
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
red oak edgebanding from Edgemate provides natural grade "A" real wood veneer, so cabinet and furniture edges match red oak surfaces with consistent appearance. The veneer is expertly matched and sanded to 180 grit, which delivers a smooth surface that is ready for finishing steps suited to pre-finished material. At 0.5mm thick, this wood edgebanding offers a low-profile edge that blends well with veneer panels while maintaining a wood feel at the edge. The veneer is undetectable finger jointed, creating a continuous look along long cabinet runs without visible breaks. Laminating the veneer to a continuous fleece membrane helps support the thin veneer during edging operations, which matters when feeding material through edgebanders or applying by hand. This pre-finished, unglued construction lets installers choose their own adhesive system and workflow.
This Edgemate red oak edgebanding is specified at 0.5mm thick and 7/8 inch wide, which suits many panel edge applications where a modest overhang is trimmed after bonding. The real wood veneer is laminated to a continuous fleece membrane, providing backing support that can help the strip track evenly through an edgebander or stay stable during manual application. The veneer is pre-finished on the face and unglued on the back, so the bonding surface remains open for shop-selected adhesives applied by machine or by hand. Finger jointed construction joins veneer segments so that the joints are undetectable along the length, which keeps the visual field consistent on long cabinet sides or casework parts.
This real wood fleeceback edgebanding works wherever a natural grade "A" red oak veneer edge is needed on casework, cabinetry, or furniture components. The 7/8 inch width gives coverage for typical panel thicknesses with a small margin for trimming flush. The continuous fleece membrane backing supports the thin 0.5mm veneer during handling and bonding, which matters when edging multiple pieces in succession. Undetectable finger joints keep the veneer look consistent along the full 500 linear feet per roll, supporting long runs such as tall wardrobe panels or continuous shelving. Because the face is pre-finished, this material suits applications where edge color and sheen are factory-set, aligning the edges with other pre-finished red oak surfaces in the project environment.
The 0.5mm veneer thickness helps this Edgemate red oak edgebanding transition cleanly from edge to face, which reduces the visual step at the corner once trimmed. Sanding to 180 grit provides a smooth face that pairs well with the pre-finished treatment, supporting a uniform appearance panel to panel. The unglued back allows the installer to apply adhesive only where needed along the 500 linear feet roll, which helps manage workflow for both short batches and full production runs. Fleeceback construction stabilizes the veneer while it is applied and trimmed, supporting clean cuts and reduced edge chipping during follow-up machining. Finger jointed, laminated veneer creates a continuous strip, which simplifies layout when matching grain flow along cabinet runs or aligning edges across multiple doors and drawer fronts.
This Edgemate product uses natural grade "A" real red oak veneer, so exposed edges present genuine red oak, helping match red oak-faced panels or components in a project.
The edgebanding veneer is 0.5mm thick and 7/8 inch wide, providing coverage for typical panel edges while keeping the edge profile low for easy trimming and finishing alignment.
The edgebanding is pre-finished on the veneer face, which establishes the surface treatment at the factory and supports consistent appearance across multiple edged components.
This product uses a continuous fleece membrane backing, which supports the thin 0.5mm veneer during handling and edging operations, helping maintain stability through application and trimming.
This edgebanding is unglued, leaving the back surface open so installers apply their preferred adhesive systems to fit shop equipment and workflow needs.
Each roll provides 500 linear feet, supporting extended cabinet or casework runs and allowing multiple projects to be completed from a single continuous length.
This pre-finished, unglued Edgemate red oak edgebanding combines natural grade "A" real wood veneer with a continuous fleece membrane backing, undetectable finger joints, and 0.5mm by 7/8 inch dimensions. Those details support clean, consistent red oak edges across long cabinet runs, furniture components, and casework panels. With 500 linear feet per roll, this edge banding suits both production shops and serious woodworkers needing continuous veneer edging for multiple projects.
Sold In: 500 Lineal Ft
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 500 Lineal Ft | WT680WHBIRCH-7/8PF Mfr# 4971004 | White Birch Edgebanding Real Wood Fleeceback-Sanded Wood Edgebanding, Pre-Finished, Unglued Unglued, Fleecebacked 0.5mm Thick x 7/8" Width | ||||
Sold in: 500 Lineal Ft | WT680MAPLE-7/8PF Mfr# 4971000 | Maple Edgebanding Real Wood Fleeceback-Sanded Wood Edgebanding, Pre-Finished, Unglued Unglued, Fleecebacked 0.5mm Thick x 7/8" Width | ||||
Sold in: 500 Lineal Ft | WT680MAPLE-5/8PF Mfr# 4971050 | Maple Edgebanding Real Wood Fleeceback-Sanded Wood Edgebanding, Pre-Finished, Unglued Unglued, Fleecebacked 0.5mm Thick x 5/8" Width | ||||
Sold in: 500 Lineal Ft | WT680CHERRY-7/8PF Mfr# 4971002 | Cherry Edgebanding Real Wood Fleeceback-Sanded Wood Edgebanding, Pre-Finished, Unglued Unglued, Fleecebacked 0.5mm Thick x 7/8" Width |