Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
96 inch KV87 shelf standard defines this Knape and Vogt upright as a tall, continuous support for adjustable shelving runs, so long wall sections in closets, garages, or storage areas can use a single uninterrupted standard for alignment.
The KV Standard Model KV87 designation ties this piece to a proven standard line typically used with KV186 or KV187 series brackets, which helps installers match uprights and brackets from the same system for consistent fit.
Heavy duty 12 gauge steel construction gives the standard significant strength for super heavy-duty use, which supports demanding storage applications where brackets and shelves carry substantial weight on each upright.
The anochrome finish on the 87 ANO 96 model provides a uniform metallic look on the face of the standard, which suits exposed utility, commercial, or workshop shelving where a clean, neutral finish is preferred.
The 96 inch length provides full-height coverage from floor to near-ceiling in many installations, which reduces joint points between sections and helps maintain straight, plumb shelf alignment over tall vertical runs.
Screw holes spaced 12 inches apart on center give a regular fastening pattern along the 96 inch KV87 super heavy-duty shelf standard, which helps installers anchor into studs or other structure at predictable intervals along the wall.
Recommended fasteners #10 flat-head wood screw (sold separately) match the countersunk holes in the standard, which helps the upright sit flush to the wall so KV186 or KV187 series brackets seat properly in the slots.
The 2 inch slot adjustment built into the KV Standard Model KV87 allows shelf brackets to be repositioned in 2 inch increments, which simplifies raising or lowering shelves in repeatable steps without re-drilling or moving the upright.
The 7/8 inch width of the standard keeps the mounting footprint compact, which helps when laying out multiple uprights side by side while still leaving room for bracket arms and shelf overhang at the front edge.
The 96 inch KV87 super heavy-duty shelf standard length works well for tall shelving runs in closets, garages, and utility spaces where continuous adjustment from low to high positions is needed along a single vertical line.
Being part of the KV Standard Model KV87 family typically used with KV186 or KV187 series brackets, this upright serves as the structural backbone of adjustable shelf systems where those bracket types are already part of the project plan.
Dimensions of 7/8 inch wide by 11/16 inch deep allow the standard to sit close to finished walls, which suits applications along hallways, storage rooms, or shop walls where projecting hardware needs to remain compact.
The anochrome finish on the 87 ANO 96 standard provides a consistent metallic surface that visually aligns with many bracket finishes, which supports neat-looking installations in open storage where hardware remains visible.
Available lengths across 24, 36, 48, 60, 72, 84, and 96 inches let designers and builders keep the same KV87 profile across different wall heights, which streamlines layout when mixing tall and short sections in the same project.
The 2 inch slot adjustment pattern on the KV87 shelf standard sets a predictable grid for bracket placement, which enables installers to line up multiple uprights so matching brackets sit level across an entire run of shelving.
Heavy duty 12 gauge steel construction helps the slot edges stay true when brackets are repositioned, which matters when shelves are frequently adjusted to accommodate changing storage needs over the life of the installation.
Screw holes spaced 12 inches apart on center help distribute load into the wall structure, which supports more even load sharing along the full 96 inch height rather than concentrating stress at only a few mounting points.
The BHMA Grade 2 compliant rating on this Knape and Vogt standard reflects its performance classification, which supports its use in projects where a documented hardware grade is part of the specification requirements.
The combination of a slim 7/8 inch wide profile and 11/16 inch depth means the standard does not dominate the wall surface, which allows the focus to remain on the shelving while still giving brackets a solid, precise engagement track.
Recommended #10 flat-head wood screw fasteners work with the countersunk mounting holes, which allows screw heads to sit flush and helps brackets slide cleanly past mounting points when adjusting positions up or down the standard.
The 96 inch KV87 shelf standard measures 96 inches long, which supports full-height wall installations where continuous bracket adjustment is desired from low positions up to near ceiling height.
The KV Standard Model KV87 is typically used with KV186 or KV187 series brackets, providing a coordinated upright-and-bracket system for adjustable shelving layouts.
The 96 inch KV87 standard has screw holes spaced 12 inches apart on center, giving a regular pattern for anchoring into wall framing or other structural backing along the height.
The KV Standard Model KV87 provides 2 inch slot adjustment, so KV186 or KV187 brackets can be moved in 2 inch increments to change shelf height across the system.
The 87 ANO 96 standard is made from heavy duty 12 gauge steel with an anochrome finish, giving strong structural performance with a neutral metallic appearance on the wall.
The KV87 shelf standard uses recommended fasteners of #10 flat-head wood screw (sold separately), which match the countersunk holes to keep the upright seated tightly against the wall surface.
The 96 inch KV87 super heavy-duty shelf standard from Knape and Vogt combines heavy duty 12 gauge steel, BHMA Grade 2 compliance, and 2 inch slot adjustment, giving installers a defined upright to build tall, adjustable shelf runs using KV186 or KV187 brackets.
Sold In: 1 Each
