Fastcap 9/16 inch unfinished cherry wood cover cap is a peel and stick screw cover cap designed to conceal fastener heads on wood projects using real cherry wood. The cover cap uses PSA adhesive on the back of each cover cap, providing a simple press-on application that saves installation time on site or in the shop. The PSA adhesive on back of each cover cap increases in strength as it cures, so the bond improves after initial placement, which supports longer-term hold during regular cabinet or furniture use. The cap is an unfinished wood cap, so it can be sanded, stained and finished for color and sheen matching with surrounding cherry components. This ability to sand, stain and finish lets installers blend fastener locations into custom work where exposed hardware would distract from the surface. The product is part of Fastcap wood peel and stick cover caps in the screw cover caps and washers class.
This Fastcap wood peel and stick cover cap uses PSA adhesive on the back of each cover cap, so installation is based on placing the cap directly over the screw or fastener location and pressing it into position, which streamlines the finishing phase. Because the PSA adhesive increases in strength as it cures, the cap seating becomes more secure after it has been applied, which supports continued adhesion as doors, drawer fronts, or panels are opened and closed. The unfinished cherry wood construction allows sanding, staining, and finishing after placement, so installers can align the cap surface with the final finishing schedule, which supports consistent color blending across the project.
This Fastcap 9/16 inch unfinished cherry wood peel and stick cover cap is suited to projects where visible screw heads on cherry wood need to be concealed using real wood. The product sits in the screw cover caps and washers class, so it is intended for situations where fasteners must be present structurally but should not remain visually obvious on finished faces. Because unfinished wood caps can be sanded, stained and finished, the cap can be integrated into custom cabinetry, furniture, or architectural trim that receives project-specific finishing schedules. The PSA adhesive on back of each cover cap supports use on interior panels, cabinet sides, or face frames where installers want a fast, adhesive-backed solution instead of on-site plug fabrication.
The 9/16 inch diameter of this Fastcap wood peel and stick cover cap is specified to align with common screw head and bore sizes, so it covers the fastener area while leaving a manageable footprint for sanding and finishing, which helps maintain the look of the panel. The PSA adhesive on back of each cover cap increases in strength as it cures, so once the cap is pressed firmly into place, the adhesive bond develops over time, which supports repeatable performance across many installations. Because the caps are unfinished wood caps that can be sanded, stained and finished, installers can use the same sanding passes and finishing products on the caps as on the surrounding cherry, which reduces rework caused by color mismatch. Being part of the Fasteners category and specifically the screw cover caps and washers product class, this cap is built for the task of concealing screws after structural assembly, which keeps the installation sequence straightforward from fastening through final finishing.
The Fastcap 9/16 inch peel and stick cover cap is an unfinished cherry wood cap, so it provides a real wood surface that can match surrounding cherry components after sanding and finishing.
The Fastcap cover cap uses PSA adhesive on back of each cover cap that increases in strength as it cures, so bond strength builds after application for continued hold in service.
The Fastcap unfinished wood cap can be sanded, stained and finished, so installers can align cap color and sheen with existing or new cherry finishes on the project.
The Fastcap 9/16 inch unfinished cherry wood peel and stick cover cap is sized at 9/16 inch diameter, so it is suited to covering typical screw heads and their immediate bore area.
The Fastcap cap is in the screw cover caps and washers product class, so it is used after fastening to conceal screw locations while leaving the structural joint intact.
This Fastcap product is an unfinished wood cap that can be sanded, stained and finished, so it is aimed at projects where finishing happens as part of the installation workflow.
The Fastcap 9/16 inch unfinished cherry wood peel and stick cover cap with PSA adhesive on back of each cover cap offers a straightforward way to conceal screw heads on cherry projects. By using an unfinished wood cap that can be sanded, stained and finished, the cap supports visual continuity with surrounding material. For fastening jobs that fall within the screw cover caps and washers category, this Fastcap option brings peel and stick installation together with finish-ready cherry, so fastener locations blend into the work rather than stand out.
Sold In: 1 Box
