Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the left-hand cabinet member of Grass America's 6600 series epoxy-coated Euro slide, in white — a 21-5/8 inch (550mm nominal), 3/4-extension, side-mount roller slide component for traditional and production cabinetry. One drawer requires both a left-hand and a right-hand cabinet member plus two matching drawer members; this listing covers the left-hand cabinet member only.
The 6600 series is Grass America's side-mount roller slide line for traditional cabinetry — kitchen drawers, bathroom vanities, and closet builds where a white cabinet interior calls for hardware that disappears. The 21-5/8 inch (550mm nominal) length suits mid-depth cabinet boxes, and the 6600's side-mount design mounts directly to the cabinet interior with 1/2 inch of clearance per side. Shops running white interiors throughout a job site will find the member-level buying format lets them match purchase quantity to drawer count without leftover inventory.
The Motion Technology attribute for this member reads "Standard." However, the Grass catalog describes the 6600 series as a self-closing slide, with 86mm of self-closing action built into the rear of the slide. That self-closing ramp is a positive, undamped close — the drawer pulls itself home once pushed within range, without any damping. This is self-close, not soft-close; if you need a slowed, silent landing, that is a separate feature this series does not include. The white epoxy powder-coat finish is a baked-on coating over steel, chosen to color-match white cabinet interiors rather than stand out as exposed hardware.
Cabinet shops running white-interior production work are the primary buyer here. The member-level format means a shop can stock left-hand and right-hand cabinet members alongside the matching drawer members and pull exactly what each job needs — no complete-set waste when a single member needs replacing mid-run. Contractors refacing existing cabinetry with white interiors will also find the 6600 series a reliable match for period and transitional casework where roller-slide aesthetics fit the build.
No. One drawer in the 6600 series requires a left-hand cabinet member, a right-hand cabinet member, and two drawer members (one per side). This listing covers the left-hand cabinet member only. Order the matching right-hand cabinet member and both drawer members separately from the same 6600 series to complete a working pair.
No. The 6600 and 6610 are separate Grass series with series-specific members and rear sockets. Pair 6600 cabinet members only with 6600 drawer members and 6600 rear sockets.
The Grass 6600 series accommodates drawer material from 1/2 inch (12.7mm) to 3/4 inch (19mm) thick. Build the drawer box 1 inch narrower than the inside cabinet opening to leave 1/2 inch of clearance on each side.
Self-closing. The 6600 series uses a built-in ramp that pulls the drawer fully shut over the last 86mm of travel. There is no damper, so the close is positive rather than slowed. Soft-close is a different feature not present on this series.
Yes, but face-frame installations require series-specific rear mounting sockets to support the back end of the slide, sold separately. In a frameless cabinet the slide mounts directly to the flat interior panel.
Ordering by the member means no wasted sets when one piece is all you need — just the right-hand left-hand white cabinet member, sized for your cabinet depth, ready to drop into the run.
Sold In: 100 Each
