CompX National Pin Tumbler Deadbolt Lock, Surface Mount with 3/4" Cam Extension, Dull Chrome - C8179-915-26D

CompX National Deadbolt Lock For Secure Drawers

CompX National pin tumbler deadbolt lock is a surface mount lock designed for jobs that need a positive deadbolt action on drawers or similar applications. The lock uses a pin tumbler cylinder, which provides a defined keying system for controlled access on woodworking or casework projects. It requires a 57/64 inch diameter hole for the cylinder, so layouts can be drilled accurately before installation. The dull chrome, also described as satin chrome, finish gives a neutral metallic look that coordinates with many commercial and shop environments. The cylinder works with a key that is required to engage the lock, so the bolt is only thrown when keyed operation is used. The key is removable in both locked and unlocked positions, which allows keys to be taken away after locking or kept separate from the lock during shop handling.

Keyed Deadbolt Details That Support Daily Use

• The surface mount design lets the deadbolt lock fasten directly to the drawer or case surface, which helps on retrofit work or when face access is limited and simplifies layout on existing cabinetry.
• The 57/64 inch diameter cylinder hole requirement gives a clear drilling dimension, which supports repeatable boring on drill presses or CNC setups across multiple drawer fronts or panels.
• The pin tumbler construction defines the lock as a keyed cylinder system, which supports structured key control on projects where different users or locations need specific keying plans.
• The key is required to engage the lock and is removable in locked and unlocked positions, which allows installers or facility staff to remove keys during operation or handing over secured drawers.
• All units are ANSI BHMA certified Grade 2 A156.11, which identifies the lock to a recognized performance standard that specifiers can reference on commercial or institutional woodworking jobs.

Surface Mount Drawer Lock Fit And Preparation

This deadbolt lock is built as a surface mount unit, so it centers around face-mounted installation rather than a full mortise body. The 57/64 inch diameter hole requirement for the cylinder provides the core layout dimension, allowing installers to match boring bits and jigs to that size. Because the key is removable in both locked and unlocked positions, it can be taken out after function checks without leaving it in the cylinder while fitting the surrounding drawer or face trim. The ANSI/BHMA Grade 2 A156.11 certification identifies performance expectations, which can be matched to project documents that call out graded hardware. The satin or dull chrome finish supports use on cabinets where a subdued metallic appearance fits the overall hardware scheme.

Using This Deadbolt Lock In Cabinet Projects

Where This Surface Mount Lock Is Applied

This product is a CompX National pin tumbler deadbolt lock in the deadbolt locks class, so it is suited to applications that call for a locking bolt action rather than a simple latch. As a surface mount design, it fits projects where the lock body is mounted on the surface of a drawer or similar component, which can be practical on shop-built casework that uses standard panel construction. The requirement for a 57/64 inch diameter cylinder hole means it integrates into drawer fronts or panels that can accept that bore size, allowing it to be used with common woodworking drilling equipment. The dull, satin chrome finish allows the lock to sit visually with other satin chrome cabinet hardware in commercial, institutional, or shop environments where consistent finish across components is part of the specification.

Details That Support Keying Plans And Workflow

The lock uses a pin tumbler cylinder and is identified by manufacturer part C8179-915-26D, which helps specifiers and installers match this exact model across drawings, bids, and field work. Stock keying is defined as KA, meaning all keyed alike to a key number specified, or KD, meaning all keyed different with various lock numbers; in both cases, the master key will not work on these locks, which supports controlled access where master key systems are not desired. Other key changes are available from National Lock via special order, giving projects options for tailored keying schemes beyond standard KA or KD setups. The fact that the key is removable in locked and unlocked positions lets facilities handle keys according to their routines, such as removing keys from unlocked drawers when access needs to remain open but keys are stored separately. Under the ANSI/BHMA Grade 2 A156.11 certification, the lock aligns with a recognized category of performance, which supports repeatable selection when matching other Grade 2 hardware on a job.

Buyer Questions About This Satin Chrome Drawer Lock

Selecting This Deadbolt Lock For Your Project

The CompX National pin tumbler deadbolt lock, model C8179-915-26D, pairs a surface mount body with a 57/64 inch cylinder bore requirement, which suits many drawer and casework layouts. With ANSI BHMA Grade 2 A156.11 certification and defined KA or KD keying options where master keys do not operate the locks, it fits projects that need structured key control. The dull or satin chrome finish aligns this lock with satin chrome hardware schemes. For installations calling for a surface mount deadbolt drawer lock in this specification range, this model offers a clearly defined set of dimensions, keying choices, and performance classification to match cabinet and woodworking plans.