. With aluminum construction, 1 inch projection, and a satin brass anodized finish, it aligns appearance, size, and function for controlled door operation. Select this GP15-B part number when the project requires a satin brass EPCO glass door pull that meets these specific dimensional and application details.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | EPGP15BL Mfr# GP15-BL | EPCO GP 2-3/4" (70 mm) Length Satin Black Stick-On Pull, GP15-BL | ||||
Sold in: 1 Each | EPGP17B Mfr# GP17-B | EPCO GP 2-13/16" (71 mm) Length Brass Stick-On Pull, GP17-B | ||||
Sold in: 1 Each | EPGP17BLK Mfr# GP17-BL | EPCO GP 2-13/16" (71 mm) Length Black Stick-On Pull, GP17-BL | ||||
Sold in: 1 Each | EPGP17C Mfr# GP17-C | EPCO GP 2-13/16" (71 mm) Length Clear Stick-On Pull, GP17-C |