Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Anigre edgebanding real wood unglued gives you natural grade "A" real wood veneer for edging panels where a matching Anigre face is required, so your finished parts carry a consistent look across faces and edges. The veneer is unfinished, so you can stain or clear-finish Anigre surfaces and this edge together in one step, which keeps color and sheen uniform across the job. The 0.5 mm thick veneer provides a slim edge profile that blends well with typical veneer-faced panels, helping edges look integrated rather than built up. The material is supplied as real wood veneer, so it machines like wood during trimming and flushing, which supports clean cuts when using standard edge trimming tools. Because the product is unglued, you can use your preferred edgebanding adhesive system to match your existing workflow and equipment.
This Anigre edgebanding is 7/8 inch wide, so it covers common 3/4 inch panel thickness with some overhang for trimming, giving you room to flush the edge cleanly after application. The edging is laminated to a continuous fleece membrane, which stabilizes the thin real wood veneer during handling and application, supporting straighter application along the panel edge. Being unglued, it is intended for use with separate edgebanding adhesive, so it aligns well with edgebanders and manual setups designed for non-pre-glued tapes. The 0.5 mm veneer thickness works well with standard trimmers and routers, helping you dial in a smooth, flush result without heavy cutting passes. Because the veneer is sanded to 220 grit, it accepts finish right after trimming, which helps keep your installation and finishing sequence efficient.
This Edgemate Anigre edgebanding real wood unglued product is categorized as edge banding, so it is intended for capping exposed edges on panels and similar components. The natural grade "A" real wood veneer makes it a good match where the main surfaces use Anigre veneer, supporting a continuous appearance from face to edge. The 7/8 inch width suits many 3/4 inch panel applications, offering enough margin for trimming while staying efficient on material use. With veneer thickness at 0.5 mm, the edging pairs well with typical veneer sheet constructions, so once trimmed, the edge transition can feel close to a solid, seamless line. The continuous fleece membrane supports longer runs on cabinet sides, shelves, and doors by helping the thin veneer track steadily during feed and minimizing edge waviness caused by handling.
The expertly matched veneer, finger-jointed and laminated to a continuous fleece membrane, creates a visually continuous strip, which helps keep grain and color transitions subtle along long edges and around multiple parts in a project. Because joints in the veneer are described as undetectable, these transitions are designed to be hard to see in the finished edge, which reduces rework due to visible seams. The 220 grit sanded surface gives you an edge that is already smoothed to a fine level, so your sanding before finishing can focus on blending the edge to the face rather than leveling rough grain. Unfinished veneer lets your stain or clear coat penetrate and build directly on the wood, supporting finish schedules that aim to treat the entire assembly in one spray or wipe step. The unglued nature of the product fits into workflows where shops dial in adhesive type and spread rate for specific substrates, which can support consistent bond strength across different panel cores.
The Anigre edgebanding uses natural grade "A" real wood veneer, so the edge presents true Anigre wood that visually matches Anigre-faced panels in typical woodworking applications.
The veneer is 0.5 mm thick, giving a slim edge that trims easily and blends with veneer-faced panels without creating a bulky transition line after flushing.
This Anigre edgebanding is 7/8 inch wide, so it covers typical 3/4 inch panel edges with extra material for trimming to a clean, flush finish.
The Anigre edgebanding is unfinished, allowing stain or clear finish to be applied with the panel surfaces for consistent color and sheen on the final product.
This edgebanding is unglued, so it is suited for use with separate edgebanding adhesive systems that match your edgebander or manual application method.
The roll provides 500 linear feet, giving ample length for runs of cabinet sides, shelves, and doors in small to medium production or project work.
This Edgemate Anigre edgebanding real wood unglued roll combines natural grade "A" real wood veneer, 0.5 mm thickness, and 7/8 inch width to support clean panel edges that visually match Anigre faces. The expertly matched, undetectable finger-jointed veneer laminated to a continuous fleece membrane helps long runs appear seamless across multiple components. With an unfinished, 220 grit sanded surface, the edging is ready to take finish along with the rest of the workpiece. The 500 foot roll format suits shops that need consistent Anigre edging available for a series of cabinet or furniture jobs.
Sold In: 500 Lineal Ft
