1/4" x 48" Upper/Lower Track Set, Tan Finish

1/4 x 48 Upper Lower Track Set For Sliding Doors

1/4 x 48 upper lower track set from Knape and Vogt is a plastic sliding door hardware solution in a tan color for building or millwork projects that call for coordinated upper and lower door guidance. The track set is part of the Knape and Vogt sliding door hardware line, so it fits naturally into projects that already use this builders hardware category. The manufacturer part number P2417 TAN 48 identifies a 4 foot long plastic track sized for 1/4 inch door thickness, which helps keep material selection consistent on multi-opening runs. Because the track is made of plastic with a tan finish, it visually blends with light casework finishes where exposed metal would be more noticeable. Being sold as a set connects one upper guide piece with one lower track piece, which gives a matched running surface for smoother panel travel across the opening.

Sliding Door Track Details That Support Daily Use

• The plastic track in tan color provides a neutral appearance, which helps sliding door openings align with light-toned cabinetry and casework without drawing extra attention to the hardware line.
• Available in a 48 inch length, the P2417 TAN 48 track set suits standard cabinet or closet openings, which reduces field cutting on common spans and simplifies layout on repetitive installations.
• All tracks in this series are made of plastic, which creates a consistent bearing surface along the full opening and supports predictable movement of the sliding door panels during regular operation.
• The track system is part of the sliding door hardware category, which helps keep door guidance and alignment tasks grouped under familiar builders hardware during project planning and ordering.
• The Knape and Vogt branding on this track set connects it to an established sliding door hardware line, which helps installers align this part with other components specified under the same manufacturer.

Track Set Sizing And Door Thickness Application

The plastic track 4 x1 4 tan design is sized for 1/4 inch thick doors, so this particular P2417 TAN 48 model fits projects that use lighter panels instead of thicker slab doors. The 4 foot length lets installers span many cabinet or small closet openings in a single piece, which can reduce joint lines that might interrupt smooth travel. Because Knape and Vogt also offers complete installation kits for 1/8, 1/4, 1/2, or 3/4 inch thick doors, this specific 1/4 inch track set can be matched with other thickness options in the same project where multiple door constructions are present. The tan plastic material keeps the running surface consistent above and below the door, which supports even movement along the entire track run.

Using This Sliding Door Track Set In Projects

Where This Knape And Vogt Track Set Fits

This plastic sliding door track set is part of the builders hardware and sliding door hardware categories, so it fits into projects where doors need guided motion rather than hinged swing. The 1/4 inch door thickness rating focuses this P2417 TAN 48 part on lighter door panels, which are common in cabinet, closet, or casework applications that rely on thin substrates. The 48 inch length makes the set suitable for many single-opening spans in residential or commercial millwork where a 4 foot track covers the full width. Because the track and guide are both plastic in a tan color, visible runs at the top and bottom of the opening maintain a consistent look, which supports cabinetry designs that favor concealed or low-contrast hardware lines.

Details That Support Consistent Sliding Door Results

The plastic sliding door track set using one upper guide and one lower track creates a defined path above and below the panel, which helps doors stay aligned as they move. Matching plastic material for both pieces provides a uniform bearing surface, which supports repeatable slide performance across multiple openings that use the same part number. The 1/4 inch thickness focus of this P2417 TAN 48 model lets installers keep reveal and overlap details consistent wherever that door thickness is specified. Because all tracks in this line are plastic with a tan color, projects that use several track lengths or door thickness kits can maintain the same visual tone. Having the track set sold in both broken and full box quantities allows shops to match order sizes to project scope, which supports material staging from small runs to larger, repetitive installations.

Common Questions About P2417 TAN 48 Track Sets

Selecting This Track Set For Sliding Door Runs

The 1/4 x 48 upper lower track set P2417 TAN 48 from Knape and Vogt gives installers a defined plastic sliding door hardware option for 1/4 inch thick doors. The tan plastic construction and matched upper and lower pieces support consistent appearance and motion across cabinet, closet, or casework openings that share this track size. For projects already using Knape and Vogt sliding door hardware, choosing this specific part number keeps the track profile, color, and door thickness rating aligned across the job.