Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
60 inch KV233 pilaster standard gives you a heavy-duty vertical track for adjustable shelving runs in cabinets, closets, or storage walls. The Knape and Vogt KV233 model is built from 23-gauge high strength steel, so it carries typical shelf loads in woodwork and storage builds while keeping deflection under control for the length. The bright zinc finish provides a clean, metallic look that blends with common hinges and slides in utility cabinetry. At 13/16 inch wide x 3/16 inch deep, the standard sits low-profile on the wall or cabinet side, which preserves usable shelf width and helps when fitting near face frames or returns. BHMA Grade 1 compliance means the pilaster is tested to a recognized commercial performance level, giving installers a predictable track when repeating the layout across multiple openings.
The 60 inch KV233 heavy-duty steel pilaster standard is intended for flush or surface mounting, so you position it directly on cabinet sides or wall framing without routing a recess. The 13/16 inch width gives a narrow footprint, helping it land fully on common cabinet side thicknesses for secure fastening. Pre-drilled holes every 6 inches on center guide screw or nail placement along the length, which keeps the standard tight to the substrate and supports higher shelf loads. Slots cut for shelf supports in 1/2 inch increments allow you to walk shelves up or down in predictable steps, useful when aligning several openings to the same finished shelf heights in a run.
The KV233 pilaster standard at 60 inches suits tall cabinet interiors, pantry units, and closet sections where multiple adjustable shelves are needed. Its 23-gauge high strength steel construction supports repeated bracket engagement over the full height, which is helpful when occupants move shelves frequently over time. Because it is designed for flush or surface mount installations, it works on cabinet sides, partitions, or wall studs without additional machining, supporting both shop-built and site-built storage. The bright zinc finish coordinates with other zinc-plated hardware in utility and commercial spaces, so the hardware appearance remains consistent when interiors are open or when shelves sit above eye level. BHMA Grade 1 compliance places this standard in a performance class suited for demanding environments such as commercial cabinetry, institutional storage, or busy household pantries where the system is used daily.
The 13/16 inch width and 3/16 inch depth of the KV233 pilaster give installers known dimensions to work from when planning reveals and clearances around doors and face frames, helping avoid interference with hinges and pulls. Slots set on 1/2 inch increments provide fine vertical resolution, letting you dial in shelf positions to match specific contents or align across multiple cabinets in a bank. Stamped numbers along the pilaster provide a built-in reference scale, so you can place brackets on the same number on opposing standards, which keeps shelves level without external measuring on every adjustment. Pre-drilled screw or nail holes at 6 inches on center simplify fastener spacing, reducing layout time and delivering consistent pull-out resistance along the track. Using the recommended KV255-8 nails (sold separately) ties the installation back to a fastener type identified by Knape and Vogt, supporting predictable holding behavior when you repeat this standard on multiple jobs.
The KV233 pilaster standard in this listing is 60 inches long, which suits tall cabinet sections or closet areas needing multiple adjustable shelves along a single vertical run.
The 233 ZC 60 pilaster measures 13/16 inch wide by 3/16 inch deep, allowing a slim profile on cabinet sides or wall surfaces while still giving a stable track for shelf supports.
The Knape and Vogt KV233 pilaster is designed for flush or surface mount applications, so it fastens directly to cabinet sides or walls using the pre-drilled holes.
The 60 inch KV233 standard has pre-drilled screw or nail holes spaced 6 inches apart on center, which guides consistent fastening along the full length.
The KV233 pilaster has slots for supports adjustable in 1/2 inch increments, enabling fine shelf height changes while keeping alignment straightforward.
This shelf standard is made from 23-gauge high strength steel with a bright zinc finish, giving structural performance with a clean, metallic appearance inside cabinets.
The 60 inch KV233 heavy-duty steel pilaster standard from Knape and Vogt gives you a BHMA Grade 1 compliant track with 1/2 inch adjustment steps, 13/16 inch width, and pre-drilled fastening holes every 6 inches on center. These details support efficient layout and consistent shelf performance across cabinet banks, closets, and utility storage. For projects matching this length and adjustment pattern, this bright zinc 233 ZC 60 pilaster provides a repeatable solution you can use across multiple openings and installations.
Sold In: 1 Each
