CompX National Pin Tumbler Deadbolt Lock, Surface Mount with 3/4" Cam Extension, Dull Chrome - C8179-107-26D

CompX National Pin Tumbler Deadbolt Lock For Drawers

CompX National pin tumbler deadbolt lock is a surface mount drawer lock that secures drawers with a deadbolt action, giving a positive lock point at the front of the drawer where installers often want straightforward control. The lock uses a pin tumbler cylinder, so the keyed operation provides a defined open-or-closed status that is easy to understand on site. A key is required to engage the lock, which prevents the deadbolt from being thrown without the proper key. The key is removable in both locked and unlocked positions, so users can remove the key after setting the drawer either way, which simplifies key handling during normal operation. The cylinder fits a 57/64 inch diameter hole, giving a clear drilling dimension when laying out drawer fronts. The dull chrome, also described as satin chrome, finish provides a neutral appearance that aligns with many commercial and shop environments.

Deadbolt Drawer Lock Details That Support Daily Use

• The surface mount design lets the deadbolt lock fasten to the drawer surface, allowing installers to position the lock body relative to the drawer edge for proper bolt engagement.
• The 3/4 inch cam extension projects the cam to a defined reach, helping the deadbolt connect cleanly with the corresponding strike location on the cabinet or frame.
• ANSI/BHMA Grade 2 A156.11 certification means the deadbolt lock meets a recognized performance standard, supporting use in applications where a tested hardware grade is required.
• Stock keying with KA (keyed alike) uses the same key number across locks in that group, which lets users operate multiple locks with a single key in coordinated installations.
• Stock keying with KD (keyed different) assigns various lock numbers so each lock works with its own key, which is useful where separate key control for individual drawers is desired.

Cabinet Deadbolt Lock Mounting And Cylinder Fit

This CompX National deadbolt lock is a surface mount design, so the body mounts directly on the drawer, allowing installers to locate it to suit the drawer construction. The cylinder requires a 57/64 inch diameter hole, giving a specific boring size that guides drilling setup for consistent alignment across multiple fronts. The 3/4 inch cam extension works with this mounting to reach the strike position, supporting reliable bolt engagement when the drawer is closed. The strike plate identified as C2009-14A is specified for use with this lock, aligning the bolt with a defined strike geometry. Together, the mounting style, cylinder hole dimension, and cam extension create a repeatable layout that suits shop production or field retrofit work.

Using This Satin Chrome Drawer Deadbolt In Projects

Where This C8179-107-26D Drawer Lock Fits Best

The C8179-107-26D designation identifies this unit as a drawer lock in the deadbolt locks class, which positions it for drawer applications that benefit from a positive bolt throw. As a surface mount deadbolt lock in dull chrome, it suits drawers where visible hardware should remain understated yet functional. The 57/64 inch cylinder hole requirement and 3/4 inch cam extension make it suitable for drawer fronts with enough material to support that bore and cam reach. The ANSI/BHMA Grade 2 A156.11 certification aligns this lock with installations that value a tested commercial hardware grade. KA and KD keying options in stock keying allow this same lock type to be used in different control schemes across a project, one for shared access and one for separate access.

Details That Help Achieve Consistent Deadbolt Results

The pin tumbler construction of this CompX National deadbolt lock provides a familiar cylinder format, which helps maintenance staff and users work with standard keying conventions. Key operation is required to engage the lock, so the act of locking the drawer becomes an intentional step rather than a simple push catch, which can matter in controlled storage situations. Because the key is removable in both locked and unlocked positions, users can remove keys after locking or keep drawers unlocked while still removing the key, which supports different operating routines within the same hardware. The specified strike plate C2009-14A works with the 3/4 inch cam extension, giving a matched interface that supports consistent bolt seating into the strike. The satin, or dull chrome, description ties the finish to a low-glare appearance that blends into many cabinetry styles, providing a practical visual match for both commercial and shop-built casework.

Keyed Drawer Deadbolt Lock Questions From Installers

Select This Satin Chrome Drawer Lock For Your Next Build

The CompX National pin tumbler deadbolt lock C8179-107-26D combines a surface mount body, 57/64 inch cylinder bore, and 3/4 inch cam extension to create a defined drawer locking layout. ANSI/BHMA Grade 2 A156.11 certification supports projects that value tested hardware performance. KA and KD stock keying choices align the same lock with shared or individual drawer control. The satin, or dull chrome, finish suits many cabinet styles. For drawer work calling for keyed deadbolt security and clear drilling dimensions, this drawer deadbolt lock offers a straightforward, trade-ready option.