Lid support 65-95 ft lb describes this Carlson Capitol Mfg. Company spring loaded lift mechanism designed for chest style lids that need controlled movement. The torque range of 65 to 95 foot pounds supports heavier lid heights and weights, which matters when you are managing substantial tops on work surfaces or storage chests. The unit is designed for mounting inside of cabinet opening, so the mechanism stays within the case, helping keep exterior lines clean while still controlling lid motion. An exclusive cam action holds the lid in any position, which allows you to set the opening angle where you need it for access or workflow without the lid drifting. High quality springs are available in different tensions for different lid sizes, giving you a way to select a rating that matches the lid torque for balanced lift and controlled closing. The 702 RH/LH Series is designed to be mounted to left or right side of cabinet, and this right hand model fits that side-based layout.
This spring loaded lift mechanism is for mounting inside of cabinet opening, so installation focuses on aligning the right hand support along the cabinet side where the lid pivots. The 702 RH/LH Series is designed to be mounted to left or right side of cabinet, which means this 702RH-YELLOW part integrates into a side-mount layout rather than a center mount configuration. High quality springs available in different tensions for different lid sizes tie the lift feel directly to the torque created by lid height and lid weight, giving you a way to select the listed 65-95 foot pound range for heavier applications. The torque rating formula, lid height x lid weight x 1/2 (per each, not pair), defines how the rating relates to the physical lid, so one right hand unit in this range is sized for that calculated load on its side of the opening.
This Carlson Capitol lid support is categorized under Lift Systems, Lid Supports and Stays, and specifically Lid Supports, which places it in work surface and table applications where lids or tops pivot open. It is described as a lid support and up stay (chest style), so it suits chest-style lids on cabinets or storage units where the lid swings upward and needs controlled holding at various angles. The design is for mounting inside of cabinet opening, positioning the 702RH-YELLOW support on the right side wall of the case so the mechanism tracks with the lid as it opens. The 65-95 foot pound torque rating addresses heavier lids, meaning taller or denser tops fall into the intended range when the torque is calculated with lid height x lid weight x 1/2 (per each, not pair). The 702 RH/LH Series is designed to be mounted to left or right side of cabinet, aligning this right hand part with layouts that carry the lifting hardware along the right interior face.
The spring loaded lift mechanism creates an active lifting force, so once sized to the 65-95 foot pound window, it works with the lid torque instead of simply resisting motion. An exclusive cam action holds the lid in any position, translating cam geometry into friction and leverage that resist unintended movement, which supports repeatable stopping points during regular use. Features a solid brass enclosure slide, so the moving slide component is brass, bringing metal-on-metal guidance to the motion path, which promotes smooth tracking over the life of the support. Cover brackets riveted to cam secure the brackets directly to the cam element, giving a fixed relationship between the lid connection and the cam action that governs holding and release. High quality springs available in different tensions for different lid sizes means the product line offers tuned responses to varied lid torque requirements, and this specific 65-95 foot pound version targets higher loads. The finish is stated as Statuary Bronze/Black Oxide color, which gives the hardware a dark, muted appearance that helps it visually blend into darker cabinet interiors while still providing the mechanical control. The 702RH-YELLOW designation ties to that right hand 65-95 foot pound configuration within the 702 RH/LH Series.
The 702RH-YELLOW support is described as a lid support and up stay (chest style), so it is intended for chest-style lids that pivot upward on cabinets or storage units.
The lid support is for mounting inside of cabinet opening, so it is positioned on the interior, with the 702RH-YELLOW right hand unit mounted along the right side of the case.
The torque rating uses lid height x lid weight x 1/2 (per each, not pair). Lids whose calculated torque falls between 65 and 95 foot pounds match the intended working range of this support.
The lid support features an exclusive cam action that holds the lid in any position, so the cam resists movement and lets the lid stay at partial or full opening angles during use.
The lid stay uses high quality springs available in different tensions for different lid sizes, so the spring force can be matched to the lid torque for effective lift and controlled closing.
The lid support finish is Statuary Bronze/Black Oxide color, so the hardware presents a dark toned appearance that tends to recede visually inside many cabinet interiors.
The Carlson Capitol Mfg. Company 702RH-YELLOW lid support combines a spring loaded lift mechanism with an exclusive cam action to handle heavier chest style lids. The 65-95 foot pound torque rating ties directly to lid height and lid weight, so lids in that calculated range benefit from assisted lift and controlled closing. Mounting inside of cabinet opening keeps this right hand support working along the cabinet side while preserving the exterior look. For cabinet and woodworking projects that require a chest-style lid to stay open at various positions without slamming shut, this lid support provides a defined mechanical solution based on its rated torque range and side-mount design.
Sold In: 1 Each
