Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
36 inch KV233 pilaster standard gives you a heavy-duty vertical track for building adjustable shelving runs in cabinets, closets, or storage layouts. The 13/16 inch wide profile defines the bearing surface for shelf supports, so brackets sit consistently for predictable load transfer into the cabinet or wall. At 3/16 inch deep, the standard sits close to the mounting surface, which helps keep shelf edges near flush while still giving enough depth for secure bracket engagement. This Knape and Vogt standard uses bright zinc finish on 23-gauge high strength steel, which provides a hard, smooth surface that resists routine wear as supports are repositioned. BHMA Grade 1 compliant construction reflects a tested, heavy-duty standard, useful where shelving is expected to carry demanding loads in regular service. As part of the KV233 series, this length ties into a full range of matching sizes and finishes for consistent layout.
This 36 inch KV233 pilaster standard is laid out for flush or surface mount, so you can fasten it directly to cabinet sides or to a solid backing panel without shimming for fit. Pre-drilled screw or nail holes spaced 6 inches on center provide a repeatable fastening pattern, which simplifies lining up multiple standards in a run and helps distribute load evenly into the substrate. Stamped numbers along the standard give a visual reference during installation, so matching shelf levels between left and right standards is faster and less dependent on repeated tape measurements. Recommended fasteners are KV255-8 nails, sold separately, and that pairing gives you a known, tested fixing approach for typical wood cabinet or closet construction.
The KV233 pilaster standard sits in the Shelf Standards & Brackets class, which places it naturally in cabinet interiors, closets, and garage or utility storage where adjustable shelves are needed. As part of the Shelf, Closet & Garage Organization family, this 36 inch length suits mid-height cabinets or lower sections of tall storage where you want multiple shelf positions without running a full-height track. The 13/16 inch wide by 3/16 inch deep section keeps the standard compact, so it fits inside typical cabinet side panels without crowding door clearances, while still giving enough steel around each slot to support heavy-duty use. Because the pilaster is designed for flush or surface mounting, it works on finished cabinet sides, on separate gable panels, or on structural wall cleats where you need the standard aligned to a visible front edge. Bright zinc finish ties in visually with other zinc-coated hardware from Knape and Vogt, helping you maintain a consistent hardware look across a project. The BHMA Grade 1 compliant rating means this standard slots into demanding commercial or busy residential storage where shelf positions may be adjusted frequently.
The adjustable slots in 1/2 inch increments define how precisely you can set shelf heights; that small step size lets you align shelving to stored bin heights or equipment dimensions instead of compromising with large vertical jumps. Stamped numbers along the pilaster translate those increments into quick reference points, so an installer can match the same number on each side rather than relying solely on a tape, reducing layout time when setting multiple shelves. The pre-drilled screw or nail holes on 6 inch centers give a clear fastening rhythm, helping keep each standard straight and parallel as you work down a case side or wall panel. Using 23-gauge high strength steel for the body keeps the pilaster slim yet strong, which supports tight cabinet tolerances while still carrying heavy-duty bracket loads. The 36 inch overall length provides a defined adjustment range: it is tall enough for several shelf positions while remaining manageable during handling and alignment inside assembled cabinets. Bright zinc finish supports smooth bracket insertion and removal over the life of the installation, because the coated surface helps resist abrasion from repeated support repositioning.
The 36 inch KV233 pilaster standard is a Knape and Vogt shelf standard in the Shelf Standards & Brackets class, so it serves as the vertical track that supports adjustable shelf brackets.
The 1/2 inch adjustable slots on the KV233 pilaster standard let you position shelves in small height increments, helping you match shelf spacing to stored items more closely.
The KV233 pilaster is designed for flush or surface mount applications, so it can be fixed directly to cabinet sides or mounting panels while keeping shelf brackets aligned.
BHMA Grade 1 compliance on this pilaster standard indicates a heavy-duty construction level, which supports demanding shelving loads in commercial or active residential storage.
The KV233 36 inch pilaster standard measures 13/16 inch wide by 3/16 inch deep, which keeps it compact for cabinet interiors while still supporting sturdy bracket engagement.
The KV233 pilaster standard is specified with KV255-8 nails, sold separately, as the recommended fasteners, giving a matched approach for typical wood cabinet or closet substrates.
The 36 inch KV233 heavy-duty steel pilaster standard from Knape and Vogt gives you BHMA Grade 1 performance, bright zinc finish, and 1/2 inch slot increments for controlled, repeatable shelf positioning. With flush or surface mount capability, pre-drilled 6 inch on-center fastening holes, and stamped numbers, it supports efficient installation and straightforward future adjustments. Use this 13/16 inch wide by 3/16 inch deep standard when you want a compact, strong track that ties into the broader KV233 system for organized cabinet, closet, or garage storage layouts.
Sold In: 1 Each
