
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Standard Duty Shelf Brackets Single Slotted define this Knape and Vogt 180 BR 16 part as a work-focused support for adjustable shelving runs. This bracket is part of the KV180 series, so it ties into a proven standard for wall-mounted shelf systems. The 16 inch length stated in the description gives you a clear shelf depth target, which helps lay out closets, garage storage, or shop racking with predictable overhang. Being described under Shelf Standards and Brackets positions it as a component in a standards-and-brackets layout, which is useful when mapping multiple shelf levels on the same wall. The brass finish described as Brass Look changes the visual presence of the bracket, which matters on open shelving where hardware is exposed. The Knape and Vogt brand reference signals a consistent model line, which simplifies matching additional brackets and standards across the same installation.
The note that KV180 is typically used with KV80 standards tells you this bracket is intended to engage that specific standard profile, which helps maintain consistent engagement along a full run. The reference to single slotted design defines how the bracket interfaces with the standard, which influences spacing decisions when laying out uprights on the wall. The mention of shelf lip at the end of the bracket signals an upturned edge on the outer end, which helps keep the shelf position consistent relative to the bracket under typical loading. The description of the bracket having 2 engagement teeth indicates a two-point connection into the standard, which supports a more secure engagement profile across repeated adjustments or reconfiguration.
The description placing this Knape and Vogt 180 BR 16 in Shelf, Closet and Garage Organization points it toward storage runs where adjustability matters over time. The note that KV180 is typically used with KV80 standards means this bracket is designed for standard-and-bracket uprights, which suits continuous vertical adjustment in closets or wall storage. The available lengths listed from 4 inch through 20 inch in the KV180 family show that this model sits in the longer range, so the 16 inch length works well when deeper shelving is required. The brass finish described as Brass Look provides a warmer appearance than neutral finishes, which is useful in residential or office shelving where hardware is part of the visible design. Being categorized as a Shelf Standards and Brackets component keeps this bracket aligned with other standards-based hardware, which matters when designing systems that may expand later.
The stated weight rating of 120-320 lb per pair, based on length, shows that this series is engineered around defined load ranges, which helps match shelf length and expected loading to the correct bracket size. The web description stating 16-gauge steel for 4-12 inch lengths and 14-gauge steel for 14-20 inch lengths means the longer sizes, including this 16 inch model, are made from thicker 14-gauge steel, which supports heavier loads across a longer projection. The bracket having 2 engagement teeth to fasten securely to the standard indicates a dual-point hookup, which supports repeated reconfiguration without sacrificing engagement quality. The shelf lip at the end of the bracket provides a defined bearing point at the front, which helps keep the shelf from shifting forward under everyday use. The Made in USA statement ties production to a defined manufacturing base, which supports consistent part-to-part dimensions when ordering additional units. The note that KV181 is a lipless version of KV180, available in different parameters, confirms that KV180 is the lipped style, which matters when a front edge stop is preferred in the installation.
The Knape and Vogt 180 BR 16 is a KV180 series shelf bracket used in shelf standards and brackets systems, providing adjustable support in shelf, closet, and garage organization layouts.
The KV180 model is typically used with KV80 standards, so this bracket is intended to engage that standard profile in adjustable shelving installations.
The 180 BR 16 designation identifies this KV180 bracket as a 16 inch length, which sets the intended shelf depth and load projection for the installation.
The web description states that 14-20 inch KV180 lengths are made from 14-gauge steel, so this 16 inch 180 BR 16 bracket uses 14-gauge steel construction.
The stated weight rating of 120-320 lb per pair, based on length, indicates the load range that two KV180 brackets can support when sized appropriately for the shelf.
The shelf lip at the end sets a positive edge for the shelf, while the 2 engagement teeth provide a more secure connection to the KV80 standard.
The Knape and Vogt 180 BR 16 part combines KV180 series design, 16 inch length, and Brass Look finish, so it suits adjustable shelf runs where appearance and depth both matter. The 14-gauge steel construction on this length and the stated 120-320 lb per pair weight rating range provide a defined structural role within the KV180 family. With 2 engagement teeth designed to work with KV80 standards and a shelf lip at the bracket end, this model supports aligned, repeatable shelf positions across a standards-and-brackets layout. For shelf, closet, or garage organization projects using KV80 uprights, this bracket offers a consistent way to extend a proven Knape and Vogt system.
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KV80B-36 Mfr# 80 BR 36 | 36" KV80 Regular-Duty Shelf Standard, Brass Finish | ||||
Sold in: 1 Each | KV80B-48 Mfr# 80 BR 48 | Standard Duty Shelf Standards Single Slotted - Knape And Vogt 80 BR 48 | ||||
Sold in: 1 Each | KV80B-60 Mfr# 80 BR 60 | 60" KV80 Regular-Duty Shelf Standard, Brass Finish | ||||
Sold in: 1 Each | KV80B-72 Mfr# 80 BR 72 | Standard Duty Shelf Standards Single Slotted - Knape And Vogt 80 BR 72 |
Sold In: 1 Each