Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Red Oak edgebanding from Edgemate is a real wood veneer edge banding that finishes exposed panel edges with natural red oak so cabinet, furniture, or fixture projects match surrounding wood surfaces. The product uses natural grade "A" real wood veneer, which provides a consistent red oak appearance suited to visible edges in woodworking jobs. The veneer is expertly matched and sanded to 220 grit, giving an even, ready-to-finish surface that reduces leveling work before final finishing. The veneer is undetectable finger jointed and laminated to a continuous fleece membrane, creating long, continuous lengths that track smoothly along straight runs and gentle curves. The edgebanding is 0.5 mm thick, so it covers cut edges without adding bulk that would change your panel dimensions. This size is 7/8 inch wide, giving coverage for common panel thicknesses while allowing slight overhang for trimming.
This Edgemate Red Oak edgebanding uses a 7/8 inch width, which gives enough coverage to edge typical panel thicknesses while still allowing a slight overhang for trimming flush on both faces. The 0.5 mm veneer thickness keeps the edge subtle, so the added material does not create a noticeable lip where the edge meets the face, supporting clean lines on cabinet sides and shelves. Because the edgebanding is unfinished and unglued, it accepts a range of finishing products applied after trimming, allowing the edge color and sheen to follow the same schedule as the rest of the workpiece. The continuous fleeceback construction supports use on appropriate automatic or manual edge banding equipment that handles fleece-backed veneers, keeping the material tracking stable along the run.
This Red Oak edgebanding real wood fleeceback, sanded wood, unfinished and unglued is suited to closing up exposed edges on red oak-faced panels in cabinets, casework, or furniture components where the edge will be seen. The natural grade "A" real wood veneer provides a surface that visually ties into other red oak elements in the same assembly, which is important on end panels, shelves, and door or drawer fronts. The 7/8 inch width helps when working with common panel sizes, giving enough overhang for clean trimming even if the cut line on the substrate is slightly irregular. Because the veneer is undetectable finger jointed and laminated to a continuous fleece membrane, it behaves like a single long strip, which supports continuous edging on runs of doors or long cabinet sides without visual breaks.
The expertly matched and sanded 220 grit veneer face means the surface is already leveled and smoothed, so you can move directly into trimming and finishing steps without heavy surface preparation. This reduces uneven staining or topcoat variation along the edge, supporting consistent color and sheen with the rest of the workpiece. The 0.5 mm thick veneer balances flexibility and coverage; it is thin enough to follow modest curves on appropriate equipment, yet thick enough to hide the panel core and give a solid wood appearance after trimming. The continuous fleeceback construction helps the strip feed predictably through compatible edge banding machines or during careful manual application, reducing wandering and helping the glue line stay uniform along the full 500 linear feet per roll. Because the material is sold in full roll quantities only, a single roll can cover substantial footage on multi-cabinet runs, supporting visual consistency across an entire room of matching red oak work.
This Edgemate red oak edgebanding uses natural grade "A" real wood veneer, so exposed panel edges present true red oak grain and color in cabinet and furniture work.
The veneer on this edge banding is 0.5 mm thick, which covers the panel core while keeping a low-profile edge that trims flush without creating a heavy lip.
This roll is 7/8 inch wide, providing coverage for typical panel thicknesses and leaving slight overhang for clean trimming on both faces.
This wood edgebanding is unfinished and unglued, giving a bare red oak surface and backing so finishing and adhesive selection can match your shop process.
The veneer is undetectable finger jointed and laminated to a continuous fleece membrane, creating long, consistent lengths that support smooth application on extended runs.
Each roll provides 500 linear feet and is sold in full roll quantities only, supporting shop-scale cabinet and casework projects with consistent material.
This Edgemate Red Oak edgebanding real wood fleeceback, sanded wood, unfinished and unglued, 0.5 mm thick by 7/8 inch wide, gives a natural grade "A" red oak edge ready for trimming and finishing. The undetectable finger jointed veneer on a continuous fleece membrane supports efficient runs, and the 500 linear feet per roll format suits multi-piece cabinet or furniture jobs. For projects calling for exposed red oak edges that visually align with adjacent panels, this roll-format edge banding provides the material characteristics needed for clean, consistent results in a professional or serious DIY shop.
Sold In: 500 Lineal Ft
