
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
24 inch KV80 shelf standard defines this Knape and Vogt upright as a standard-duty support for adjustable shelving where a 24 inch length is appropriate. This gives installers a compact run for short closet sections, utility areas, or tight garage spans. The white finish matches typical white shelving layouts, helping projects look consistent across uprights and brackets in visible installations. The standard is made from 16-gauge steel, providing a sturdy steel backbone for shelf brackets in everyday storage applications. At 5/8 inch wide and 13/32 inch deep, the profile gives a slim face while still offering enough depth to accept the matching bracket tabs. The product is identified as KV Model KV80, tying directly to the KV80 standard-duty system. The manufacturer part number 80 WH 24 ties length, series, and white finish together for repeat ordering on future jobs.
The KV80 standard-duty shelf standard has screw holes spaced 12 inches apart on center, giving installers predictable fastening points at the top and bottom of this 24 inch upright. This spacing supports repeatable layouts when multiple uprights are mounted in a row. The 5/8 inch width and 13/32 inch depth define how the standard sits on the wall, allowing planning around trim, corner locations, or adjacent components. The 1 inch adjustment increments in the slot pattern let shelves move up or down in fixed steps, helping align brackets across several standards without uneven spacing. Identifying the product as KV Model KV80 and length 24 inches helps match drilling patterns and slot layouts to other KV80 uprights on the same job.
The KV80 24 inch standard-duty shelf standard fits jobs where a shorter vertical run is needed, such as low closet sections, over-workbench storage, or narrow wall spaces. The 24 inch length limits the vertical span, which can be useful under windows or above fixed casework where a full-height upright would interfere. Since this upright is part of the KV80 system, it is typically used with KV180, KV181, KV160 or KV179 series brackets, tying the standard directly into common Knape and Vogt shelf hardware. The 5/8 inch wide face keeps the standard visually narrow against the wall, which can matter in closet or garage layouts where multiple uprights sit side by side. The white finish supports use against white or light-colored walls, helping the standard blend into typical closet systems and painted storage areas.
The 1 inch adjustment increments support applications where shelf spacing may change over time, such as seasonal clothing, bins, or general storage. Using the same KV80 model across a project means slot geometry remains consistent, so brackets from the noted series can be moved between standards without misalignment. The 16-gauge steel construction suits the standard-duty classification of this line, supporting typical closet and storage shelf loads when used with the appropriate wall fasteners and brackets. Because the screw holes are spaced 12 inches apart on center, installers can plan fastener locations to land in known stud or blocking positions within this 24 inch height, which helps when organizing shorter uprights between taller runs or around obstacles.
The product is identified as KV Model KV80, which designates it as a standard-duty shelf standard in the Knape and Vogt system, guiding bracket selection for matching KV180, KV181, KV160 or KV179 series brackets.
The standard has a 24 inch length, giving a short vertical run that fits under windows, above counters, or in compact closet sections where full-height uprights are not required.
The KV80 standard is adjustable in 1 inch increments, letting shelves move up or down in consistent 1 inch steps to align levels across multiple uprights or fine-tune usable storage height.
The web description states it is typically used with KV180, KV181, KV160 or KV179 series brackets, so these brackets match the slot design for the KV80 system.
The standard measures 5/8 inch wide by 13/32 inch deep, which defines its face width on the wall and the depth available for engaging bracket tabs in the slots.
The screw holes are spaced 12 inches apart on center, giving two fastening points over the 24 inch length, which helps distribute load into the wall using evenly spaced anchors.
The Knape and Vogt 24 inch KV80 standard-duty shelf standard in white finish combines a defined 24 inch length with 1 inch adjustment increments, 16-gauge steel construction, and screw holes spaced 12 inches on center. These details support consistent, repeatable shelf layouts alongside other KV80 uprights using KV180, KV181, KV160 or KV179 series brackets. For projects needing a short, white, 5/8 inch wide upright that aligns with the KV80 slot pattern, this shelf standard provides a known part number, 80 WH 24, to match existing runs or plan new sections with the same geometry.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KV180WH-10 Mfr# 180 WH 10 | 10" KV180 Regular-Duty Shelf Bracket, White Finish 10/Box | ||||
Sold in: 1 Each | KV180WH-12 Mfr# 180 WH 12 | 12" KV180 Regular-Duty Shelf Bracket, White Finish 10/Box | ||||
Sold in: 1 Each | KV180WH-14 Mfr# 180 WH 14 | 14" KV180 Regular-Duty Shelf Bracket, White Finish 10/Box | ||||
Sold in: 1 Each | KV180WH-16 Mfr# 180 WH 16 | 16" KV180 Regular-Duty Shelf Bracket, White Finish 10/Box | ||||
Sold in: 1 Each | KV180WH-18 Mfr# 180 WH 18 | 18" KV180 Regular-Duty Shelf Bracket, White Finish 10/Box | ||||
Sold in: 1 Each | KV180WH-6 Mfr# 180 WH 6 | 6" KV180 Regular-Duty Shelf Bracket, White Finish 10/Box | ||||
Sold in: 1 Each | KV180WH-8 Mfr# 180 WH 8 | 8" KV180 Regular-Duty Shelf Bracket, White Finish 10/Box |