Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Strikes for Disc and Pin Tumbler Locks from CompX National provide the mating strike point for both disc and pin tumbler locks, so the lock bolt has a consistent surface to engage, which helps doors or drawers stay positively secured when locked. The bright brass construction gives these strikes a brass finished appearance, which coordinates with bright brass lock bodies and trim for a uniform look across cabinets or fixtures. The manufacturer part C2001-3 identifies this specific strike style, which helps match it to existing CompX National disc or pin tumbler lock layouts in the shop. As part of the strikes class within lock accessories, this component is intended for use wherever a compatible disc or pin tumbler lock is installed and requires a dedicated strike to complete the locking function.
This CompX National strike is furnished with screws to match the strike, so the fasteners coordinate with the bright brass finish and provide the attachment points needed to secure the strike where the lock bolt will land. That pairing lets installers mount the strike and lock in relation to each other without sourcing separate fasteners, which streamlines layout on cabinet doors, drawers, or panels. The 3/16" form noted in the description defines a specific formed profile dimension of the strike, which guides how it sits relative to the lock bolt and cabinet surface, helping set the engagement geometry for reliable lock operation after installation.
This strike for disc and pin tumbler locks serves as the fixed receiver surface opposite the lock body, so it belongs wherever a compatible CompX National disc or pin tumbler lock is mounted in a cabinet, drawer, or casework panel. As a lock accessory classified under strikes, it is part of the hardware system that completes the latch path, placing a defined metal contact for the lock bolt. The 3/16" form characteristic shapes how the strike stands off or nests against the mounting surface, which determines the clearance between the door or drawer and its frame when the lock is thrown. Using the C2001-3 part on projects that already specify CompX National lock bodies supports continuity across a job, because the same style of strike is repeated from opening to opening.
The bright brass finish on this strike lets installers align visible hardware with bright brass lock cylinders, so the lock front and its strike share a common appearance that reads as one coordinated set in finished millwork. Being an optional strike for both disc and pin tumbler locks, this part allows the same style of receiver to be used across those lock types, which simplifies hardware planning when a project mixes disc and pin tumbler mechanisms. Furnishing screws to match the strike keeps the fastening points visually tied into the bright brass surface, which matters on exposed door edges or cabinet interiors where hardware alignment and finish continuity are important. Because the strike is identified specifically as C2001-3, shops can reference that number on drawings or cut lists, which helps fabricators and installers pull the same strike pattern each time and repeat successful lock alignment from unit to unit.
The C2001-3 strike is described as optional for both disc and pin tumbler locks, so it is intended to partner with those lock styles in CompX National systems.
The bright brass finish lets the strike visually coordinate with bright brass locks and trim, which keeps exposed hardware looking uniform across cabinet doors and drawers.
The 3/16" form describes a specific formed profile dimension of the strike, which affects how it sits to meet the lock bolt and align clearances at the opening.
The C2001-3 designation uniquely identifies this CompX National strike, so using that number helps match new strikes to existing lock installations or job specs.
This strike is furnished with screws to match, so the fasteners blend with the bright brass surface and secure the strike without introducing a mismatched finish.
The product is sold in both broken and full box quantities with a discount on full boxes, which supports cost-effective purchasing for larger cabinet or fixture runs.
The CompX National C2001-3 strike in bright brass is an optional strike for both disc and pin tumbler locks, so it fits naturally into projects already using those lock families. Its 3/16" form and matching bright brass screws provide a defined profile and coordinated finish where the lock bolt engages. With availability in both broken and full box quantities, and a discount on full box orders, this strike aligns well with both small service tasks and larger production work. Choose this part number when a bright brass strike is needed to complete the locking function and visual continuity of CompX National disc or pin tumbler lock installations.
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  NLC2001-14A Mfr# C2001-14A | 2001 Formed Strike Plate for Locks, Bright Nickel |
Sold In: 1 Each