Fastcap 9/16 inch unfinished white birch cover cap is a peel and stick wood screw cover from Fastcap designed to hide exposed fastener heads in woodworking projects. This 9/16 inch diameter cap is part of Fastcap screw cover caps and washers, so it is sized and shaped for covering typical fastener heads in cabinet and furniture assembly. The cover cap is made from unfinished white birch wood, which gives you a real wood surface to sand, stain, and finish to match surrounding birch components. Because it is a peel and stick design, it uses a PSA adhesive on the back of each cover cap that increases in strength as it cures, so you press it into place and it continues to bond more firmly over time. This combination of wood face and pressure-sensitive adhesive provides a fast way to conceal screw heads while keeping a wood-grain appearance.
This Fastcap wood peel and stick cover cap uses PSA adhesive on the back of each cover cap, so installation centers on pressing the cap over the screw head rather than driving mechanical fasteners. Because the adhesive increases in strength as it cures, the initial positioning stage is important for alignment directly over the fastener head or recess. Once pressed into place, the 9/16 inch diameter provides coverage over the screw while keeping the visible wood area tight to surrounding material, which helps maintain a clean layout on cabinet faces and panels. Using unfinished white birch wood also means the cap can be sanded and then stained or finished after installation, so finish work can be carried through the cap for a continuous look across the surface.
This Fastcap 9/16 inch unfinished white birch cover cap fits applications where exposed fastener heads in birch cabinetry, furniture, or millwork need to be concealed while keeping a wood appearance. The product is categorized as a screw cover cap and washer, so it is intended to sit over screws or similar fasteners in these assemblies. The 9/16 inch diameter is suited to screw heads used in many cabinet carcasses, stretchers, and face-frame joints, covering the metal while leaving a modest wood circle on the surface. Because the cap is made from unfinished white birch wood, it visually aligns with birch components before finishing, which is useful when building projects from matching birch stock. The real wood construction also matches the feel of adjacent parts, so the covered area behaves like surrounding material during later finishing steps. In shop production, using a dedicated Fastcap part such as FC.MB.916.WB simplifies part selection when projects specify birch with exposed screw locations that will be concealed later. The wood-peel-and-stick format keeps the part within the woodworking materials stream rather than introducing unrelated plastics into visible fields.
The PSA adhesive on the back of each Fastcap wood peel and stick cover cap supports a repeatable workflow because every cap relies on the same pressure-sensitive bonding method. Since the adhesive increases in strength as it cures, installers can press the cap into place during assembly and rely on the bond continuing to firm up after the initial pass, which is useful in production settings that move pieces along after each station. The 9/16 inch diameter dimension is consistent from cap to cap, so layout patterns over regular screw spacing remain visually even across doors, ends, or case sides. Unfinished white birch wood can be sanded, stained, and finished, allowing shops to run normal sanding and finishing operations across the caps and surrounding panels without special handling steps. The clear, non-yellowing lacquer used on pre-finished real wood cover caps in the same family defines how Fastcap treats matching finished versions, giving a reference point for shops that use both unfinished and pre-finished caps in different areas of the same project. Having the manufacturer part number FC.MB.916.WB tied specifically to this unfinished birch 9/16 inch cap improves repeat orders, so replacement caps maintain the same material and diameter across future maintenance or additional builds.
This Fastcap 9/16 inch cap is unfinished white birch wood, so it presents a real wood surface that can be sanded, stained, and finished to visually align with birch components.
The Fastcap wood peel and stick cover cap uses PSA adhesive on the back of each cover cap that increases in strength as it cures, so the bond tightens after the cap is pressed into position.
The FC.MB.916.WB Fastcap cover cap has a 9/16 inch diameter, which is sized to cover typical screw heads while keeping a compact appearance on cabinet and furniture surfaces.
This unfinished white birch wood cover cap can be sanded, stained, and finished, so finishing steps can be performed on site to match surrounding birch components and coatings.
This cap is an unfinished version within the Fastcap real wood cover cap line, while pre-finished versions use clear, non-yellowing lacquer for projects that need a finished cap out of the box.
A 9/16 inch unfinished birch cap covers screw heads with a modest wood circle and allows sanding, staining, and finishing, which suits birch cabinetry and furniture requiring concealed fasteners.
The Fastcap 9/16 inch unfinished white birch cover cap provides a peel and stick wood solution for concealing screw heads on birch projects, using PSA adhesive that strengthens as it cures to hold position. Its real unfinished birch surface can be sanded, stained, and finished, supporting consistent appearance across cabinet and furniture runs. When a job calls for hidden fasteners on birch components, this FC.MB.916.WB Fastcap cover cap offers a defined diameter, wood species, and adhesive format that align with shop sanding and finishing workflows.
Sold In: 1 Box
