Dynabrade replacement pad medium gives a 6 inch sanding face in a no-hole configuration, so the pad matches non-vacuum setups where dust extraction through the pad is not used and the abrasive surface stays continuous for coverage. This pad is identified as medium, which supports balanced sanding performance between cut and control when working with compatible sanders. The pad is a 6 inch pad, so it matches sanders and abrasives designed around that common diameter for consistent contact on the work surface. The design is described as non-vacuum PSA, so it is used with pressure sensitive adhesive backed abrasives rather than hook-and-loop attachment. That PSA style keeps the abrasive bonded across the pad face, which matters when a firm, even grip on the disc is preferred during sanding.
The web description notes a 5/16"-24 male thread on this Dynabrade 6 inch pad, so the pad mounts to tools that accept that threaded stud, giving a direct threaded connection between pad and sander. That male thread arrangement places the stud on the pad itself, which then engages the tool shaft to secure the pad for sanding tasks. The description also specifies a 13,000 RPM maximum operating speed, setting the upper speed range the pad is designed to handle during use. That rated maximum speed matters when pairing the pad with a sander so that tool speed settings can stay within the stated operating range while sanding. The manufacturer part number 56107 further identifies this pad configuration, which helps match the correct pad when replacing an existing Dynabrade pad with the same thread and size.
This Dynabrade replacement pad medium no hole 6 inch pad - non-vacuum PSA is used in sanding setups where a 6 inch disc and a non-vacuum configuration are required, so the pad suits tools that do not route air through the pad face. The 5/16"-24 male thread connects this pad directly to sanders built with that thread in the drive shaft, creating a secure attachment point for rotational sanding. Because the pad is medium, it supports workloads that call for a balance between conforming to minor surface variations and keeping a firm backing for flatter passes. The woodworker or installer can select 6 inch PSA abrasive discs that match this diameter, so the disc edge aligns with the pad edge to maintain even contact. In this role, the pad acts as the backing interface between the sander and the abrasive disc, transferring tool motion to the sanding surface.
The no-hole construction of this 6 inch pad keeps the face uninterrupted, so PSA discs adhere across a solid surface, which supports consistent pressure distribution during sanding passes. With a non-vacuum PSA configuration, the abrasive disc bonds through its adhesive layer rather than mechanical hooks, so once pressed down it resists shifting under normal sanding motion. The 13,000 RPM maximum operating speed rating gives a defined upper boundary for sander speed, which guides tool selection and settings so the pad is used within its rated capability. The 5/16"-24 male thread keeps the pad centered when installed on a matching tool shaft, promoting balanced rotation and helping sanding feel smoother when the tool runs within the stated speed range. Together, the medium backing, thread specification, and rated speed combine into a pad setup that supports repeatable sanding behavior in ongoing use.
The Dynabrade 56107 replacement pad is a 6 inch pad, so it works with sanders and abrasive discs sized around a 6 inch diameter sanding face.
The Dynabrade replacement pad medium uses a 5/16"-24 male thread, so it mounts to sanders that accept that threaded stud for direct attachment.
This 6 inch non-vacuum PSA pad uses pressure sensitive adhesive backed discs without dust holes, so the disc face stays continuous across the pad surface.
The Dynabrade 56107 pad has a 13,000 RPM maximum operating speed, so the sander should be run within that speed range during use.
The pad is described as medium, providing a middle backing feel that supports general sanding where neither very soft nor very hard support is needed.
The web description notes Packing & Sold In: Each, so this Dynabrade 6 inch replacement pad is supplied as individual units.
This Dynabrade replacement pad medium no hole 6 inch pad - non-vacuum PSA, identified as manufacturer part 56107, brings together a 6 inch diameter, 5/16"-24 male thread, and 13,000 RPM maximum operating speed for non-vacuum PSA sanding. For woodworkers and installers running compatible Dynabrade-style tools, these specifics define how the pad interfaces with the sander and the disc. Order this pad from Wurth Baer Supply when a medium 6 inch non-vacuum PSA backing pad with 5/16"-24 male thread and a 13,000 RPM rating matches the sanding setup.
Sold In: 1 Each
