Fastcap 9/16 inch unfinished natural birch cover cap is a peel and stick wood screw cover cap designed to hide exposed fastener heads in woodworking and cabinet projects, so visible screw points match surrounding birch surfaces. This Fastcap wood peel and stick cover cap uses PSA adhesive on the back of each cap, which increases in strength as it cures, so initial placement is straightforward while long-term bond performance improves over time on clean, stable substrates. The unfinished natural birch construction means the caps can be sanded, stained and finished, so installers can blend the cap into custom birch color work or match adjacent finished components. As a real wood cover cap in the screw cover caps and washers class, this part helps maintain a wood look at fastener locations instead of exposed metal, which supports a more consistent finished appearance on visible faces.
This Fastcap wood peel and stick cover cap uses PSA adhesive on the back of each cover cap, so installation consists of positioning the cap over the screw head and pressing it into place instead of using separate glue steps. As the PSA adhesive increases in strength as it cures, the bond develops over time, so caps stay where they are set under normal woodworking conditions once the adhesive has had time to cure. The 9/16 inch diameter sizing works with typical screw head footprints in cabinets and casework, so installers can select this size when the fastener and surrounding bore fall within that coverage area.
This Fastcap 9/16 inch unfinished natural birch wood peel and stick cover cap is positioned in the screw cover caps and washers product class, so it is intended anywhere exposed screw heads need a wood-faced cover. The real wood birch construction aligns with natural wood cabinetry and woodworking projects, so caps visually tie into birch components instead of introducing plastic textures in finished areas. With unfinished wood that can be sanded, stained and finished, these caps support use on projects where field finishing sets the final color, such as custom cabinets or trim where stain is selected on site. The 9/16 inch diameter option is one of two available diameters, 9/16 inch and 11/16 inch, so this specific size suits fastener locations where a more compact cover is appropriate.
The unfinished natural birch wood that can be sanded, stained and finished lets installers adjust the cap surface along with adjacent work, so color blending and sheen matching can be handled in the same passes as surrounding wood. Because the PSA adhesive on the back of each cover cap increases in strength as it cures, installers can set caps during the hardware phase and rely on progressive bond gain instead of relying on separate clamping steps. The defined 9/16 inch diameter creates a predictable coverage zone over screw heads, so layout and drilling patterns can be planned around a known cap footprint. Real wood construction in a cover cap ensures the visible surface at each fastener point is wood, so the finished field reads as continuous wood instead of showing contrasting fastener materials in key sightlines.
The Fastcap FC.SW.916.NB cover cap is used to cover exposed screw heads in wood projects, so fastener locations present a natural birch wood face instead of visible metal.
The PSA adhesive on the back of each cover cap allows simple peel and stick placement, and it increases in strength as it cures, so the cap bond improves after initial install.
The unfinished natural birch wood caps can be sanded, stained and finished, so their appearance can be adjusted to match surrounding birch or other coordinated finishes.
The 9/16 inch diameter defines the coverage area of each cap over a screw head, so planners can align fastener sizes and clearances to stay within that circular footprint.
These Fastcap cover caps are real wood caps in unfinished natural birch, so the visible surface is actual birch that can be worked like other unfinished wood components.
The Fastcap FC.SW.916.NB 9/16 inch unfinished natural birch cover cap is supplied as 1040 per box, so larger runs of cabinetry or woodworking can use a single box per job.
The Fastcap 9/16 inch unfinished natural birch wood peel and stick cover cap FC.SW.916.NB ties screw head coverage directly to real birch surfaces, so visible fasteners align with surrounding wood. With PSA adhesive that increases in strength as it cures and an unfinished surface that can be sanded, stained and finished, this cap supports both straightforward installation and custom finishing workflows. For projects planned around 9/16 inch screw head coverage in a natural birch look, this Fastcap part number provides a defined, repeatable solution.
Sold In: 1 Box
