Dynabrade replacement pad 56106 is a 5 inch medium no hole pad designed as a replacement pad for sanders that use pressure-sensitive adhesive abrasive discs, so you can restore a worn pad without changing your sanding process. The pad is identified as a non-vacuum PSA pad, meaning it works with PSA-backed discs rather than hook-and-loop, which suits shops already standardized on PSA abrasives. A 5/16-24 male thread is specified, so the pad threads directly onto matching sander spindles for a solid mechanical connection and predictable tracking during use. The pad is rated for a 13,000 RPM maximum operating speed, which supports use on air or electric sanders built to run at higher speeds while staying within the pad's stated limit. The product is sold as Each, so ordering aligns one-for-one with the number of pads needed on the shop floor.
This Dynabrade 5 inch pad uses a 5/16-24 male thread connection, which allows the pad to fasten directly into a sander shaft tapped with that thread size for a secure, centered mount. The non-vacuum PSA pad face works only with pressure-sensitive adhesive discs, so the disc bonds across the full face of the pad for stable contact while sanding. The 13,000 RPM maximum operating speed defines the top end of the pad's running range, so matching the pad with sanders designed to operate within that speed range supports controlled performance over time. The medium pad description characterizes the backing feel, giving a compromise between support and forgiveness that suits varied sanding tasks.
This Dynabrade replacement pad medium no hole 5 inch pad fits into sanding workflows that already rely on 5 inch PSA discs and non-vacuum tools, so you keep the same abrasive format when changing a worn backing pad. The 5/16-24 male thread lets the pad mount on sanders tapped for that thread, which is useful where multiple tools share the same spindle standard across a bench or production line. Because the pad is categorized under Sanders and Accessories, it serves as a component within a larger sanding setup rather than a standalone tool, aligning with shops that maintain and rebuild their sanders instead of replacing whole units. The medium description points to a pad that supports general sanding duties across woodworking tools and equipment applications where neither an extra-soft nor extra-hard backing is desired.
The non-vacuum PSA pad face keeps the surface uninterrupted by dust holes, giving full-face contact for PSA discs in operations where external dust collection is handled away from the pad. This continuous surface can help maintain even disc support across the 5 inch diameter during longer passes. The 13,000 RPM maximum operating speed gives a clear ceiling for tool speed selection, which supports consistent pad behavior when matching sander output to this rating. Identifying the pad by manufacturer part 56106 simplifies reordering the exact same Dynabrade replacement pad, helping shops maintain standardization across multiple sanders. Being in the Sanders and Accessories product class reinforces its role as a service and maintenance component, helping extend the working life of compatible sanders already in use.
The pad is described as a 5 inch pad, so it mates with 5 inch PSA abrasive discs for full-face coverage during sanding.
The pad uses a 5/16-24 male thread, so it mounts by threading into a sander spindle that has a matching female 5/16-24 thread.
The Web Description identifies it as a non-vacuum PSA pad, so it is designed for pressure-sensitive adhesive-backed sanding discs.
The pad has a 13,000 RPM maximum operating speed, setting the top rotational speed it is specified to handle in use.
The description calls it a medium no hole pad, indicating a medium backing feel with no through-holes for vacuum extraction.
The SAP description notes Packing & Sold In: Each, so every unit purchased corresponds to one individual 5 inch pad.
The Dynabrade replacement pad 56106 offers a 5 inch medium no hole non-vacuum PSA surface with a 5/16-24 male thread and a 13,000 RPM maximum operating speed, giving clear parameters for pairing it with existing sanders. When your current setup uses 5 inch PSA discs on non-vacuum tools with a matching thread, this pad aligns with that configuration so you can keep the same abrasives and general sanding feel. Sold as Each, it is straightforward to match the quantity ordered to the number of sanders you plan to keep in service.
Sold In: 1 Each
