Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PRO Value Wire Pull Series 3-3/4 identifies this pull as a wire-style handle sized for a 3-3/4 inch center to center layout, so it lines up with standard drilling patterns on many cabinet and drawer fronts. The Pro Value Series brand and Handles and Pulls product class position it as decorative hardware for cabinetry, giving installers a straightforward option when setting up or refreshing kitchens, baths, and casework. The stainless steel material described in the Web Description provides a metal construction, which supports solid feel in daily operation on doors and drawers. A stainless steel finish on the pull surface pairs cleanly with many hinge and appliance finishes, helping jobs maintain a consistent visual line across a run of fronts. The stated length of 4-1/8 inches gives a little overhang beyond the 3-3/4 inch hole spread, which offers useful grip area when pulling heavier drawers.
The Center to Center dimension of 3-3/4 inches, given with its 96 mm metric value, lets installers lay out mounting holes with either imperial or metric jigs, reducing layout confusion on mixed-measure jobs. The Web Description length of 4-1/8 inches indicates how much linear space the pull occupies on a rail or stile, so spacing between adjacent handles can be planned visually and functionally. A projection of 1-1/4 inches sets how far the pull stands off the surface, which influences both hand clearance and how far fronts can swing past adjacent obstacles. The width of 5/16 inches defines the wire thickness, which affects the feel between fingers when grasping the pull on narrow drawer fronts or small doors.
The Category listing as Decorative Hardware & Moldings|Handles and Pulls identifies this item as a cabinet handle, so it suits doors and drawers where a wire-style pull is preferred. The PRO Value Series product class places it among decorative pulls for cabinetry, making it suitable for both shop-built and on-site cabinet work. The Center to Center measurement of 3-3/4 inches, matching the 96 mm value, lines up with a widely used pattern, so it works on fronts drilled for that spacing. The overall length of 4-1/8 inches from the Web Description lets the pull sit comfortably on standard rail heights, giving enough bar length for a full hand grasp. The stainless steel finish coordinates visually with many hinge and appliance finishes, supporting consistent styling across upper cabinets, base cabinets, and drawer stacks.
The specified 3-3/4 inch center to center spacing gives a clear target for boring operations, which helps maintain alignment from one cabinet front to the next along a run. The listed projection of 1-1/4 inches defines the standoff from the door or drawer surface, which contributes to predictable clearance for fingers and reduces interference with surrounding trim when doors are opened. The 5/16 inch width in the Web Description identifies the bar thickness, which informs jig placement when aligning pulls parallel to edges. The stainless steel material construction provides a consistent substrate, which allows installers to expect uniform seating against the cabinet face when tightening fasteners. The manufacturer part number K271-96SS and SAP Description PULL, 96MM STAINLS STEEL give clear identification in ordering and job paperwork, which supports accurate repeat ordering across multiple projects.
The K271-96SS is a Pro Value Series handle in the Handles and Pulls product class, so it functions as a decorative wire-style pull for cabinet doors and drawers.
The pull has a 3-3/4 inch center to center dimension, also listed as 96 mm, so drilling layouts can follow either imperial or metric scales on jigs.
The Web Description lists a 4-1/8 inch length, which determines how much linear space the handle occupies on a cabinet rail or drawer front.
The Web Description specifies a 1-1/4 inch projection, setting the distance from the door or drawer face to the front of the pull for hand clearance.
The Web Description states stainless steel material with a stainless steel finish, providing a consistent metal look across the visible hardware surface.
The Web Description lists a screw size of 8-32 x 1 inch, which indicates the thread and length used to fasten the pull through cabinet fronts.
The PRO Value Wire Pull Series 3-3/4 designation, combined with the 3-3/4 inch (96 mm) center to center measurement, defines this pull as a fit for layouts using that common spacing. The Web Description details of stainless steel material, stainless steel finish, 4-1/8 inch length, 1-1/4 inch projection, and 5/16 inch width describe how it will sit and feel on cabinet fronts. The Manufacturer Part # K271-96SS and SAP Description PULL, 96MM STAINLS STEEL match the product URL from Wurth Baer Supply, supporting straightforward specification when adding this pull to cabinet runs on upcoming projects.
Sold In: 1 Each
