Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
24 inch KV87 shelf standard defines this Knape and Vogt upright as a heavy-duty component for adjustable shelving runs in closets, garages, or utility areas where consistent support is important. The standard is 7/8 inch wide by 11/16 inch deep, so layout planning can account for the face dimension and projection when spacing uprights along a wall or cabinet side. Its 24 inch length suits shorter runs, low sections, or staggered layouts under existing shelves. The design is typically used with KV186 or KV187 series brackets, which means the bracket hooks and slots are matched for secure engagement along the standard. A 2 inch slot adjustment pattern lets brackets relocate up or down in regular increments, giving predictable shelf height changes across multiple uprights.
This KV87 super heavy-duty shelf standard relies on a vertical screw-mount installation, using the pre-punched holes that are spaced 12 inches on center. That spacing offers a predictable fastening pattern into studs, blocking, or cabinet sides when planning the layout. The slots accept brackets that adjust in 2 inch increments, so every shelf height change follows the same step across all standards in a run. This pattern makes it easier to keep shelves level because each KV186 or KV187 bracket position corresponds to the same slot index. The 7/8 inch width and 11/16 inch depth define how the upright sits against the mounting surface, which matters when aligning it next to face frames, pilasters, or adjacent panels.
The KV87 super heavy-duty shelf standard is part of a shelf standards and brackets system for closet, garage, and general organization work. Its 24 inch length suits lower sections, short vertical bays, or areas where taller uprights are not required, such as under windows or work surfaces. The anochrome finish gives a neutral metallic look that blends with typical closet hardware and many shop or storage interiors. At 7/8 inch wide, the standard does not occupy excessive face space on cabinet sides or partition panels, while the 11/16 inch depth keeps the upright close to the mounting surface. Typical use with KV186 or KV187 series brackets ties this standard into a known bracket family, so the hook pattern and slot size are matched for proper engagement along the upright.
The heavy duty 12 gauge steel construction is suited for applications where shelving may carry higher loads, provided the rest of the installation is built to match. BHMA Grade 2 compliance identifies a defined performance level, which is helpful for commercial millwork, institutional storage, or higher-use residential projects that refer to graded hardware. Because the KV87 series offers multiple lengths from 24 inches through 96 inches, layouts can mix this 24 inch version with longer standards in the same run when the mounting heights vary.
The KV87 adjustable slot design uses a 2 inch increment, which keeps shelf heights repeatable across any number of standards in a wall section. When KV186 or KV187 brackets engage those slots, every shelf position ties back to the same indexed notch, reducing the chance of misaligned levels. Screw holes spaced 12 inches on center help installers pre-mark fastening positions, which benefits jobs with multiple bays, because every standard can follow the same drilling template. The 7/8 inch width offers a consistent reference edge when aligning uprights relative to door openings, cabinet divisions, or end panels.
KV87 super heavy-duty shelf standard construction from 12 gauge steel supports a stiffer upright, which in turn helps the bracket and shelf assembly maintain position under typical design loads for this class. The anochrome finish contributes a smooth surface that works well in visible closet runs and utility areas where a bright, uniform appearance is desirable over time. BHMA Grade 2 compliance provides a tangible benchmark when documenting hardware choices for plans, bids, or specifications, helping keep product selection consistent across projects that standardize on a graded shelving system.
This KV87 super heavy-duty shelf standard is 24 inches long, which suits shorter bays, low sections, or installations under windows and counters where full-height uprights are not required.
The KV87 standard is typically used with KV186 or KV187 series brackets, so the hook pattern and slot design are matched for proper engagement along the upright.
The KV87 standard uses 2 inch slot adjustment, so every shelf height change follows the same increment, helping keep multiple shelves level across several uprights in a run.
This shelf standard measures 7/8 inch wide by 11/16 inch deep, which defines how far it projects from the mounting surface and how much face space it occupies on panels or walls.
The KV87 standard is made from heavy duty 12 gauge steel and is BHMA Grade 2 compliant, giving a defined performance level for commercial or higher-use residential installations.
This 24 inch KV87 super heavy-duty shelf standard has an anochrome finish, providing a neutral metallic appearance suitable for closets, garages, and utility storage areas.
The 24 inch KV87 super heavy-duty shelf standard in anochrome from Knape and Vogt offers 2 inch slot adjustment, 7/8 inch by 11/16 inch dimensions, heavy duty 12 gauge steel, and BHMA Grade 2 compliance. Those details support organized, repeatable layouts in closets, garages, or storage bays using matching KV186 or KV187 brackets. For runs that call for a shorter upright with graded performance and a neutral metallic finish, this 24 inch KV87 standard gives a defined set of dimensions and adjustment features to build around.
Sold In: 1 Each
