Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
13/16 KV237 steel shelf support clip describes a Knape and Vogt steel shelf support designed specifically for shelving layouts that use KV233 pilasters only, so it matches that standard and keeps planning straightforward on repeat projects. The clip measures 1 inch wide and 13/16 inch in length, giving a compact footprint that still offers defined support under the shelf edge where pilaster-mounted systems carry the load. The shelf support has a wider profile of 13/16 inch, so it makes broader contact with the pilaster, which helps the shelf sit more firmly against the standard. The part is formed from 23 gauge steel, giving a light but consistent metal thickness that suits typical cabinet and closet shelf loads without adding bulk in tight pilaster runs. A zinc finish on the steel shelf support adds a plated surface that fits well with common pilaster finishes in cabinet interiors.
This Knape and Vogt 13/16 inch steel shelf support clip is specified for use with KV233 pilasters only, so fit is aligned to that pilaster format when planning shelf spacing. With its 1 inch wide by 13/16 inch length size, the clip presents a compact bearing surface that sits directly in the pilaster line, so the shelf edge stays close to the standard. The shelf support area has a wider 13/16 inch profile, so the support contacts more of the pilaster face and helps stabilize the shelf against movement along the track. Formed from 23 gauge steel, the clip maintains a slim form factor, so multiple supports can be positioned in tight vertical increments on KV233 pilasters without interference. The zinc-plated surface on the steel clip offers a clean, bright metal look that pairs well with typical cabinet and closet interior hardware.
The Knape and Vogt 13/16 inch KV237 steel shelf support clip is designed for use with KV233 pilasters only, so it fits directly into shelving systems built around those pilaster standards in cabinets, closets, or storage runs. The 1 inch width of the clip matches well with pilaster spacing, so it sits neatly along the standard while the 13/16 inch length extends just enough to carry the shelf edge without projecting excessively into the cabinet interior. Because the shelf support has a wider 13/16 inch profile where it bears on the pilaster, the clip provides a broad contact area that helps the shelf rest squarely against the pilaster face, which is helpful when aligning multiple shelves at the same height across a bank of cabinets. The zinc-plated steel finish coordinates with common metal pilasters, so the hardware presents a consistent look in open or glass-front installations.
The KV237 steel shelf support clip is specified as 23 gauge steel, so each clip has a repeatable material thickness that helps shelves line up evenly when several support points are used along KV233 pilasters. The compact 1 inch by 13/16 inch size means the clip supports the shelf close to the pilaster, which can help maintain straight runs where front edges need to stay in line. The 13/16 inch wide support profile increases the area of metal under the shelf edge, so the load transfers across more of the pilaster and reduces stress on a single narrow point. Because the clip is identified by the manufacturer part number 237 ZC, it can be matched precisely to existing Knape and Vogt layouts that specify this part, supporting straightforward replacement or expansion of shelf rows. The zinc-plated surface on the steel support adds a finished appearance that suits shop-built cabinetry and closet systems using KV233 pilasters.
The KV237 steel shelf support clip is for use with KV233 pilasters only, so it is intended specifically for shelving systems built around that pilaster series.
The Knape and Vogt shelf support measures 1 inch wide by 13/16 inch length, so it presents a compact yet functional bearing surface under the shelf.
The shelf support has a wider 13/16 inch profile, so it provides broader contact with the pilaster and helps the shelf rest more securely against the standard face.
The KV237 shelf support clip is made from 23 gauge steel, so it offers a thin, consistent metal section suitable for multi-support shelf runs.
The 237 ZC steel shelf clip has a zinc-plated finish, so it provides a uniform metallic appearance compatible with typical pilaster hardware.
The 13/16 inch KV237 steel shelf support clip is produced by Knape and Vogt, so it ties directly into that brand's KV233 pilaster shelving systems.
The Knape and Vogt 13/16 inch KV237 steel shelf support clip, part number 237 ZC, is built for use with KV233 pilasters only, so it suits projects already laid out around that standard. With its 1 inch wide by 13/16 inch length size and 13/16 inch wide support profile, the clip supplies focused bearing where shelves meet the pilaster while keeping hardware compact in cabinet interiors. The 23 gauge steel and zinc-plated finish provide a familiar, consistent Knape and Vogt component for shelf support within KV233-based systems.
Sold In: 1 Each
