MDI polyethylene round leveling glides are standard duty cabinet and furniture levelers that stabilize work surfaces and tables by supporting each leg on a consistent, flat base. The floor base diameter is 1-1/8, which spreads the load over a defined footprint so the glide contacts the floor in a controlled area instead of concentrating pressure on a small point. These glides are described as economy leveling glides, so they help control hardware cost while still providing a defined leveling point at each leg. The design is non-swiveling from the stem, so the base stays aligned with the stem during use, which keeps the contact point predictable when setting height on cabinets or furniture. The round profile matches typical leg footprints in cabinet and furniture applications, which helps these glides sit squarely under straight leg ends.
These MDI Manufacturing cabinet and furniture levelers function as leg levellers and toe kick components within the work surface and tables category, so they fit naturally into cabinet bases and table legs where a height-adjustable foot is required. Because the glides do not swivel from the stem, the installer gains a predictable relationship between the leg and the floor contact, which simplifies fine-tuning of corner heights during cabinet runs or when bringing multiple table legs into plane. The 1-1/8 floor base diameter defines how much of the floor each leg rests on, helping installers visualize spacing and support under each corner or intermediate leg location.
This product falls under work surface and tables as well as cabinet and furniture levelers, so it is suited for cabinets, furniture legs, and table bases that need adjustable support. As part of the leg levellers and toe kicks product class, these MDI Manufacturing glides work in applications where a discrete leg or toe area must contact the floor while allowing small height corrections. The polyethylene round base interfaces directly with the floor, creating a defined contact zone under each support point. The floor base diameter of 1-1/8 sets a consistent footprint, which is useful when aligning multiple cabinets or tables in a row, because each glide engages the floor in a similar way. In installations using 1 square leg bases, the optional metal insert bushing is designed to fit those legs, creating a matched pair between leg cavity and bushing so the glide can be used in that specific leg geometry.
The web description specifies that these economy leveling glides are standard duty and the glides do not swivel from the stem, which defines how they behave during adjustment. Because the base does not swivel relative to the stem, the orientation of the foot stays constant while height is adjusted, giving a consistent relationship between rotation at the stem and movement at the floor. This predictable motion helps installers dial in cabinet and furniture alignment without the base drifting or rotating independently. The non-swivel design also supports repeated micro-adjustments on work surfaces and tables, since each turn of the stem reliably raises or lowers the same 1-1/8 diameter base. Together with the leg levellers and toe kicks classification, this behavior positions the product for projects where stable, repeatable leveling is important across multiple legs or toe points.
MDI polyethylene round leveling glides are cabinet and furniture levelers in the leg levellers and toe kicks product class, so they serve as adjustable feet for work surfaces, tables, and similar bases.
The non-swivel design keeps the glide base fixed to the stem, so turning the stem moves the same 1-1/8 inch contact point, helping installers achieve consistent, repeatable height changes.
The 1-1/8 inch floor base diameter defines the round footprint each glide places on the floor, helping distribute leg loads while providing a stable support area under cabinets or tables.
These economy leveling glides are listed under work surface and tables and cabinet and furniture levelers, so they are suited to cabinet bases, furniture legs, and table supports requiring standard duty leveling.
The optional metal insert bushing is designed to fit 1 inch square leg bases, providing a matched interface so the leveling glide can be integrated with that square leg dimension.
Standard duty indicates these glides are intended for typical cabinet, furniture, and work surface loading, aligning their performance with everyday installations rather than heavy industrial service.
These MDI Manufacturing polyethylene round leveling glides combine a 1-1/8 floor base diameter, non-swiveling stem connection, and standard duty rating to support typical cabinet, furniture, and table projects. As leg levellers and toe kicks within the work surface and tables category, they address leveling requirements at each support point while keeping the contact area and adjustment behavior clearly defined. The optional metal insert bushing, designed to fit 1 square leg bases, offers an additional way to align this glide with square leg designs when that bushing is used. For projects where economy leveling glides with predictable adjustment are appropriate, this part number 673-722-121(1000) from Wurth Baer Supply provides a focused option.
Sold In: 1 Each