Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the left-hand drawer member of the Grass 6600 series Euro roller slide — a 21-5/8 inch (550mm nominal), white epoxy-coated steel component sold individually. It attaches to the bottom edge of the drawer side and rides inside the matching cabinet member to complete the 6600's roller-bearing travel system.
One drawer requires four components from the 6600 series: a left-hand cabinet member, a right-hand cabinet member, a left-hand drawer member, and a right-hand drawer member. This listing is the left-hand drawer member only. Order each piece separately to match your production count exactly, or to replace a single damaged component without buying hardware you do not need. All four parts must come from the Grass 6600 series — members from other series or other brands will not interchange with 6600 components.
The 6600 is Grass America's side-mount roller slide. The drawer member mounts at the bottom edge of the drawer side with 1/2 inch of side clearance per side, so build the drawer box 1 inch narrower than the inside cabinet opening. The series suits drawer material from 1/2 inch (12.7mm) up to 3/4 inch (19mm) thick.
The white epoxy powder-coat is a functional finish choice, not a decorative one. In a white melamine or painted interior, a white slide recedes — the hardware stops drawing the eye when the drawer is open. The 6600 series is also available in almond for cabinets with a warmer interior tone. Choose the color that matches your box material so the slide reads as part of the cabinet, not as a separate hardware element.
The epoxy coating over steel holds up to the friction and humidity typical of kitchen and bath environments. It is an indoor finish; this slide is intended for dry interior cabinetry.
This component suits production cabinet shops and installers who order members individually to match shop inventory, reduce overstock, or replace a single side of a damaged slide pair. It also fits homeowners and contractors doing targeted repairs on existing 6600 series installations — swapping out a worn or bent drawer member without pulling the cabinet members off the box.
The 75 lb load class and 3/4 extension put this slide in the standard kitchen, vanity, and closet drawer category. It is not the right choice for pantry pull-outs, file drawers, or any application where full rear access or heavy-duty capacity is required.
This is the left-hand drawer member only — one of four components needed to run a single drawer. You also need the left-hand cabinet member, the right-hand cabinet member, and the right-hand drawer member, all from the Grass 6600 series.
No. The cabinet member is a separate SKU. Mounting screws appropriate for the cabinet material are not included; use fasteners suited to your panel type.
The Grass 6600 series is designed for drawer sides from 1/2 inch (12.7mm) to 3/4 inch (19mm) thick.
The 6600 series includes a self-closing ramp on the cabinet member side of the assembly. The Motion Technology attribute for this SKU reads Standard, which in this context reflects the member-level listing rather than the series behavior. The assembled 6600 slide set self-closes over the last 86mm of travel.
No. The 6600 and 6610 are separate series with series-specific components. A 6600 drawer member pairs only with 6600 cabinet members.
Ordering at the member level means no leftover hardware and no second shipment chasing a missing hand. Match the white finish to your interior, confirm your cabinet depth against the 550mm nominal length, and add the exact count your run requires.
Sold In: 100 Each
