Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Strikes for Disc and Pin Tumbler Locks from CompX National provide the dedicated strike interface that disc and pin tumbler cylinders need, so the latch engages consistently and the lock can do its job on cabinets or doors using this hardware class. The strike size of 1-3/4 inch by 1/2 inch with a 3/16 inch form gives a defined target area for the lock bolt, which helps align the cylinder throw and reduces play at the closing edge over repeated use. The bright brass finish identified in the description gives a clean, traditional look that matches bright brass lock bodies, so visible hardware presents a uniform appearance on finished work where the strike is exposed. Being specified in the Locks and Latches - Lock Accessories category confirms this part is intended as the fixed counterpart to the cylinder, which keeps planning straightforward when laying out locking points across doors or cabinet faces.
The 1-3/4 inch by 1/2 inch size on this CompX National strike sets a predictable footprint on the frame or stile, which helps installers plan clearances so the disc or pin tumbler cylinder throw aligns cleanly with the strike. The 3/16 inch form provides the needed relief and shape at the strike edge, so the lock bolt has a defined seat rather than bearing against a flat surface, which supports smoother locking action. Because this strike is specified for use with disc and pin tumbler locks, its geometry is tailored to that style of cylinder, helping reduce trial-and-error when laying out hardware locations. The bright brass description also ties directly to bright brass locks, which supports projects where visible trim and locking components are coordinated.
This CompX National strike is identified for disc and pin tumbler locks, so it fits work where those lock types are chosen for door or cabinet security. The 1-3/4 inch by 1/2 inch footprint allows the strike to sit neatly on common frame or cabinet stile widths, which helps maintain edge distances that fabricators expect in woodworking layouts. As a strike in the Locks and Latches - Lock Accessories category, it serves as the fixed receiving point for the lock bolt, so it is used wherever a matching CompX National disc or pin tumbler cylinder is installed on a swinging panel. The bright brass description matches bright brass cylinders, which is valuable on projects where visible lock fronts and strikes need to share the same finish across multiple openings.
The defined 1-3/4 inch by 1/2 inch size helps standardize placement from job to job, so once fabricators dial in a layout for disc or pin tumbler locks using this strike, that pattern can be repeated across similar installations. The 3/16 inch form in the strike profile shapes the way the bolt lands, which supports a repeatable feel when locking and unlocking because the cylinder throw finds the same landing surface each cycle. The clear identification as a CompX National C2002-3 strike ties it directly to that manufacturers lock system, reducing confusion when matching strikes to specific tumbler lock bodies on larger projects. Being classified under Strikes and Lock Accessories keeps its role in the assembly straightforward, so it can be specified as the standard receiving component wherever compatible disc or pin tumbler locks are used.
This strike is described for disc and pin tumbler locks, so it serves as the receiving component for cylinders built around those lock mechanisms in the CompX National system.
The 1-3/4 inch by 1/2 inch size sets a consistent footprint on the frame or stile, helping installers position the strike so the tumbler lock bolt aligns accurately.
The 3/16 inch form creates a profiled landing area for the lock bolt, guiding it into place and supporting smoother, more repeatable engagement during locking.
The bright brass finish matches bright brass cylinders, so visible lock fronts and strikes share the same appearance on doors or cabinets.
The C2002-3 designation specifically identifies this CompX National strike, simplifying reorders and matching it to the correct disc or pin tumbler locks.
This strike functions as the stationary receiving point for the disc or pin tumbler lock bolt, completing the locking interface between door and frame.
This CompX National C2002-3 strike in bright brass, sized at 1-3/4 inch by 1/2 inch with a 3/16 inch form, is tailored to disc and pin tumbler locks, so it fits cleanly into projects built around that hardware family. By using a strike that matches the cylinder style and finish, installers can maintain consistent lock action and appearance across cabinet or door runs. For jobs relying on disc or pin tumbler mechanisms, this dedicated strike supports predictable engagement and a coordinated bright brass look.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  NLC2002-14A Mfr# C2002-14A | 2002 Formed Strike Plate with Countersunk, Bright Nickel |