Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3M 340D 100 Grit 4 x 24 Portable Sanding Belt is a general purpose abrasive belt designed for portable sanders, so crews can handle routine stock removal and surface prep with one dependable belt size. The aluminum oxide abrasive on X-weight cloth combines a sharp cutting mineral with a durable backing, helping the belt stay effective under consistent, industrial-duty use. The 100 grit rating gives a balanced cut that can level surfaces while still leaving a workable finish for subsequent steps on wood or similar materials. This 340D version is an open coat belt, so spacing between abrasive grains helps reduce loading during sanding, supporting more consistent cutting action across the workpiece. As part of the 3M 340D and 341D general purpose line, this belt fits into everyday shop workflows where repeatable results and predictable performance are critical.
This 3M 340D 100 Grit 4 x 24 Portable Sanding Belt is sized for sanders that accept a 4 inch by 24 inch belt, so it drops into common portable belt sanders built around that footprint. The X-weight cloth backing supports proper belt tracking and tensioning on those tools, helping the belt remain stable during extended passes. Because the belt uses an open coat aluminum oxide construction, it is suited to sanding conditions where dust generation is significant, supporting a more predictable cut across the length of the belt. The 100 grit level situates this belt in a medium cutting range, which can streamline setup when the same belt must handle both initial smoothing and follow-up refinement steps in a typical industrial workflow.
The 4 x 24 size of this 3M 340D sanding belt matches portable sanders built around a 4 inch wide platen and a 24 inch belt loop, so operators can cover a relatively wide path in one pass. That width helps flatten or smooth larger surfaces with fewer tracking lines, which is useful on workpieces such as broad panels or long edges. The X-weight cloth backing provides the strength needed to stay intact on these larger sweeps, helping the belt ride evenly over joints or slight surface transitions. As part of the general purpose portable sanding belt family, this size works well when a single sander is used frequently across repetitive production or installation tasks that call for the same belt dimensions.
The aluminum oxide on X-weight cloth construction combines a tough abrasive mineral with a sturdy cloth, so the belt can maintain its cutting action over multiple workpieces in industrial or occupational settings. The 340D open coat design spaces the abrasive grains so debris has room to clear, reducing loading that could otherwise glaze the belt and slow stock removal. That characteristic helps hold a good cut as the job progresses, especially on materials that tend to generate fine dust. At 100 grit, this belt sits in the mid-range of the 340D offering, between 50 and 120 grit, which positions it for general purpose tasks where a balance of cutting speed and finish uniformity is preferred on everyday sanding runs.
This 3M 340D 100 Grit 4 x 24 Portable Sanding Belt uses aluminum oxide on an X-weight cloth backing, providing a sharp cutting surface supported by a durable cloth base for industrial sanding tasks.
The 340D open coat design spaces the abrasive grains, which reduces loading and helps maintain a good cut during longer sanding passes where dust generation is high.
The 100 grit level on this belt places it in a medium range, supporting general purpose sanding where a combination of stock removal and a workable finish is useful in everyday shop work.
The 4 x 24 dimension is intended for portable sanders designed around that belt length and width, so tools with a 4 inch wide platen and matching belt path use this size.
Within this family, 340D is an open coat belt that provides a good cut with less loading, while 341D is a closed coat belt that provides a consistent finish using a denser grain pattern.
In this line, 340D belts are available in 50 to 120 grit, and 341D belts are available in 24 to 120 grit, covering coarse through finer sanding stages.
The 3M 340D 100 Grit 4 x 24 Portable Sanding Belt is positioned as an excellent all-around abrasive belt for everyday use, aligning with shops that value a single, repeatable belt choice. The aluminum oxide on X-weight cloth construction, combined with the open coat 340D design, supports steady cutting with less loading across typical industrial or occupational sanding runs. The 4 x 24 size fits portable sanders built for that footprint, so crews can rely on this belt when a wider sanding path is needed on recurring jobs. For operations that prefer unified abrasives across tasks, this belt lets work flow consistently from one piece to the next.
Sold In: 10 Belt
