Lid Supports and Up Stays (Chest Style) Spring Loaded Lift Mechanisms 55 lb to 65 lb, Right Hand

Lid Support 55-65 Ft Lb For Heavy Lids

The Carlson Capitol Mfg. Company lid supports and up stays (chest style) use a spring loaded lift mechanism rated for 55 lb to 65 lb, so they handle heavier cabinet or chest lids in that torque range without uncontrolled dropping. This right hand unit mounts inside the cabinet opening, which keeps the mechanism protected and out of the way of the usable interior space during everyday use. An exclusive cam action holds the lid in any position, giving installers and users smooth, controlled movement instead of a simple open-or-closed action. That cam-based holding action lets the lid stay where it is set, which helps during loading, unloading, or working under an open top without fighting lid drift. As part of the 702 RH/LH Series, this model is designed to be mounted to the right side of the cabinet, which supports consistent layouts when matching an existing design or drawing.

Key Lid Support Details For Work Use

• The torque rating is defined as lid height times lid weight times one-half per each unit, so installers can size the support properly for the specific lid geometry and weight when selecting between different tension ranges for similar mechanisms.
• The spring loaded design uses high quality springs that are available in different tensions for different lid sizes, which helps match lift assistance and holding strength to the actual project rather than relying on a one-range-fits-all mechanism.
• The support keeps heavy lids from slamming shut, so the spring and cam combination reduce sudden closing forces on the cabinet, hinges, and fingers during normal operation, especially on chests or top-opening cabinets.
• The mechanism holds the lid top open in any position, which supports partial access, staged opening, and fine positioning when working at a bench, storage chest, or equipment cabinet that needs variable opening angles during use.
• A solid brass enclosure slide is part of the construction, providing a controlled sliding interface that supports repeatable motion through the travel path as the lid is raised or lowered in regular daily operation.
• The cover brackets are riveted to the cam, creating a fixed relationship between these parts that helps keep the cam action consistent over time as the support cycles through repeated openings and closings.

Right Side Installation And Series Layout

This 702RH-BLACK lid support is designed specifically as a right hand unit, so it is mounted to the right side of the cabinet opening when facing the front. That handed design helps installers align the mechanism with the lid and cabinet geometry without guesswork about orientation. The 702 RH/LH Series is designed to be mounted to the left or right side of the cabinet, providing a matched family for side-mounted applications where one or both sides may use similar supports. In contrast, the 703 Series is designed to be mounted to the center of the cabinet, which distinguishes side-mount selection from center-mount layouts when planning the overall lift system configuration.

How This Carlson Lid Support Works In Practice

Where This Right Hand Lid Support Fits Best

This spring loaded lift mechanism rated for 55 lb to 65 lb fits applications where the lid torque falls within that range, such as heavier chests, storage benches, or work-surface lids that need controlled support. Because it is for mounting inside of the cabinet opening, the support fits into side walls of casework where interior mounting space is available, keeping the mechanism contained within the cabinet footprint. The 702 RH/LH Series design for left or right side mounting supports layouts that use a single right hand support on one side or a mirrored arrangement with a left hand unit on the opposite side from the same series. The right hand orientation of this 702RH-BLACK model suits cabinet builds where other hardware or clearances dictate that the active support be placed on the right interior wall for best mechanical alignment.

Cam Action, Torque Range, And Finish In Use

The exclusive cam action that holds the lid in any position gives this Carlson Capitol lid support a controlled motion profile, turning the spring energy and cam geometry into stable holding throughout the travel instead of a single detent. That behavior matters when lids need to stay partially open for sorting parts, accessing tools, or staging materials, because the cam holds the torque rather than relying on friction alone. The defined torque rating formula - lid height times lid weight times one-half per each unit - provides a direct way to relate the 55 ft lb to 65 ft lb range to an actual lid, so installers can match this right hand support to lids whose calculated torque value falls between those numbers. Its solid brass enclosure slide contributes a robust sliding surface that guides the mechanism through repeated cycles, supporting long-term movement without binding as the springs do their work. The finish is Statuary Bronze/Black Oxide color, which presents a darker appearance that coordinates with darker interior hardware schemes while also visually receding inside the cabinet opening so attention remains on the exterior surfaces.

Common Questions About 702RH-BLACK Lid Support

Select This Lid Support For Matched Torque

The Carlson Capitol Mfg. Company 702RH-BLACK lid support uses a spring loaded lift mechanism rated for 55 lb to 65 lb, so it matches lids whose torque falls into that working range. Its right hand design for mounting inside of the cabinet opening on the right side fits projects built around side-mounted supports rather than center-mount systems. With an exclusive cam action that holds the lid top open in any position and a solid brass enclosure slide guiding movement, this support is built for controlled, repeatable lid operation. Choose this statuary bronze/black oxide color support when a side-mounted, cam-action lid stay is needed for heavier lids in the 55 to 65 foot pound torque bracket.