Hickory Hardware Eclipse Chromulux 1-1/4" (32 mm) Diameter Knob, P209-CLX

Hickory Hardware Eclipse Knob For Cabinet Fronts

Hickory Hardware Eclipse knob from the Eclipse collection gives cabinet doors and drawers a defined 1-1/4 inch diameter grip point, helping hands catch the pull quickly on every open. The zinc die cast material forms a solid, consistent knob body, supporting repeatable feel across a full kitchen or shop run. The Chromulux finish provides a specific visual look, letting installers coordinate this knob with other Chromulux-finished hardware in a project. A 1 inch projection sets the working distance off the face of the cabinet, helping fingers clear the edge without crowding the front. The 3/8 inch base diameter creates a compact footprint against the door or drawer, which works well when layout space between knobs is tight. With a brand lineage under Belwith Keeler and the Eclipse name, this knob ties into a defined decorative hardware line for repeat projects.

Key Eclipse Chromulux Knob Details In Use

• The 1-1/4 inch (32 mm) diameter head creates a clear pull area, which gives consistent finger contact when opening doors or drawers in daily use.
• The 1 inch projection sets the knob out from the cabinet face, helping fingers wrap behind the edge while keeping the knob close enough for tight walkway or galley layouts.
• The 3/8 inch base diameter keeps the footprint compact, which helps when centering the knob on narrow rails or stiles without crowding neighboring hardware.
• The Chromulux finish delivers a defined surface appearance, allowing this knob to visually coordinate with other Chromulux components in the same room or bank of cabinets.
• The zinc die cast construction forms a uniform knob body, supporting consistent feel and appearance across multiple units on doors, drawers, or built-ins.

Cabinet Knob Fit, Size, And Mounting Details

This Eclipse collection knob uses a 1-1/4 inch diameter head and 1 inch projection, so it occupies a modest space off the front of the cabinet while still giving a full grip point. The 3/8 inch base diameter keeps the contact point with the door or drawer small, which is helpful when laying out hardware on narrow frame members. The knob uses an 8-32 thread screw interface, matching a widely used cabinet hardware thread standard to integrate into common shop drilling and tapping patterns. With its Chromulux finish and Eclipse styling, this knob aligns with decorative hardware choices where a specific coordinated look is required from piece to piece.

Using The Eclipse Chromulux Knob In Projects

Where The 1-1/4 Inch Knob Works Best

The Hickory Hardware Eclipse Series Chromulux 1-1/4 inch diameter knob fits cabinet doors and drawers that benefit from a compact but full-coverage pull point. Its 32 mm diameter size balances well on many face frame and frameless door styles, giving proportional scale on both small and medium fronts. The 1 inch projection spaces the hand slightly off the cabinet surface, which suits kitchen, bath, and built-in storage where traffic passes close to the fronts. A 3/8 inch base diameter supports use on narrower rails or stiles, because the contact circle stays inside tight framing dimensions. The Chromulux finish works in designs calling for that specific surface look, so the knob can be repeated across a room while maintaining the same visual tone.

Details That Support Consistent Hardware Results

The zinc die cast material of this Eclipse collection knob provides a uniform casting, which supports consistent sizing and appearance from knob to knob across a job. A defined 1-1/4 inch diameter lets installers rely on predictable clearances when laying out hardware patterns or drilling jigs. The 1 inch projection gives a known stand-off distance from the cabinet face, assisting with plans that consider door swing past adjacent panels or appliances. The 3/8 inch base diameter focuses load transfer into a small area, which can help align with standard boring patterns on rails and center panels. Threading for an 8-32 screw ties into a common cabinet hardware fastener standard, integrating with existing shop tooling and established hole sizes. Together with the Chromulux finish and Eclipse naming, these details help support repeatable selections when matching existing hardware or building coordinated runs.

Common Questions About The Eclipse Chromulux Knob

Select This Eclipse Knob For Coordinated Projects

The Hickory Hardware Eclipse Series Chromulux 1-1/4 inch diameter knob combines a defined 1 inch projection, 3/8 inch base, and zinc die cast construction for consistent cabinet hardware results. The Chromulux finish and Eclipse collection identity allow this knob to align with existing or planned Chromulux hardware runs. For projects where a compact 32 mm pull and 8-32 threaded interface suit the layout, this P209-CLX knob from Belwith Keeler provides a clear, repeatable choice.