Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3M 340D 50 grit sanding belt is a 4 inch x 24 inch general purpose portable sanding belt built with aluminum oxide abrasive on an X-weight cloth backing. The aluminum oxide abrasive provides a consistent cutting action on everyday sanding jobs, which helps maintain predictable stock removal on repeated passes. The X-weight cloth backing supports the abrasive during portable sanding, so the belt tracks and holds up under the tension of handheld belt sanders. This 340D belt is an open coat design, so abrasive grains are spaced to allow room for swarf to clear, which reduces loading during use. The open coat construction helps the belt keep cutting instead of glazing over, which matters on jobs where you need to maintain cutting speed over longer runs. As part of the 3M 340D and 341D family of portable sanding belts, this belt fits into a proven general purpose belt line for everyday use in industrial and occupational environments.
This 3M 340D portable sanding belt is specified at 4 inches x 24 inches, which aligns with belt sanders designed around that belt length and width. Within the 340D line, grits are available from 50 to 120, so installers and shop crews can match belt aggressiveness to stock removal or finishing passes while staying within the same general purpose family. Within the companion 341D line, grits are available from 24 to 120, providing a broader range when heavier cut or finer finishing is needed with a closed coat construction. The combination of open coat 340D and closed coat 341D options lets a shop standardize on a single belt family for different stages of sanding, which can simplify ordering and inventory.
The 3M 340D and 341D general purpose portable sanding belts are part of the abrasives and abrasive belts category, so they are intended for sanding applications where a belt sander is preferred. The 4 inch x 24 inch size on this 340D belt fits portable sanding situations where a wider belt helps cover more surface area per pass, which is useful on larger workpieces. Because the 340D belt is open coat, it delivers a good cut with less loading, making it suitable for situations where material debris tends to build on the abrasive surface. The 341D belt in the same product family is a closed coat belt that provides a consistent finish, so it is used when the sanding step is focused more on finish uniformity than on clearing debris. Together, the 340D and 341D options support everyday use across general sanding tasks in industrial and occupational environments.
The aluminum oxide abrasive on these belts provides a general purpose cutting action, so crews can rely on one abrasive type across routine sanding jobs instead of jumping between different abrasive minerals. The X-weight cloth backing on the belts adds strength under belt tension, which helps the belts stay intact and track properly on portable sanders during repeated use. The open coat structure of the 340D belt reduces loading, which keeps the abrasive points more exposed so cutting action stays effective over longer sanding cycles. In contrast, the closed coat structure of the 341D belt places abrasive across the entire surface, which helps produce a more consistent finish where surface appearance is a priority. Both belts are described as excellent all-around abrasive belts for everyday use, so they are positioned for repeat tasks in shops and industrial settings where predictable performance is important. These belts are for industrial and occupational use only, so they are aligned with trained workplace users and processes.
The 3M 340D belt is specified at 4 inches x 24 inches, which matches portable belt sanders built for that belt width and length, helping it fit typical handheld sanding setups.
The belt uses aluminum oxide abrasive, which delivers a general purpose cut suited to everyday sanding tasks across a variety of routine shop and industrial applications.
The X-weight cloth backing supports the abrasive under belt tension, helping the belt track on the sander and withstand aggressive passes during portable sanding.
The 340D belt is open coat, providing a good cut with less loading, while the 341D belt is closed coat, providing a consistent finish where surface uniformity is important.
The 340D belts are available from 50 to 120 grit, and the 341D belts are available from 24 to 120 grit, allowing selection from more aggressive to finer sanding steps.
3M industrial and occupational products, including these belts, are intended, labeled, and packaged for trained industrial and occupational customers for workplace use.
The 3M 340D 50 grit 4 inch x 24 inch portable sanding belt combines aluminum oxide abrasive, X-weight cloth backing, and open coat construction to support everyday sanding in industrial and occupational settings. With 340D open coat and 341D closed coat options covering a wide grit range, a shop can align roughing, intermediate, and finish-oriented sanding within one belt family. Selecting this belt keeps the abrasive type, backing, and construction consistent across many tasks, which supports predictable sanding behavior on portable belt sanders.
Sold In: 5 Belt
