Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Shelf support grommets 5 mm give your shelf pin holes a finished look by lining the bore with nickel plated steel, which matters when exposed cabinet interiors need a neat, professional appearance for customers or high-visibility projects. The Pro Value Series BA1283BN grommets are sized to accept both 5 mm and 1/4 inch bore shelf pins, so one part number serves common pin diameters across different cabinet runs. Each grommet is nickel plated steel, which provides a consistent metallic finish that visually upgrades raw drilled holes in shelf sides. By lining the hole, these grommets create a defined edge around the bore, which helps the shelf pin register against a stable metal surface during use. The BA1283BN designation ties this part directly to the Pro Value Series shelf supports category, supporting organized reorders and consistent hardware selection.
The 5 mm grommet requires a 7/32 inch (5.3 mm) diameter hole, so a standard bit can be used to drill clean bores that accept the grommet without over-sizing. The 1/4 inch grommet requires a 17/64 inch (6.7 mm) diameter hole, which gives a defined target for shelf side drilling when 1/4 inch shelf pins are specified. The 5 mm bore grommet depth of 3/16 inch sets how far the grommet seats into the panel, helping align drilling depth to keep the lip flush to the surface. The 1/4 inch bore grommet depth of 1/4 inch establishes a deeper seat, which influences how the grommet sits in thicker panels and how the shelf pin engages inside the lined bore.
The BA1283BN Pro Value Series shelf support grommets sit in the shelf side bore to accept either 5 mm or 1/4 inch shelf pins, so they function directly at the pin interface in adjustable shelving layouts. Grommets line the hole to provide a finished appearance, which is valuable anywhere shelf pin holes remain visible inside cabinets, closets, or storage runs. By using nickel plated steel around the bore, these grommets visually upgrade standard drilled holes, aligning the look with other nickel hardware within the same installation. The 5 mm and 1/4 inch bore sizing allows these parts to serve in both metric and fractional layouts that are already dimensioned around those common pin diameters. Because they are classified under shelf supports, they integrate into projects wherever adjustable shelves are supported by pins seated in bored panels.
The specified 7/32 inch (5.3 mm) hole for the 5 mm grommet keeps the bore closely matched to the grommet body, which helps the grommet sit firmly and present an even rim around the opening. The 17/64 inch (6.7 mm) hole requirement for the 1/4 inch grommet sets a slightly larger drilling target, giving enough room for the grommet body while still supporting a snug, centered fit in the panel. The 5 mm bore grommet depth of 3/16 inch defines how far into the panel the metal lining extends, which affects how the shelf pin bears against the metal when loaded. The 1/4 inch bore grommet depth of 1/4 inch extends the lined section further, influencing how much of the pin shank is guided by the metal wall of the grommet during use. Together, these hole sizes and depths help standardize drilling and seating, supporting repeatable alignment across multiple shelf positions.
The BA1283BN grommets are sized to accept 5 mm and 1/4 inch bore shelf pins, so they work in layouts using either of those pin diameters for adjustable shelving.
The grommets are nickel plated steel, giving the shelf pin bore a metal lining with a nickel finish that coordinates with other nickel hardware and upgrades the look of drilled holes.
The 5 mm bore grommet requires a 7/32 inch, or 5.3 mm, diameter hole, so drilling to that size lets the grommet seat properly and present a clean finished rim.
The 1/4 inch bore grommet requires a 17/64 inch, or 6.7 mm, diameter hole, creating the clearance needed for the grommet body while supporting a controlled fit in the panel.
The 5 mm bore grommet depth is 3/16 inch, while the 1/4 inch bore grommet depth is 1/4 inch, so bore depth can be planned around those dimensions.
These shelf support grommets line the pin hole so 5 mm or 1/4 inch shelf pins bear against nickel plated steel, providing a finished appearance at every adjustable shelf position.
The Pro Value Series BA1283BN shelf support grommets use nickel plated steel to line 5 mm and 1/4 inch bore shelf pin holes, turning plain bores into clean, finished openings. With defined hole diameters of 7/32 inch for 5 mm and 17/64 inch for 1/4 inch, drilling setups can be built directly around the specified sizes. The 3/16 inch and 1/4 inch bore depths for the two versions give clear seating depths, supporting consistent fits across panels. For projects where adjustable shelves rely on 5 mm or 1/4 inch shelf pins, these grommets provide a precise metal interface at each support point.
Sold In: 1000 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 100 Each |  IF1325NP-C Mfr# IF1325NP | Shelf Support Grommets 5 mm & 1/4" Grommets - Pro Value Series IF1325NP | ||||
Sold in: 1000 Each |  IF1325NP Mfr# BA1284BN | Shelf Support Grommets 5 mm & 1/4" Grommets - Pro Value Series BA1284BN |