Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
1/4 x 72 upper lower track set describes a Knape and Vogt plastic track pair designed for sliding door hardware work on jobs using 1/4 inch thick doors. The set uses a matching upper guide and lower track, so the door is guided from the top while running on the bottom, which helps the panel stay in line across the opening. All tracks are made of plastic in a tan color, so the guiding surfaces are consistent and the finish blends with many cabinet and closet interiors where a neutral track is preferred. The 72 inch length suits wider openings or tall casework runs where a full 6 foot track is required without splicing, which can reduce layout steps when planning sliding door hardware runs.
The PLASTIC TRACK,6'X1/4'TAN description shows this Knape and Vogt set is a 6 foot, 1/4 inch track system in tan, so it covers a 72 inch span using panels sized for that channel. Being a defined sliding door hardware product means it is meant for lateral door movement, so the door edges travel inside the guide rather than swinging out, which is useful where clear floor space is tight. The tan finish on the plastic tracks keeps the visual line soft across the cabinet or opening, which can help the track recess into the background while the doors remain the focus of the finished work.
This Knape and Vogt sliding door track uses a matching upper guide and lower track, so it fits applications where the door must be both supported at the base and held in position at the top, such as cabinet runs or built-in storage openings. As part of the sliding door hardware class, it suits projects where a sideways-moving panel is preferable, helping doors travel along the case rather than projecting into walkways. The tan plastic material lets the track blend with warm-toned interiors or painted work where a neutral channel is desired, so the hardware line does not dominate the finished appearance. The 72 inch length helps when a single continuous track is needed across a wider cabinet, allowing the installer to run one piece instead of aligning shorter sections.
The plastic track 6 x 1/4 tan configuration ties track size and color directly to the SAP description, so the installer can match the 6 foot length and 1/4 inch door thickness when planning multiple similar openings, which supports repeatable layouts across a job. Having a defined hardware set with one upper guide and one lower track means the relationship between the two guiding surfaces stays consistent from project to project, which helps doors track smoothly when the same parts are used again. The availability of kits for 1/8, 1/4, 1/2, or 3/4 inch doors keeps the product family aligned to common panel thicknesses, so a shop can standardize on a sliding door approach while adjusting only for material thickness. The Knape and Vogt manufacturer part number P2417 TAN 72 clearly ties this specific 6 foot, tan, 1/4 inch configuration to ordering and job documentation, which helps reduce selection errors when scheduling repeat work or reordering for additional similar cabinets.
The 1/4 x 72 upper lower track set is part of a system with kits for 1/8, 1/4, 1/2, or 3/4 inch thick doors, so this configuration is geared to 1/4 inch doors in that family.
The PLASTIC TRACK,6'X1/4'TAN description states a 6 foot length, so the track spans 72 inches, which suits wider cabinet or opening widths in one continuous run.
The hardware set has a matching one piece upper guide and one piece lower track, giving both top guidance and bottom running surface for a sliding door panel.
All tracks are made of plastic with a tan color, so the guiding surfaces are consistent and the visual line stays neutral inside many cabinet or closet installations.
The product is classified as sliding door hardware, so it is designed for doors that move laterally, which helps control door travel along cabinets or similar openings.
The Knape and Vogt part number P2417 TAN 72 identifies a tan plastic track set in a 6 foot, 1/4 inch configuration, tying ordering details directly to this specific track size.
The 1/4 x 72 upper lower track set from Knape and Vogt pairs a tan plastic upper guide with a matching lower track for 1/4 inch sliding door work over a 6 foot span. As a defined sliding door hardware product, it offers a straightforward channel solution when a 72 inch run and neutral color are needed on a cabinet or similar opening. Use the P2417 TAN 72 identification when adding this track set to project plans so the door thickness and track length align with the intended sliding installation.
Sold In: 1 Set
