Lavi Bright Brass End Cap 1-1/2" D, 00-602/1H

Lavi Bright Brass End Cap 1-1/2 For Rail Ends

Lavi bright brass end cap 1-1/2 starts as a dedicated fitting for open rail ends on handrails and foot rails, capping those exposed tube ends so the rail terminates with a clean, finished half-ball shape. The part is identified as Lavi Industries manufacturer part 00-602/1H, giving installers a precise reference when matching it to existing layouts or ordering for repeat work. The end cap is listed for use on handrails and foot rails in bar and foot railing applications, so it fits naturally into front-of-house bar runs or similar railing lines where open ends need a solid termination. The bright brass finish is specified as being made of solid brass, so the visible surface and the underlying material are the same metal, which matters when cutting, polishing, or blending the cap with adjoining brass rail sections in the field.

Key Rail-Capping Details For Bar Installers

• The end cap is described as capping the open rail ends of handrails and foot rails, so it closes the tube visually and physically, reducing sharp exposed edges at terminations along the run.
• The bright brass finish is made of solid brass, which allows the cap to be polished or finished to match other brass rail components without transitioning to a different base metal at the end.
• The product is categorized under builders hardware for bar and foot railing and accessories, so it aligns with typical bar rail layouts and helps keep component selection within a single bar railing hardware family.
• The web description states that the satin stainless steel finish version is made of 304 stainless steel, showing that the product line supports stainless steel railing projects where installers need fittings built from 304 stainless.

Rail End Fit And Cap Alignment Details

The Lavi bright brass end cap 1-1/2 is identified at 1-1/2 diameter, tying directly to common 1-1/2 inch bar and handrail tubing sizes, so it is suited to capping those rail ends at runs and terminations. Because it is part of the bar and foot railing and accessories class, it is intended to mate with matching railing components in that system, which helps maintain alignment between the rail tube and the half-ball profile. The solid brass construction at the bright brass finish means the cap can be worked like other brass fittings when aligning shoulders or blending joints so the transition from tube to end cap appears consistent along the line.

Using This End Cap In Bar And Foot Rails

Where This Lavi End Cap Fits In Rail Runs

The Lavi 00-602/1H end cap is described as capping the open rail ends of handrails and foot rails, so it is intended for termination points at bar rails, foot rails, or similar guard rails where the tubing stops. In builders hardware terms it sits in the bar and foot railing and accessories category, which places it alongside elbows, brackets, and other fittings normally used in bar front projects and commercial railing lines. Its 1-1/2 diameter callout ties it to 1-1/2 inch rail tube, giving fabricators and installers a clear target when planning where the half-ball termination will sit at the end of a straight run or at the end of a return. Because the bright brass finish is made of solid brass, it visually complements other solid brass or brass-finished rail components, which keeps terminations from standing out as a different material at eye level or along the toe rail.

Details That Support Consistent Rail Terminations

The product name Lavi bright brass end cap 1-1/2 D, 00-602/1H, gives a consistent identifier that can be used whenever repeat terminations are required across multiple bar sections or replacement work, supporting standardized detailing across a project. The description that it caps the open rail ends of handrails and foot rails highlights its role in covering the raw cut ends of tubing, which can otherwise leave an abrupt edge at the end of the rail line. The bright brass finish, specified as solid brass, enables installers to polish, buff, or maintain the cap to the same standard as the rest of the brass run, supporting long-term visual consistency around the bar. The note that the satin stainless steel finish version is made of 304 stainless steel shows that the same form factor exists in a stainless steel material, helping designers maintain similar termination geometry whether they are working in brass or 304 stainless railing environments.

Common Questions About This Lavi Rail End Cap

Select This End Cap For Finished Rail Ends

The Lavi bright brass end cap 1-1/2 is defined for capping the open rail ends of handrails and foot rails, so it serves as the finishing detail at terminations in bar and foot railing projects. Its solid brass bright brass finish lets the end of the run match other brass fittings visually and in how it can be polished or finished on site. With a 1-1/2 diameter callout and manufacturer part 00-602/1H, this fitting gives installers and fabricators a clear, repeatable choice whenever a bar or foot rail needs a half-ball brass termination.