Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the right-hand drawer member from Grass America's 6600 series epoxy-coated Euro slide program, in white, for side-mount roller slide installations. Sold as a single handed component, it screws to the bottom edge of the right side of the drawer box and rides inside the matching 6600 series right-hand cabinet member.
The 6600 drawer member is the component that travels with the drawer box. It attaches along the bottom edge of the drawer side and engages with the cabinet member already screwed to the interior of the cabinet. In a white cabinet box — melamine-wrapped plywood, painted MDF, or a prefinished panel — the white epoxy finish on this member keeps the hardware from contrasting against the liner, which matters in furniture-grade work and any install where the drawer interior is visible when open.
This member suits production shops and installers who order Grass 6600 components by hand rather than buying complete sets, whether to replace a single damaged piece, to true up an order, or to build a specific configuration from member inventory. It pairs only with Grass 6600 series cabinet members and sockets — 6610 members and components from other brands are not interchangeable.
The Motion Technology attribute for this SKU reads "Standard," but the Grass 6600 series is a self-closing slide by design: the built-in rear ramp delivers 86mm of self-closing action, pulling the drawer home once it enters the capture zone. That is a positive, undamped close — the drawer moves with intention, not with the slowed, cushioned landing of a soft-close damper. For installations where that distinction matters, this is a self-close product, not a soft-close one. If a damped close is required, a different slide family is the right choice.
Cabinet shops running the Grass 6600 program often stock members separately rather than pulling complete sets for every drawer. That approach lets a shop maintain a tighter inventory, replace a single mishandled piece without opening a new set, and mix lengths across a batch without overage. Designers and contractors specifying or replacing 6600 hardware in an existing white-cabinet install also reach for handed members when one side of a drawer needs service. This right-hand drawer member covers all of those scenarios, in the 16-1/2 inch length suited to standard kitchen and bath drawer depths.
One complete drawer requires a right-hand cabinet member, a left-hand cabinet member, a right-hand drawer member, and a left-hand drawer member — all from the Grass 6600 series. This listing is the right-hand drawer member only. Order each of the other three components separately.
No. The 6600 and 6610 are separate series with series-specific components. Use 6600 drawer members only with 6600 cabinet members and 6600 rear sockets.
The Grass 6600 requires 1/2 inch of side clearance per side. Build the drawer box 1 inch narrower than the inside cabinet opening — Grass states the formula as: drawer width equals inside cabinet width minus 25.4mm (1 inch).
No. The 6600 series is self-closing: a mechanical ramp pulls the drawer shut over the last 86mm of travel. There is no damper. The close is positive and quick, not slowed and silent. Soft-close is a different mechanism and a different product.
The Grass 6600 series is designed for drawer material from 12.7mm (1/2 inch) to 19mm (3/4 inch) thick, covering the full range of standard drawer box construction.
Add the right-hand drawer member to your cart and pair it with the three remaining 6600 series components to complete the drawer — the white finish keeps the hardware low-profile inside the box, and the self-closing ramp delivers a clean, reliable close on every cycle.
Sold In: 100 Each
