Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the right-hand cabinet member of the Grass 6600 series epoxy-coated Euro slide — a 17-3/4 inch (450mm nominal), steel roller slide component in white, sold as a single handed piece for the cabinet side of the installation. Order it when your production flow buys members by hand rather than as complete sets, or when you need to replace a damaged cabinet-side profile without sourcing a full set.
Cabinet shops running white-interior kitchens, vanities, and closets reach for the Grass 6600 white member program because the epoxy finish disappears against the cabinet box rather than drawing the eye. The white finish matters most in open-face or glass-door cabinets and in frameless casework where the slide is visible when the door is open. This right-hand member also fits repair and refacing work — when the cabinet-side profile on a single drawer is damaged, you replace just this piece instead of pulling a full set off the shelf. The 6600 series is a side-mount slide; in face-frame cabinets, plan for the rear socket or mounting bracket the installation requires at the back of the cabinet.
The member is steel with a white epoxy powder-coat finish — the same baked-on color process used across the Grass 6600 series. Epoxy holds up to the contact and humidity of an active kitchen drawer cycle better than a spray finish, and the white color is matched across the series so a replacement member ordered today aligns visually with existing Grass 6600 hardware in the same cabinet run. This is an indoor slide; epoxy-coated steel is not rated for exterior or high-moisture environments.
One drawer takes four members total: a left-hand and right-hand cabinet member (one per cabinet side) and a left-hand and right-hand drawer member (one per drawer side). This listing is the right-hand cabinet member only. Add the left-hand cabinet member and both drawer members from the same Grass 6600 series to complete one drawer. Members from other series — including the Grass 6610 — are not interchangeable with 6600 components, and members from other brands do not pair with Grass sockets or rear hardware.
The product attribute lists Motion Technology as Standard, meaning no self-close ramp or soft-close damper is claimed for this member in the data. Note that the Grass 6600 series as a whole is described in the Grass catalog as self-closing with 86mm of self-closing action; if the closing behavior of the complete assembled slide matters for your application, verify against the Grass 6600 catalog for the specific members you are combining.
The Grass 6600 series can be installed in face-frame cabinets, but face-frame installations require a rear mounting socket at the back of the cabinet to support the slide. Those sockets are series-specific and sold separately; confirm you have the correct 6600-series rear hardware before ordering.
Mechanically the members will function together if they are from the same 6600 series, but the finish colors will differ visibly inside the cabinet. For a consistent interior appearance, match all four members to the same color across both sides of the drawer.
The Grass 6600 series suits drawer material from 1/2 inch (12.7mm) to 3/4 inch (19mm) thick, per the Grass catalog. Build the drawer box width to inside cabinet width minus 1 inch to provide 1/2 inch clearance on each side.
The white Grass 6600 right-hand cabinet member lets production shops and repair techs source exactly the piece they need — no pulling a full set when a single profile is all the job calls for. Match the length, match the hand, match the color, and the drawer runs as the series was designed.
Sold In: 100 Each
