8" KV180 Regular-Duty Shelf Bracket, White Finish 10/Box

8 Inch KV180 Shelf Bracket White For KV Standards

8 inch KV180 shelf bracket white defines this Knape and Vogt regular-duty bracket, so installers get a known model that ties directly to KV80 standards for straightforward planning of closet, shop, or storage runs using a familiar standard-and-bracket layout. The bracket is identified as KV Model KV180, which anchors it in the long-running KV standards system many shops already use across projects. The white finish supplies a clean, neutral appearance that fits typical residential closet interiors and light commercial shelving layouts where exposed hardware needs to stay low-profile. This 8 inch length sits in the middle of the available KV180 range, so it handles everyday shelf depths without driving loads too far from the standard. The component is part of the Shelf Standards and Brackets class, which positions it as a structural support element in adjustable shelving systems where reliable bracket-to-standard engagement matters.

Key KV180 Shelf Details That Support Jobs

• KV Model KV180 is typically used with KV80 standards, tying the bracket directly to a matching vertical standard so layout, spacing, and load paths stay consistent across an installation run.
• The bracket is described as regular-duty with a weight rating of 120-320 lb per pair based on length, so bracket selection can be matched to shelf span and loading expectations within that published range.
• An 8 inch length is one of several KV180 sizes from 4 inch through 20 inch, allowing installers to keep the same model family while stepping shelf depth up or down across a project.
• The white finish is one of several finishes available on KV180 brackets, giving planners flexibility to align visible hardware color with shelving, casework, or closet components.
• The bracket is made in the USA, which signals a domestic manufacturing origin for shops and facilities that standardize on US-made hardware for sourcing or project requirement reasons.

Mounting And Engagement Details For KV180 Bracket

The 8 inch KV180 regular-duty shelf bracket is described as typically used with KV80 standards, so its hook profile and engagement geometry are intended to seat into that standard family for stable vertical support. The bracket has 2 engagement teeth to fasten the bracket securely to the standard, which means the load transfers through two defined contact points rather than a single hook, supporting more positive seating under load. A shelf lip at the end of the bracket provides a formed edge that relates directly to the front of the shelf, helping position the shelf against the bracket so the bearing surface is maintained along the bracket length. Together, these mounting features define how the bracket interfaces with the vertical standard and the shelf itself in an adjustable system.

How This 8 Inch KV180 Bracket Performs In Use

Using KV180 With KV80 Standards In Shelving Runs

The KV Model KV180 is identified as typically used with KV80 standards, so when installers build a run with KV80 uprights, this 8 inch bracket slots into the same system for consistent spacing and load transfer along the wall. The weight rating of 120-320 lb per pair based on length ties bracket performance directly to size selection, so choosing the 8 inch version aligns the bracket capacity with moderate-depth shelving where loads sit closer to the standard. Being part of Shelf, Closet and Garage Organization, as well as the Shelf Brackets and Standards category, positions this component for closet, garage, and general storage applications that rely on adjustable standards rather than fixed cleats. In those environments, staying inside the rated load range for the selected length supports service life while allowing shelves to be re-positioned as storage layouts change.

Material, Lip, And Finish That Influence Results

The KV180 line uses 16-gauge steel in the 4 inch through 12 inch lengths, which covers this 8 inch bracket, so the support arm is cut and formed from heavier sheet stock that resists flex in everyday regular-duty loading. That gauge choice places the 8 inch model in the lighter-length group, while longer 14 inch through 20 inch brackets step up to 14-gauge steel to address the higher bending moment of deeper shelves, showing how the family is engineered by size. The shelf lip at the end of the bracket creates a defined edge that interacts with the shelf front, so the shelf nests consistently over the arm rather than drifting forward under use. The white finish sits alongside other KV180 finishes such as Anochrome, Almond, Black, Brass Look, Brown, and Titanium (special order), giving project planners a palette to match visible hardware to surrounding casework or standards while still drawing on the same rated bracket family.

Common Questions About KV180 8 Inch White Bracket

Selecting This 8 Inch KV180 Bracket For Runs

The 8 inch KV180 regular-duty shelf bracket in white combines a defined length, 16-gauge steel construction, and a rated 120-320 lb per pair range tied to bracket size, giving installers concrete parameters when laying out shelving. Its typical use with KV80 standards and two-tooth engagement describes exactly how it enters an existing standard-and-bracket system, while the shelf lip codifies the way the shelf seats on the arm. With white among several available finishes and this bracket positioned within the Shelf Standards and Brackets class, trade buyers can align look, length, and rating to the shelving runs they are planning.