
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Plastic sliding door track from Knape and Vogt gives you a matched upper and lower guide set for straight-line movement on sliding door jobs. This 1/2 inch x 72 inch upper/lower track set in tan finish provides a consistent guiding surface along a 6-foot opening, which helps doors travel in a controlled path. The tan color runs through the plastic tracks, so the guiding surfaces visually blend with similar finishes on casework and panels. As part of Knape and Vogt sliding door hardware, this set is built as a mated pair of guides, so the top and bottom pieces work together to keep door edges aligned in the opening. The 72 inch length suits taller cabinets, closets, or wider openings where a continuous guide is needed across the full span.
This upper/lower track set is part of Knape and Vogt sliding door hardware, so each piece is shaped to work as a guided pair for door panels. The 72 inch length lets you run both the upper guide and lower track across the opening without splicing, which helps keep alignment straight from side to side. The 1/2 inch sizing in the SAP description ties the track to door thickness options in the wider line, helping you assign it to doors in that build range. With both tracks sharing the same tan plastic material, the top and bottom guiding points present a single uniform look along the inside of the cabinet or enclosure.
This 1/2 inch x 72 inch upper/lower track set in tan finish serves as the guiding base for sliding doors in woodworking and built-in projects. The top guide holds the door edge at the head of the opening while the lower track supports the opposite edge at the sill line, so the panels stay captured between the two rails during use. Because both pieces are part of the same Knape and Vogt sliding door hardware line, their profiles and contact points are coordinated to work as a system. The 6-foot length gives you flexibility for larger cabinets or wall runs, where a full-span guide improves panel tracking from one side of the unit to the other without mid-run changes.
The tan plastic construction on both the upper guide and lower track provides a continuous molded surface for door movement, which supports predictable sliding each time the doors are opened or closed. The 1/2 inch sizing noted in the SAP description anchors this track set within Knape and Vogt offerings for specific door thicknesses, so it can be applied consistently wherever that door build is used across a project run. At 72 inches long, the track set lets installers align doors using a single reference piece at the top and bottom of the opening, rather than multiple shorter runs. Because the tracks come from the same manufacturer part number P2421 TAN 72, replacements can be identified precisely by that code when matching existing installations or planning repeat jobs.
The 1/2 inch sizing in the SAP description ties this track set to door thickness options in that range, which helps align the guides with doors built to the same dimension.
The Knape and Vogt P2421 TAN 72 track set is 72 inches long, allowing a continuous run across wider or taller sliding door openings without mid-span joints.
The tan plastic material forms a uniform molded guiding surface that blends with similar finishes and supports smooth door travel in typical indoor woodworking environments.
The upper/lower track set design pairs one upper guide with one lower track so both door edges are guided together, promoting straight, repeatable sliding along the opening.
The P2421 TAN 72 part number identifies this specific tan, 72 inch Knape and Vogt sliding door track set, helping match or reorder the same configuration across projects.
A 72 inch sliding door track is suited to larger cabinets, closets, or built-in openings where a full-length top and bottom guide support panel movement across the span.
This 1/2 inch x 72 inch upper/lower track set in tan finish from Knape and Vogt gives you a coordinated sliding door guide solution built around the P2421 TAN 72 specification. The matched plastic upper and lower tracks provide a continuous, tan-colored guiding surface along a 6-foot opening, tying door movement to a single aligned pair of rails. For sliding door work that calls for this size, color, and length, this track set offers a clearly defined option that can be specified or repeated by part number on future jobs.
Sold In: 1 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Set | KVP2413T-48 Mfr# P2413 TAN 48 | 48" Upper/Lower Track Set for 1/8" Thick Door, Tan Finish | ||||
Sold in: 1 Set | KVP2413T-72 Mfr# P2413 TAN 72 | 72" Upper/Lower Track Set for 1/8" Thick Door, Tan Finish | ||||
Sold in: 1 Set | KVP2417T-48 Mfr# P2417 TAN 48 | 1/4" x 48" Upper/Lower Track Set, Tan Finish | ||||
Sold in: 1 Set | KVP2419T-48 Mfr# P2419 TAN 48 | 48" Upper/Lower Track Set for 3/4" Thick Door, Tan Finish | ||||
Sold in: 1 Set | KVP2419T-72 Mfr# P2419 TAN 72 | 72" Upper/Lower Track Set for 3/4" Thick Door, Tan Finish | ||||
Sold in: 1 Set | KVP2421T-48 Mfr# P2421 TAN 48 | 48" Upper/Lower Track Set for 1/2" Thick Door, Tan Finish |