Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the right-hand adjustable rear mounting socket for epoxy-coated Euro drawer slides, designed to support the back end of a slide inside a face-frame cabinet where the side panel sits set back from the frame. It is built specifically to work with KV 1282 and KV 1294 series epoxy slides and keeps the rear of the slide aligned and stable so the drawer runs true through its full travel.
Face-frame cabinets do not give Euro slides a flat side panel to fasten to at the back of the cabinet the way frameless construction does. Without rear support, the back end of the slide can flex, rack, or shift under load, causing the drawer to run unevenly or bind. This socket solves that by anchoring the slide's tail end to the cabinet back or rear rail. It is the right-hand member of the pair, so it mounts on the right side of the opening as you face the cabinet. Install one on each side to give the slide set a complete rear foundation.
The socket is molded from plastic at a compact 2-1/8 inch depth, 7/8 inch height, and 3/8 inch width — sized to tuck into the rear of the cabinet without interfering with the drawer box. Plastic construction keeps the socket light and non-marring against the slide's epoxy coating. Attachment is by screw-on mounting through the socket body, which pulls securely against the cabinet back with no adhesive or special fasteners required.
Cabinet shops and installers fitting KV 1282 or KV 1294 Euro slides into face-frame cabinetry are the primary buyers. This is a replacement and completion part — if a slide set was ordered without rear sockets and the drawers are running rough or the back of the slide is floating, this is the fix. It also belongs in any new face-frame Euro slide installation as standard practice. If you are building frameless cabinets, rear sockets are not required; the slide screws directly to the flat side panel.
You need one right-hand socket and one left-hand socket per drawer. This listing is for the right-hand member only — order both to complete the rear support for one slide pair.
This socket is matched to KV 1282 and KV 1294 series slides. Rear sockets are series-specific; do not assume it fits epoxy slides from other manufacturers or other KV series without confirming the fit.
The adjustment accommodates minor depth variation in face-frame construction so you can seat the slide squarely without shimming. It is not designed to bridge large depth mismatches between the slide length and the cabinet interior.
No. Frameless cabinets provide a flat side panel that the slide screws to directly along its full length. Rear sockets are a face-frame solution.
One small part, one reliable slide run — the right-hand rear socket keeps the back end of the KV Euro slide anchored where face-frame construction cannot do it on its own.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  PL647L Mfr# 647L-32 | Bainbridge Rear Mounting Socket, Left Hand, 647L-32 |