Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Mahogany edgebanding real wood fleeceback gives you natural grade "A" real wood veneer so cabinet and furniture edges match your mahogany panels in color and grain, which keeps finished projects visually consistent from face to edge. The veneer is 0.5 mm thick, so you get a true wood edge that sands and blends with surrounding surfaces without feeling bulky. This edgebanding is unfinished and unglued, allowing you to choose your own adhesive and finish system to match existing shop standards or specific job requirements. Expertly matched and sanded 220 grit veneer helps the banding accept stain or clear finishes smoothly, saving surface prep time at the bench. The material is undetectable finger jointed and laminated to a continuous fleece membrane, creating a long, consistent run that supports efficient application on straight or automated edgebanding equipment.
This Edgemate mahogany edge banding in 7/8 inch width works well on common casework and shelving thicknesses, providing enough overhang for clean trimming on both faces. Because the edgebanding is unglued, you can pair it with hot-melt, contact cement, or other shop-standard adhesive systems appropriate for your equipment. The continuous fleeceback supports good glue distribution and stable tracking through edgebanders, which helps maintain alignment along the panel edge. With the veneer already sanded to 220 grit, only light finish sanding is typically needed after trimming, keeping the installation process focused on straight application and clean flush-trim passes.
This fleecebacked mahogany edge banding fits edge treatment on cabinets, furniture, and millwork that call for natural grade "A" real wood veneer at exposed edges. The 7/8 inch width matches well with many panel sizes, giving a practical balance between coverage and trimming time. Because the veneer is finger jointed and laminated to a continuous fleece membrane, long cabinet runs, tall closets, or extended shelving can be edged with fewer seams along the length. The continuous construction is especially useful for automated or semi-automated edgebanders that benefit from steady, uninterrupted feeding. Since the veneer is unfinished, it adapts to projects that require either clear-coat presentation of mahogany or custom stain work to align with existing interiors.
The natural grade "A" real wood veneer provides a stable starting point for consistent color and grain, which simplifies layout decisions when matching edges to visible faces. The 0.5 mm thickness helps the banding respond predictably to trimming knives and sanding blocks, which supports tight joints without heavy profiling at the edge. Expertly matched and sanded 220 grit veneer limits surface irregularities before finishing, reducing the chance of uneven stain absorption along the edge. The undetectable finger joints and continuous fleece membrane construction reduce visible breaks in the veneer run, which helps maintain a uniform appearance across a bank of doors or shelves. With seven available widths from 5/8 inch to 1-1/4 inch, shops can standardize on the same mahogany look while selecting widths that best match different panel dimensions and trimming allowances.
This mahogany edgebanding uses natural grade "A" real wood veneer, so finished edges present true mahogany grain and tone alongside matching wood components.
The veneer is 0.5 mm thick, giving a low-profile wood edge that trims and sands flush without adding noticeable bulk at cabinet or furniture edges.
This mahogany edgebanding is 7/8 inch wide and supplied as 500 linear feet per roll, which supports longer runs on cabinets, shelves, and casework.
The mahogany edgebanding is unfinished, so you can apply stains or clear finishes that match surrounding components and shop finishing systems.
This mahogany edgebanding is unglued with a fleeceback, letting you choose adhesive types suited to your edgebander and substrate requirements.
The veneer is expertly matched and sanded to 220 grit, providing a smooth surface that transitions quickly to finishing with minimal additional sanding.
Choosing this unfinished, unglued Edgemate mahogany edgebanding real wood fleeceback lets you align edge work with your existing adhesives, equipment, and finish systems. The 0.5 mm, 7/8 inch natural grade "A" veneer, supplied in 500-foot rolls, supports efficient production runs where consistent mahogany color, grain, and edge trimming performance matter from part to part.
Sold In: 500 Lineal Ft
