
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
36 inch KV80 shelf standard defines this Knape and Vogt upright as part of the KV80 regular-duty system, so it works within a known series when laying out shelf runs in closets, garages, or storage walls. The KV Model: KV80 detail ties this standard to the KV180, KV181, KV160, or KV179 series brackets, which sets the bracket interface for planning load paths and spacing. The 36 inch length offers a mid-height option in the KV80 line, which helps when you need vertical adjustment without running floor-to-ceiling steel. The brass finish description identifies a brass look surface, which can align with warm-toned shelving or trim where visible hardware appearance matters. The 5/8 inch wide by 13/32 inch deep dimensions define the footprint on the mounting surface, which helps when working between studs or alongside face frames.
The screw holes spaced 12 inch apart on center give a regular vertical rhythm, so installers can mark just a few reference points and carry the pattern up or down the wall when fastening this KV80 standard. The 13/32 inch depth defines how far the steel projects from the mounting surface, which helps when aligning brackets so shelves clear adjacent walls, casework, or trim. The 36 inch length slots into the set of KV80 available lengths from 12 to 96 inches, which allows this piece to match mid-height shelving runs or stack with longer standards in taller installations. The relationship to KV180, KV181, KV160, and KV179 series brackets keeps the bracket hook geometry consistent, which supports repeatable bracket seating along the full run of the standard.
The KV Model: KV80 designation positions this 36 inch standard within Knape and Vogts shelf, closet, and garage organization hardware, so it fits regular-duty shelving where adjustable brackets are preferred. The 5/8 inch width and 13/32 inch depth let this upright sit neatly on case sides or wall panels, which is useful in built-ins where extra projection would interfere with doors or trim. The brass finish option supports projects where the standard remains visible, such as open shelving or closet systems with matching brass-look rods or hangers. The length options from 12 through 96 inches define a family around this piece, allowing this 36 inch size to be paired visually with longer or shorter KV80 standards in the same installation when consistent appearance matters.
The adjustable in 1 inch increments feature gives a uniform vertical grid for KV180, KV181, KV160, or KV179 series brackets, which simplifies aligning multiple shelf levels across several standards on a wall. The screw holes spaced 12 inch apart on center create a straightforward fastening pattern, so installers can transfer measurements between standards and keep rows plumb without constant re-measuring. The 16-gauge steel material provides a defined structural base for the regular-duty classification, which helps planners match shelf spans and bracket spacing to the strength of the standard. The specific manufacturer part number 80 BR 36 uniquely identifies this 36 inch brass-finish KV80 standard, which streamlines reordering or adding matching uprights during future modifications to the shelving layout.
The KV80 model is typically used with KV180, KV181, KV160, or KV179 brackets, so bracket hooks match the slot pattern for a consistent, adjustable shelf support system.
Adjustable in 1 inch increments means each slot is spaced 1 inch apart vertically, allowing shelf height changes in 1 inch steps while keeping alignment across multiple standards.
The KV 80 BR 36 shelf standard has a 36 inch length, which suits mid-height shelving runs or upper sections of closet and storage layouts.
This KV80 standard measures 5/8 inch wide by 13/32 inch deep, which defines its footprint on the mounting surface and its projection from the wall or panel.
Screw holes spaced 12 inches on center provide a regular fastening pattern, helping align fasteners with studs or backing and speeding layout during installation.
The KV 80 BR 36 uses 16-gauge steel with a brass look finish, combining a defined steel structure with a warm-toned appearance for exposed shelving systems.
The 36 inch KV80 regular-duty shelf standard in brass finish gives a defined length, material, and bracket interface for adjustable shelving layouts. The 5/8 inch by 13/32 inch profile, 1 inch slot increments, and 12 inch on-center screw holes support predictable planning on walls or casework. When a brass look and KV80 system compatibility match your design, this 80 BR 36 model from Knape and Vogt aligns with projects that call for a mid-height, regular-duty adjustable shelf standard.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 50 Each | KV80-80B Mfr# 80-80 BR | Multi-Color Installation Screws Flat Head Phillips Drive #8 Gauge, 1-1/2" Length, Brass - 50 Box Qty |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KV180B-10 Mfr# 180 BR 10 | Standard Duty Shelf Brackets Single Slotted - Knape And Vogt 180 BR 10 | ||||
Sold in: 1 Each | KV180B-14 Mfr# 180 BR 14 | Standard Duty Shelf Brackets Single Slotted - Knape And Vogt 180 BR 14 | ||||
Sold in: 1 Each | KV180B-16 Mfr# 180 BR 16 | Standard Duty Shelf Brackets Single Slotted - Knape And Vogt 180 BR 16 | ||||
Sold in: 1 Each | KV180B-8 Mfr# 180 BR 8 | Standard Duty Shelf Brackets Single Slotted - Knape And Vogt 180 BR 8 |