Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Birch edgebanding real wood fleeceback gives you natural grade A real wood veneer on your panel edges, so cabinet and furniture projects keep a consistent birch look from face to edge. The veneer is 0.5 mm thick, which provides a true wood edge without adding excessive bulk, helping panels stay close to nominal thickness for hinges, slides, and joinery. This edgebanding is unfinished and unglued, letting you use your preferred adhesive and finish system to match existing shop standards or field conditions. The veneer is expertly matched and sanded to 220 grit, which readies it for finishing and helps reduce leveling work after application. The product is undetectable finger jointed and laminated to a continuous fleece membrane, creating long runs that stay stable in automatic feed equipment while maintaining an even appearance along the length.
The 0.5 mm thick veneer on this birch edge banding helps panels stay close to their specified thickness after application, which supports predictable fits in cabinet openings and hardware clearances. The 7/8 inch width provides coverage for typical panel thicknesses while leaving enough overhang for trimming flush after the banding is applied. Because the veneer is laminated to a continuous fleece membrane, the strip remains supported during feeding and trimming, which is useful when running multiple passes in automatic edgebanding equipment. The unfinished and unglued format works well in workflows where adhesives and finishes are selected to match existing cabinet lines, since you can align bond strength and finish sheen with surrounding components.
This Edgemate birch edgebanding real wood fleeceback is a fit for edging birch-faced panels where natural grade A real wood veneer is required on visible edges. The 7/8 inch width suits many cabinet and casework panels, giving coverage for common panel thicknesses and allowing a small amount of trim margin. Because the veneer is laminated to a continuous fleece membrane, it works well in runs that benefit from steady feeding, such as cabinet sides, shelves, and tall panels in production settings. The undetectable finger joints help maintain an even visual line on long edges, which matters on tall pantry cabinets, closet panels, or large furniture sides where any joint would otherwise stand out.
The 0.5 mm veneer thickness provides a balance between a true wood edge and efficient trimming, which helps keep cut quality consistent while avoiding overly delicate edges. Veneer sanded to 220 grit supports predictable finishing, since stain or clear finishes lay down on a uniformly prepared surface that needs minimal additional sanding. The unfinished and unglued design lets this birch edgebanding tie directly into existing adhesive and finish systems, supporting repeatable cure behavior and color matching from project to project. Undetectable finger jointing and expert veneer matching help reduce touch-up and sorting during assembly, because the grain transitions are designed to stay visually even along the length of the roll. The continuous fleece backing stabilizes the strip in automatic feed equipment, which supports smoother trimming passes and helps maintain edge quality across an entire 500 foot roll.
This birch edgebanding has a veneer thickness of 0.5 mm, which provides a true wood edge while keeping overall panel thickness close to nominal dimensions for joinery and hardware fit.
This specific Edgemate birch edgebanding is 7/8 inch wide, giving coverage for common panel thicknesses with extra material for clean trimming after application.
The edgebanding uses natural grade A real wood veneer, providing a birch surface suitable for visible cabinet and furniture edges that need to match birch-faced panels.
The veneer is laminated to a continuous fleece membrane, giving backing support that helps the strip run smoothly and stay stable in automatic edgebanding setups.
This birch edgebanding is unfinished and unglued, so you can apply your own adhesive and finishing system to align with existing shop standards.
The veneer is undetectable finger jointed and expertly matched, which keeps grain transitions discreet along long edges for a more continuous appearance.
This Edgemate birch edgebanding real wood fleeceback, 0.5 mm thick and 7/8 inch wide, combines natural grade A real wood veneer with a continuous fleece membrane backing for stable feeding. The unfinished and unglued construction lets you align adhesive and finishing choices with your shop standards. With veneer sanded to 220 grit and undetectable finger joints, this 500 linear foot roll supports longer runs where consistent birch edge appearance and efficient processing matter. Use this roll when a continuous birch edge is needed across cabinets, furniture, or built-ins using birch-faced panels.
Sold In: 500 Lineal Ft
