
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Knape and Vogt 3-1/4 anochrome flush pull identifies this piece as a compact recessed pull from Knape and Vogt that sits flush to the surface, so doors or panels stay low-profile where projection could interfere with movement. Being part of the Recessed Pull Series means the grip is set into the material thickness, which helps when doors need to slide past each other or into tight reveals. The solid brass construction provides a dense, stable pull body, which supports repeated grasping on cabinet, closet, or similar light door applications. Its anochrome finish gives the brass a uniform metallic tone, letting it coordinate with other anochrome components for a consistent hardware look. The rectangular size of 1-3/4 inches by 3-1/4 inches sets a defined pull area, so fabricators can plan cutouts and layouts to match adjacent hardware across a run of doors or panels.
This solid brass recessed pull measures 1-3/4 inches wide by 3-1/4 inches long, so the cutout and surrounding face area can be planned for both grip access and visual balance on the door. With a 9/16 inch deep body, the recess must accommodate just over half an inch of depth, which is significant when working with thinner doors or panels. The anochrome finish on the flush pull offers a consistent metallic look, which helps when aligning several pulls in a row so reflections and color read uniformly. Being classified as a flush pull in the Recessed Pull Series means the hand contact point remains within the door thickness, an advantage on pocket or sliding doors that pass close to jambs or adjacent cabinet faces.
This solid brass recessed pull from Knape and Vogt, identified as 819X ANO, suits installations where a low-profile grip is needed, such as sliding cabinets, closet doors, or panels that move past each other. The 3-1/4 inch length provides enough span for a practical finger pull, while the 1-3/4 inch width keeps the footprint compact on narrower stiles or rails. Its 9/16 inch depth allows the pull to be set into the door so the face remains nearly flush, which is useful where adjacent panels run close and any projection would rub. The anochrome finish ties into projects using similar anochrome decorative hardware, helping maintain one visual theme across cabinet handles, pulls, and other trim elements in the same room.
The defined 1-3/4 inch by 3-1/4 inch size on this recessed pull helps installers repeat the same cutout and layout measurements from door to door, which keeps hardware lines straight and reduces layout rework. Its 9/16 inch deep body gives a clear machining target for routing or mortising, so fabricators can select bits and passes that respect the remaining material thickness. Being part of the Recessed Pull Series means its form factor follows a consistent pattern, which simplifies jigs or templates built specifically around this profile. The solid brass construction offers a stable substrate under the anochrome finish, supporting a uniform surface where fingers contact the pull repeatedly. The combination of flush design and defined dimensions gives both shops and field installers a predictable component to integrate into cabinetry, sliding panels, or other light door assemblies.
The Knape and Vogt 819X ANO flush pull measures 1-3/4 inches by 3-1/4 inches, which sets the footprint on the door face and guides sizing for routing or mortising the recess.
This recessed pull is 9/16 inch deep, so the routed or mortised pocket must accept that depth while leaving sufficient remaining door or panel thickness.
The Knape and Vogt 3-1/4 anochrome flush pull is made from solid brass, giving a dense metal body that supports frequent use on cabinet or light door applications.
This solid brass recessed pull has an anochrome finish, providing a specific metallic tone that coordinates with other anochrome decorative hardware elements.
This pull is identified by manufacturer part number 819X ANO and is described as part of the Knape and Vogt Recessed Pull Series for flush-mounted applications.
This flush pull sits recessed into the surface, which helps sliding or pocket doors move close to adjacent panels without a projecting handle catching or rubbing.
This Knape and Vogt flush pull pairs a 1-3/4 inch by 3-1/4 inch recessed body with 9/16 inch depth, giving clear parameters for routing into cabinet or light door faces. Solid brass construction with an anochrome finish supports a consistent metallic appearance alongside matching decorative hardware. As part of the Recessed Pull Series, it provides a low-profile grip option where doors travel close to adjacent surfaces. For projects specifying anochrome hardware and flush-mounted pulls, this 819X ANO recessed pull offers a defined size and finish that help streamline layout and coordination.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KV819XBR Mfr# 819X BR | Knape and Vogt Recessed Pulls Solid Brass 1-3/4" x 3-1/4" x 9/16" Dull Brass, 819X BR |